Ruckus Wireless ZoneFlex 7363
abgn (AN600) | |
---|---|
ZoneFlex 7363 Access Point Indoor Dual-Band 802.11n AP | |
![]() | |
Homepage | |
Platform | |
Brand • Model • Rev |
Ruckus Wireless ZoneFlex 7363 |
Model Part Number |
ZF7363 |
FCC ID | |
IC ID | |
Type |
access point |
CPU1 | |
CPU1 Type |
MIPS 24K |
CPU1 Speed |
680 MHz 32-bit |
Flash1 Chip |
Macronix Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Micron MT46V16M16-5B K x 2 |
ETH chip1 | |
Switch |
Realtek RTL8363S |
Ethernet Port Count |
1-1GbE-WAN 2-100MbE-LAN |
802dot11 OUI: none specified | |
Stock FW OS |
U-Boot 1.1.4.54 |
Expansion IF types |
none specified |
PoE |
802.3af, standard |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Other | |
Default IP address: 192.168.0.1 | |
Manuf/OEM/ODM | |
Retail | |
FCC approval date | 05 March 2010 |
ASIN |
B005HDK0LE ![]() |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio 2 | |
Chip1 |
Atheros AR9223 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Ruckus Wireless device with specifications, see Ruckus Wireless.
Overview
Likely AR7161+AR9220+AR9223/AR9227 device..
10/100/1000 PoE port + 2x 10/100 ports
The Ruckus Wireless logo and "GD 11" is silkscreened on the board in the FCC photos. "FAB 100-11133-001 REV 3" is on the other side of the board.
Default credentials are per the FCC label. Per the FCC manual, the default SSID format is WirelessX (where X is a number).
Links of Interest
- Ruckus Wireless
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR7161
- Embedded System MIPS
- Embedded System 24K
- Embedded System Realtek
- Embedded System RTL8363S
- Manuf Senao
- Embedded System AR9220
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Embedded System AR9223
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation