NetweeN C140T

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
wireless router
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
NetweeN C130A
FCC ID
Type
wireless router
CPU1
Ralink Model?
Flash1 Chip
Spansion Model?
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
Brand? Model?
ETH chip1
Ralink Model?
Switch
Ralink Model?
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:25:A6 (1 E, 1 W)
Ethernet OUI: 00:25:A6 (1 E, 1 W)

Expansion IF types
none specified
Power
5 VDC, 2 A
Connector type
barrel
Other

Default SSID: NetweeN (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1308 additional devices
of which 1 are NetweeN devices

Retail
FCC approval date 19 June 2012
Country of manuf China
Radio 1
Chip1
Ralink Model?
Wireless interface OUI
00:25:A6
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"800000103" and "V1.0 [A31]" is silkscreened on the board in the FCC photos.

This device probably uses RT3050.

FCC external photos show the device with a model of C130A.

The default IP is from the FCC submitted manual. The default SSID is assumed to be NetweeN (it's in the manual and it has WiGLE support). Assumed 00:25:A6 OUI..