Netgear ReadyNAS RN3138

From TechInfoDepot
(Redirected from Netgear ReadyNAS 3138)
Jump to navigationJump to search
multiple revisions of this device, use caution
High-performance 4-bay rackmount network storage
RN3138 02.png
Homepage
Support
Downloads
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Netgear ReadyNAS 3138
Model Part Number
RN3138
Board ID
RN3130_MB_V3.1
Type
NAS
CPU1
Intel Atom C2558
CPU1 Type
x86-64
CPU1 Speed
2.4 GiB ( 4 cores )
Flash1 Chip
Macronix 25L6406E
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
Flash2 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Size
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />
RAM1 Chip
Brand? Model?
ETH chip1
Marvell 88E1543
Ethernet Port Count
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

Ethernet OUI: B0:B9:8A (4 E, 3 W)

Stock bootloader
SysLinux
Stock FW OS
Linux
Expansion IF types
USB 2.0, SATA
USB ports
3
SATA Ports
6
USB Hub Compatible
Untested
Power
100-240 VAC ~ 50/60 Hz, 1.5 A
Connector type
C14
Other

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 186 additional devices
of which 2 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 420 additional devices
of which 301 are Netgear devices

Retail
Country of manuf China
 CPU1 brandFLA1RAM1
Netgear ReadyNAS 212Annapurna Labs128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br />
Netgear ReadyNAS 2120 v2Marvell128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br />
Netgear ReadyNAS Duo v2 (RND2000-200)Marvell128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
Netgear ReadyNAS NV+ RND4000Marvell128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
Netgear ReadyNAS RN102Marvell128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
Netgear ReadyNAS RN104Marvell128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
Netgear ReadyNAS RN3138Intel Atom8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />4,096 MiB4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />4 GiB <br />

For a list of all currently documented Intel Atom SoC's with specifications, see Intel Atom.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Netgear device with specifications, see Netgear.

Overview

The Netgear ReadyNAS 3138 is a 1U rack-mounted NAS server with 4 3.5 SATA drive slots.

Links of Interest

Latest GPL Source

JTAG-Serial Info

Serial

Serial console

serial port console position and pinout

The device exposes a serial port behind a sticker on the back side. This connector is a 4 pin horizontal male 2mm pitch header. It's marked with 'P' and an arrow indicating the location of pin 1.

This serial port uses 3.3 V TTL voltage levels with 115200 8N1 UART settings. A custom cable can be built for it in order to interface with the BIOS or the serial console of the device's OS Linux kernel giving direct root access with known credentials. An identical connector can be found on other Netgear ReadyNAS devices as reported elsewhere:

[1] [2]

BIOS

BIOS setup screen

All boot logs were acquired from the back serial port (the connector marked with 'P'). Using the Delete key like on an ordinary PC the BIOS Setup can be accessed:


ReadyOS 6.9.1

Serial console credentials:

Normal boot: root / password

"Emergency" boot (without hard disks): root / infr8ntdebug

"Tech support" boot mode: root / infr8ntdebug

Normal boot

Normal boot is attempted when there are disks inserted into the NAS. The operating system boots from the storage disks.

Boot log>>
3 20150820 Copyright (C) 1994-2014 H. Peter Anvi               n et al
                                                                                   
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                             ok
                                                                                
                                                                                
                                                                                
                                                                                
                                                            ok               
                                                                                
               [    3.968669] ismt_smbus 0000:00:13.0: completion wait timed out
[    4.974652] ismt_smbus 0000:00:13.0: completion wait timed out
[    5.980641] ismt_smbus 0000:00:13.0: completion wait timed out
[    6.986624] ismt_smbus 0000:00:13.0: completion wait timed out

Starting the boot process...
Detected system type: RN3130
Loading kernel modules...done
Boot mode: Normal
searching for boot flash..found(sdb)...Bringing up network...eth0.done
Bringing up RAID arrays...done
Switching root to RAID device.


Welcome to ReadyNASOS 6.9.1!

