PC-Engines apu.1d
From TechInfoDepot
Jump to navigationJump to searchPC Engines apu.1d | |
Homepage | |
---|---|
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Incompatible |
Platform | |
Brand • Model • Rev |
PC-Engines apu.1d |
Type |
Router Firewall |
CPU1 |
AMD GET40E |
CPU1 Type |
x86-64 X86 |
CPU1 Speed |
1.0 GHz ( 2 cores ) |
Flash1 Chip |
Macronix MX25L1606EM2I-12G |
Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (SPI) |
Flash2 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (SD Card) |
RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (DDR2 SDRAM) |
RAM1 Chip |
SK hynix H5TQ2G83AFR-PBC x 8 |
ETH chip1 |
Realtek RTL8111E |
ETH chip2 |
Realtek RTL8111E |
ETH chip3 |
Realtek RTL8111E |
Ethernet Port Count |
1-1GbE-WAN 2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
| |
Expansion IF types |
USB 2.0, Mini PCIe, mSATA, SATA, SIM Card slot, SD Card slot |
SIM Card slot |
1 |
Mini PCIe slots |
2 |
USB ports |
2 |
SD/MMC Slots |
1 |
SATA Ports |
2 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 2 A |
Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) |
yes, console (DE-9), (115200 8N1) |
JTAG Port |
yes, 16-pin header, unpopulated, J13 |
Flags: RTC w/ battery, SIM Card slot, SD Card slot, UART, I2C, GPIO, buzzer, heatsink, metal case | |
Other | |
| |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
(Est.) release date | April 2014 |
Country of manuf | Switzerland |
For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented PC-Engines device with specifications, see PC-Engines.
Overview
Hardware specification
- CPU: AMD G series T40E @1.0GHz Dual-core 64bit X86
- Storage: 2MB SPI Flash, 8GB SD Card, mSATA, SATA
- Memory: 2GB (DDR3) SDRAM
- Network: 3x Gigabit Ethernet ports
- USB: 2x USB 2.0 host port
- PCI: 2x Mini PCIe slots
- Power: 12V, 2A via barrel
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = x86_64 version
- write image via physdiskwrite to SD-card or m-SATA
Please insert instructions here
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 17.01.2
Current supported version: 23.05.0
On the OpenWrt Wiki
Support started version: 17.01.2
Current supported version: 23.05.0
Please insert instructions here