Ruckus Wireless MediaFlex 2111 (VF2111)/Serial info

From TechInfoDepot
Jump to navigationJump to search

Boot log

boot log • >>
+setSpiSpeed: Reg: 0x00160014
board_configuration @ 0xa87e0000
Ethernet eth0: MAC address 00:13:92:08:5d:a7
Checking auto/recovery boot
v54_fis_get_image(1) 0x80EF0300 3
 Booting image rcks_wlan.main (3) type:1/0 ...
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> fis run -l rcks_wlan.main
RKS Header: offset=0x80, entry=0x80180040, len=1598031
Image loaded from 0x80041000-0x802be000
Now booting linux kernel:
 Base address 0x80030000 Entry 0x80180040
 Cmdline : console=ttyS0,9600r mem=0x00ffe000
Booting @ 0x80180040 ...
<4>CPU revision is: 00019064
<4>Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
<4>Primary data cache 16kB 4-way, linesize 16 bytes.
<4>Linux version 2.4.25-LSDK-5.0.0-RC5 (root@k2.video54.local) (gcc version 3.3.5) #2 Tue Sep 12 14:19:02 PDT 2006
<4>Determined physical RAM map:
<4> memory: 00ffe000 @ 00000000 (usable)
<4>mem_top = 0x81000000
<4>User-defined physical RAM map:
<4> memory: 00ffe000 @ 00000000 (usable)
<4>Initial ramdisk at: 0x801ab000 (1126400 bytes)
<4>On node 0 totalpages: 4094
<4>zone(0): 4094 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0,9600  console=ttyS0,9600r mem=0x00ffe000
<4>Using 92.000 MHz high precision timer.
<4>Calibrating delay loop... 183.50 BogoMIPS
<6>Memory: 13156k/16376k available (1261k kernel code, 3220k reserved, 1184k data, 80k init, 0k highmem)
<6>Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Checking for 'wait' instruction...  unavailable.
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with no serial options enabled
<6>ttyS00 at 0xb1100003 (irq = 37) is a 16550A
<6>Generic MIPS RTC Driver v1.0
<4>rd_size=6400 BLK_DEV_RAM_SIZE=5242
<4>RAMDISK driver initialized: 16 RAM disks of 6400K size 1024 blocksize
<4>MTD driver for SPI flash.
<4>spiflash: Probing for Serial flash ...
<4>spiflash: Found SPI serial Flash.
<4>8388608: size
<4>setSpiSpeed: Reg: 0x00160014
<4>flash page write circuit present !!!
<4>spi_flashPageWrite_set: !(spidata && spidata->mtd)
<4>parse_redboot_partitions: setting gpio 3 to input
<5>Creating 7 MTD partitions on "spiflash":
<5>0x00000000-0x00030000 : "RedBoot"
<5>0x00030000-0x00530000 : "rcks_wlan.main"
<5>0x00530000-0x00750000 : "rcks_wlan.bkup"
<5>0x00750000-0x007d0000 : "datafs"
<5>0x007d0000-0x007df000 : "FIS directory"
<4>mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
<5>0x007df000-0x007e0000 : "RedBoot config"
<4>mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
<5>0x007e0000-0x00800000 : "Board Data"
<4>spidata->mtd->write = spiflash_page_write
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 512 bind 1024)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>NET4: Ethernet Bridge 008 for NET4.0
<5>RAMDISK: LZMA image found at block 0
<4>lc=3 lp=0 pb=2 dictsize=1048576, outsize=6451200
<4>...............................
<4>LZMA initrd loaded successfully
<6>Freeing initrd memory: 1100k freed
<4>VFS: Mounted root (ext2 filesystem) readonly.
<6>Freeing unused kernel memory: 80k freed
<4>Algorithmics/MIPS FPU Emulator v1.5
max=16, i=14
watchdog ...            [started]  (0.0)
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/v54<6>v54_bsp: Version 1.0
<4>Copyright (c) 2004-2006 Ruckus Wireless, Inc.All Rights Reserved
<4>board_configuration(0xc0076c7c) @ 0x7e0000
_bsp.o
Warning:<4>radio_configuration(0xc0076cf8) @ 0x7f0000
 loading v54_bsp will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Initializing random number generator... done.
/dev/ram0 on / type ext2 (ro)
/proc on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw)
/dev/mtdblock4 on /writable type jffs2 (rw)
sys_init ...            [started]  (1.855)
timer ...exec /usr/sbin/timer ; pid=53
                [started] <4>mac[0] addr=001392085da7
 (0.1)
Starting network...
Using /lib/modules/<4>
<4>ethMac0: phyAddr 0 Phy ID=0143
2.4.25-LSDK-5.0.0-RC5/net/ae531x.o
Warning: loading ae531x will taint the kernel: non-GPL license - Atheros
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
<4>ethMac0: Phy Status=7809
network ...             [started]  (7.774)
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wlan.o
<6>wlan: 0.8.4.2 (Atheros/multi-bss)
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ath_hal.o
Warning: loading ath_hal will taint the <6>ath_hal: 0.9.16.1 (AR5212, AR5312, RF5111, RF5112, RF2413, RF5413, RF2316)
kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for informa<6>ath_rate_v54beamflex: Version 2.0.1
<4>Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<6>Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
tion about tainted modules
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ath_rate_v54beamflex.o
Warning: loading ath_rate_v54beamflex will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wlan_scan_ap.o
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wlan_scan_sta.o
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wlan_tkip.o
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wlan_wep.o
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wla<6>ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<4>../ar5312/ar5312_bsp.c: ar531x_boardConfig @ 0xc0076c7c
<4>             radioConfig @ 0xc0076cf8
n_ccmp.o
Using <4>ath_attach:q0123
<4>BeamFlex(TM) -- Copyright (C) 2005 Ruckus Wireless, Inc. (aka Video54) -- All rights reserved.
<4>BeamFlex antenna control enabled.
<4>if_ath.c compiled with AR_DEBUG is defined
<4>v54_mediaqueue: 108724 Bytes @ 805c0000
/lib/modules/2.4<4>Detected device with Ruckus hardware antenna control, model 1, ctrl 3.
.25-LSDK-5.0.0-R<4>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>wifi0: mac 11.0 phy 4.8 radio 7.0
<4>wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>wifi0: Use hw queue 8 for CAB traffic
<4>wifi0: Use hw queue 9 for beacons
<6>wifi0: Atheros 2315 WiSoC: mem=0xb0000000, irq=3
C5/net/wlan_xauth.o
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ath_ahb.o
wlan ...                [started]  (2.<6>device eth0 entered promiscuous mode
774)
rsm_bridge<6>device wlan0 entered promiscuous mode
 version $Id: rsm bridge 1.0$
<6>br0: port 1(eth0) entering learning state