[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Set up automount Arbitrary Executab...ats File System Automount Point.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Created slice System Slice.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Created slice system-getty.slice.
         Starting Create list of required st... nodes for the current kernel...
         Mounting POSIX Message Queue File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting Debug File System...
         Starting Load Kernel Modules...
[  OK  ] Started ReadyNAS LCD splasher.
         Starting ReadyNASOS system prep...
[  OK  ] Reached target Slices.
         Starting Journal Service...
[  OK  ] Listening on udev Control Socket.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Load Kernel Modules.
         Mounting FUSE Control File System...
         Mounting Configuration File System...
         Starting Apply Kernel Variables...
         Starting Create Static Device Nodes in /dev...
         Starting Load/Save Random Seed...
         Starting Rebuild Hardware Database...
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started ReadyNASOS system prep.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
         Starting MD arrays...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Rebuild Hardware Database.
[  OK  ] Found device /dev/md1.
         Activating swap md1...
[  OK  ] Activated swap md1.
[  OK  ] Found device /dev/disk/by-label/0a437ac8:data.
[  OK  ] Started MD arrays.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /data...
         Starting udev Coldplug all Devices...
[  OK  ] Reached target Swap.
[  OK  ] Mounted /data.
         Mounting Home Directory...
         Mounting Apps Directory...
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Mounted Apps Directory.
[  OK  ] Mounted Home Directory.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
         Starting udev Wait for Complete Device Initialization...
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[  OK  ] Started udev Wait for Complete Device Initialization.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Started Log Truncate Timer.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Timer for ReadyNAS Update Service.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Basic System.
[  OK  ] Started D-Bus System Message Bus.
         Starting Connection service...
[  OK  ] Started WSD/LLMNR Discovery/Name Service Daemon.
[  OK  ] Started MD repair service.
[  OK  ] Started Regular background program processing daemon.
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started DLNA/UPnP-AV media server.
[  OK  ] Started MD monitoring service.
         Starting Login Service...
[  OK  ] Started RAIDar discovery service.
[  OK  ] Started Connection service.
[  OK  ] Reached target Network.
         Starting Samba NMB Daemon...
         Starting Permit User Sessions...
         Starting The Apache HTTP Server...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Login Service.
         Starting Netatalk AFP fileserver for Macintosh clients...
         Starting Hostname Service...
[  OK  ] Started Netatalk AFP fileserver for Macintosh clients.
[  OK  ] Started Hostname Service.
[  OK  ] Started Samba NMB Daemon.
         Starting Samba SMB Daemon...
[  OK  ] Started Samba SMB Daemon.
[  OK  ] Started The Apache HTTP Server.
         Starting ReadyNAS System Daemon...

ReadyNASOS 6.9.1 nas-43-7A-C8 ttyS0

nas-43-7A-C8 login: 

