OvisLink Evo-W311AR

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
wireless router
Evo-W311AR-case.jpg
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
OvisLink Evo-W311AR
FCC ID
none specified
Type
wireless router
CPU1
Realtek RTL8196E
CPU1 Type
Lexra RLX4181
CPU1 Speed
400 MHz
Flash1 Chip
GigaDevice GD25Q16BSIG
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
Winbond W9812G6JH-6
ETH chip1
Realtek RTL8196E
Switch
Realtek RTL8196E
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:1D:1A (-, 8 W)
Ethernet OUI: 00:1D:1A (-, 8 W)

Expansion IF types
none specified
Power
9 VDC, 0.5 A
Connector type
barrel
Other

Default SSID: OvisLink
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 795 additional devices
of which 0 are OvisLink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 0 are OvisLink devices

Retail
Availability End of Life
(Est.) release date 2012
(Est.) initial retail price (in USD): $20
Country of manuf China
Radio 1
Chip1
Realtek RTL8188ER
Wireless interface OUI
00:1D:1A
Antenna Connector Type
RP-SMA
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented OvisLink device with specifications, see OvisLink.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

JTAG-Serial Info

Serial

Serial Pinouts

  • baudrate: 38400
VCC TX RX GND
Boot log
Boot log
Booting...

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c84015h 00000c8h 0000040h 0000015h 0000000h 0000015h 0200000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000020h 0001000h 0000200h 0000100h 0000010h 000004eh GD25Q16
@ 
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
---RealTek(RTL8196E)at 2012.07.06-04:36+0900 v0.4 [16bit](400MHz)
Delay 1 second till reset button
Magic Number: raw_nv 00000000
Check Firmware(05020000) : size: 0x001c3fc8 ---->[ OK ]
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
early printk enabled 
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 console=0 single
Calibrating delay loop... 398.95 BogoMIPS
Memory: 9500k/16384k available (2310k kernel code, 6884k reserved, 416k data, 60k init, 0k highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
check_wait... unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Serial driver version 6.02 (2003-03-12) with no serial options enabled
ttyS00 at 0x2000 (irq = 5) is a rtl_uart1
state->flags=00000000
Realtek GPIO Driver for Flash Reload Default
Init IPTIME GPIO: 
block: 64 slots per queue, batch=16
PPP generic driver version 2.4.1
MPPE/MPPC encryption/compression module registered
SPI INIT
flash device: 0x200000 at 0xbd000000
probe realtek
capacity_id 15
capacity_id 15
get SPI CS0
maker:c8  type:40  sector_cnt:0

MXIC matched!!get SPI chip driver!
Physically mapped flash: Found an alies 0x200000 for the chip at 0x0, EON device detect.
probe ends
probe realtek2
Creating 2 MTD partitions on "Physically mapped flash":
0x00000000-0x00200000 : "boot+cfg+linux+rootfs"
0x000d0000-0x00200000 : "root fs"
RealTek E-Flash System Driver. (C) 2002 RealTek Corp.
Cannot find driver for DiskOnChip Millennium at 0x6000
Realtek WLAN driver - version 1.6 (2013-02-21)
 wlan_index:0  0, 134,0xb9000000,0xb8b10000,21
=====>>INSIDE rtl8192cd_init_one <<=====
PCIE reset (0) 
Do MDIO_RESET
98 - 25MHz Clock Source
Find Port=0 Device:Vender ID=817910ec
vendor_deivce_id=817910ec
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
Realtek 865x Ethernet driver v0.6 (Mar 26, 2008)
eth0: RTL865x-NIC at 0xbb804000, 00:00:00:00:00:11, IRQ 2
eth1: RTL865x-NIC at 0xbb804000, 00:00:00:00:00:22, IRQ 2
eth2: RTL865x-NIC at 0xbb804000, 00:e0:4c:f0:00:02, IRQ 2
eth3: RTL865x-NIC at 0xbb804000, 00:e0:4c:f0:00:03, IRQ 2
eth4: RTL865x-NIC at 0xbb804000, 00:e0:4c:f0:00:04, IRQ 2
=> rtl865x_ioctl init
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
==> create_proc_ipclone() form DEV.c 
ip_conntrack version 2.1 (512 buckets, 1024 max) - 384 bytes per conntrack
IPSEC netfilter connection tracking: registered
IPSEC netfilter NAT helper: NETDETECT target register
ip_nat_bnet: Trying to register for port 6112
FTP proc OK....
ip_ct_ftp: registering helper for port 21
ip_ct_ftp: # of port 1
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 60k freed
mount /proc file system ok!
mount /tmp  file system ok!
---> /sbin/init doing 
alias:w311ar version:8.76
Restore Config ( 4334 bytes )
etc/wireless.conf.wps.wlan0
etc/wireless.conf.wlan0
etc/udhcpd.leases
etc/udhcpd.conf
etc/services
etc/resolv.conf
etc/pptpd.conf
etc/ppp
etc/ppp/options.pptpd
etc/passwd
etc/miniupnpd.conf
etc/mime.types
etc/messages
etc/ippool.set
etc/ippool.conf
etc/igmpproxy.conf
etc/iconfig.cfg
etc/httpd.passwd
etc/hosts
etc/group
etc/fwsched_netfilter.set
etc/fwsched.set
etc/defaultip
Set WAN PORT