ARPING to 255.255.255.255 from 255.255.255.255 via br0
Sent 1 probes (1 broadcast(s))
Received 0 reply
addDefaultRoute:217 Adding default route via dev:br0 gw:0.0.0.0 0
addDefaultRoute:221 SIOCADDRT for br0 failed with return value :22
ARPING to 255.255.255.255 from 192.168.0.254 via br0
<6>br0: port 1(eth0) entering forwarding state
<6>br0: topology change detected, propagating
Sent 3 probes (3 broadcast(s))
Received 0 reply
bridge ...              [started]  (2.235)
smartcast ...           [failed]  (0.18)
webserver ...           [started]  (0.3)
rsm_led ...             [started]  (0.3)
rfwd ...exec /usr/sbin/rfwd ; pid=100
                [started]  (0.1)
ping: sendto: Network is unreachable
Ping 204.2.106.105 failed
telnetd ...             [started]  (0.525)
sshd ...                [started]  (0.0)
snmpd ...               [started]  (0.0)
a
Please login: Starting Auto-Provisiong STA Service
SIOCGIFFLAGS: No such device
STA Reqest Period: 1 request/6 seconds
<4>Forcing antenna pattern to 63 (0x3F)
ping: sendto: Network is unreachable
Ping 204.2.106.105 failed