=================================================================
press magic key to change default setting ...
  LAN MAC : 00:1D:1A:13:E9:28
  WAN MAC : 00:1D:1A:13:E9:29
Bridge Init
device wlan0-va0 is not a slave of br0
device wlan0-va1 is not a slave of br0
device wlan0-va2 is not a slave of br0
Interface doesn't accept private ioctl...
set_mib (89F1): Operation not permitted
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: No chain/target/match by that name
Jan  1 00:00:11 miniupnpd[197]: Reloading rules from lease file
Jan  1 00:00:11 miniupnpd[197]: could not open lease file: /var/run/upnp_pmlist
Jan  1 00:00:11 miniupnpd[197]: HTTP listening on port 2048
PPTP Server Start!!
insmod: not found
killall: iapp: no process killed
killall: wscd: no process killed
killall: iwcontrol: no process killed
SIGNAL -> Config Update signal progress
Check DHCP PID Elapsed Time: 1
killall: pppoe-relay: no process killed
SIGNAL -> WAN ip changed
Reaped 223
Reaped 212
Reaped 196
Reaped 195
iptables: Bad rule (does a matching rule exist in that chain?)

To enter into the bootloader failsafe CLI press the ESC key when booting up the device.

Booting...
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c84015h 00000c8h 0000040h 0000015h 0000000h 0000015h 0200000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000020h 0001000h 0000200h 0000100h 0000010h 000004eh GD25Q16
@ 
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
---RealTek(RTL8196E)at 2012.07.06-04:36+0900 v0.4 [16bit](400MHz)
Delay 1 second till reset button
Magic Number: ����nv 00000000
Check Firmware(05020000) : size: 0x001c3fc8 ---->[ OK ]

---Escape booting by user
P0phymode=01, embedded phy

---Ethernet init Okay!
<RealTek>
Unknown command !
<RealTek>?
----------------- COMMAND MODE HELP ------------------
HELP (?)                                    : Print this help message
DB <Address> <Len>
DW <Address> <Len>
EB <Address> <Value1> <Value2>...
EW <Address> <Value1> <Value2>...
CMP: CMP <dst><src><length>
IPCONFIG:<TargetAddress>
AUTOBURN: 0/1
LOADADDR: <Load Address>
J: Jump to <TargetAddress>
FLR: FLR <dst><src><length>
FLW <dst_ROM_offset><src_RAM_addr><length_Byte> <SPI cnt#>: Write offset-data to SPI from RAM
MDIOR:  MDIOR <phyid> <reg>
MDIOW:  MDIOW <phyid> <reg> <data>
PHYR: PHYR <PHYID><reg>
PHYW: PHYW <PHYID><reg><data>
PORT1: port 1 patch for FT2
<RealTek>


Make a backup
  • In the bootloader CLI execute the command:
    flr 80500000 0 200000
  • In your computer execute the command:
    tftp 192.168.1.6 -m binary -c get flash-backup.bin

This is a backup made with this procedure: w311ar-flash-backup.zip

Pictures

User Images