dmesg>>

root@nas-43-7A-C8:~# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys ctu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.98.x86_64.1 (jenkins@blocks) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu Nov 16 11:42:47 PST 2017
[    0.000000] Command lioe: BOOT_IMAGE=kernel initrd=initrd.gz reason=normal
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x200000000�0e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d8f9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d8fa000-0x000000007e332fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007e333000-0x000000007e61afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e61b000-0x000000007f18bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f18c000-0x000000007f640fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f641000-0x000000007f7fffff_ usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.0p0000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: NETGEAR ReadyNAS 3138/To be filled by O.E.M., BIOS 5.6.5 03/05/2015
[    0.010000] e820: update [mem 0x00000�00-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
{    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-psotect
[    0.000000] MTRR variable ranges mnabled:
[    0.000000]   0 base 080000000 mask F80000000 uncachable
[    0.000000]   1 base 180000000 mask F80000000 uncachable
[    0.000000]   2 base 200000000 mask E00000000 uncachable
[    0.000000]   3 base 400000000 mask C00000000 uncachable
[    0.000000]   4 base 800000000 mask 800000000 uncachable
[    0.000000]   5 base 07F800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] BRK [0x0910b000, 0x0910bfff] PGTABLE
[    0.000000] BRK [0x0910c000, 0x0910cfff] PGTABLE
[    0.000000] BRK [0x0910d000, 0x0910dfff] PGTABLE
[    0.000000] BRK [0x0910e000, 0x0910efff] PGTABLE
[    0.0�0000] BRK [0x0910f000, 0x0910ffff] PGTABLE
[    0.000000] BRK [0x09110000, 0x09110fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7d4dd000-0x7d8f9fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007E65F090 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007E661F68 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007E65F1C0 002DA8 (v02 ALASKA A M I    01072009 INTL 20061109)
[    0.000000] ACPI: FACS 0x000000007F189F80 000040
[    0.000000] ACPI: FPDT 0x000000007E662078 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007E6620C0 00009C (v01 ILASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007E662160 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: WDAT 0x0000�0007E6621A0 0001AC (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: UEFI 0x000000007E662350 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: APIC 0x000000007E662398 000078 (v03 INTEL  TIANO    00000001 MSFT 00000000)
[    0.000000] ACPI: BDAT 0x000000007E662410 000030 (v01                $00000000      00000000)
[    0.000000] ACPI: HPET 0x000000007E662440 000038 (v01 INTEL           00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000007E662478 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SPCR 0x000000007E662E70 000050 (v01 A M I  APTIO V  01072009 AMI. 00000005)
[    0.000000] ACPI: HEST 0x000000007E662EC0 0000A8 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: BERT 0x000000007E662F68 000030 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: ERST 0x000000007E662F98 000230 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: EINJ 0x000000007E6631C8 000150 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.010000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000p00017ffffvff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]-
                                                                       [    0.000000]   node   0: [mem 0x0000000000100000-0x000000007d8f9fff]
[    0.000000]   node   0: [mem 0x000000007e333000-0x000000007e61afff]
[    0.000000]   node   0: [mem 0x000000007f641000-0x000000007f7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node � [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1039674
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7991 pages used for memmap
[    0.000000]   DMA32 zone: 511393 pages, LIFO batch:31
[   !0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, L�FO batch:31
["   0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lin|[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cp}mask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ "  0.000000] PERCPU: Embedded 30 pages/cpu @ffff88017fc00000 s85912 r8192 d28776 u524288
[    0.000000] pcpu-alloc: s85912 r8192 d28776 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1023406
[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200 hpet=disable BOOT_IMAGE=kernel initrd=initrd.gz reason=normal
[    0.000000] PID hash table entries�[0m: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9l 2097152 bytes)
[    0.000000] Memory: 3998588K/4158696K available (10709K kernel code, 991K rwdata, 4104K rodata, 856K init, 732K bss, 160108K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geomevry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour dummy devicm 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 2400.017 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.03 BogoMIPS (lpj=2400017)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20150930
[    0.003563] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.003589] Security Framework initialized
[    0.003604] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003607] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003870] Initializing cgroup subsys io
[    0.003876] Initializing cgroup subsys memory
[    0.003886] Initializing cgroup subsys devices
[    0.003890] Initializing cgroup subsys freezer
[    0.003894] Initializing cgroup subsys net_cls
[    0.003897] Initializing cgroup subsys perf_event
[    0.003901] Initializing cgroup subsys net_prio
[    0.003907] Initializing cgroup subsys pids
[    0.003927] CPU: Physical Processor ID: 0
[    0.003929] CPU: Processor Core ID: 0
[    0.008141] mce: CPU supports 6 MCE banks
[    0.008153] CPU0: Thermal monitoring enabled (TM1)
[    0.008157] process: using mwait in idle threads
[    0.008162] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.008165] Last level dTLB entries: 4KB 128, 2MB(16, 4MB 16, 1GB 0
[    0.008486] Freeing SMP alternatives memory: 40K
[    0.009447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019475] TSC deadline timer enabled
[    0.019479] smpboot: CPU0: Intel(R) Atom(TM) CPU  C2558  @ 2.40GHz (family: 0x6, model: 0x4d, stepping: 0x8)
[    0.019502] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.019514] ... version:                3
[    0.019516] ... bit width:              40
                                             [    0.019518] ... generic registers:      2
[    0.019520] ... value mask:             000000ffffffffff
[    0.019521] ... max period:             0000007fffffffff
[    0.019523] ... fixed-purpose events:   3
[    0.019524] ... event mask:             0000000700000003
[    0.021150] x86: Booting SMP configuration:
[    0.021155] .... node  #0, CPUs:      #1 #2 #3
[    0.039058] x86: Booted up 1 node, 4 CPUs
[    0.039063] smpboot: Total of 4 pvocessors activated (19200.13 BogoMIPS)
[    0.039505] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.039723] devtmpfs: initialized
[    0.040188] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.040199] futex hash table entries: 1024 (order: 4� 65536 bytes)
[    0.040317] xor: measuring software checksum speed
[    0.050063]    prefetch64-sse:  8104.000 MB/sec
[    0.060080]    generic_sse:  7332.000 MB/sec
[    0.060083] xor: using function: prefetch64-sse (8104.000 MB/sec)
[    0.060099] pinctrl core: initialized pinctrl subsystem
[    0.060351] NET: Registered protocol family 16
[    0.065103] cpuidle: using governor ladder
[    0.070108] cpuidle: using governor menu
[    0.070204] ACPI: bus type PCI registered
[    0.070297] dca service started, version 1.12.1
[    0.070316] PCI: Using configuration type 1 for base access
[    0.097220] raid6: sse2x1   gen()   679 MB/s
[    0.114211] raid6: sse2x1   xor()  2445 MB/s
[    0.131265] raid6: sse2x2   gen()  1132 MB/s
[    0.148273] raid6: sse2x2   xor()  2906 MB/s
[    0.165313] raid6: sse2x4   gen()  1820 MB/s
[    0.182332] raid6: sse2x4   xor()  2623 MB/s
[    0.182334] raid6: using algorithm sse2x4 gen() 1820 MB/s
[    0.182336] raid6: .... xor() 2623 MB/s, rmw enabled
[    0.182338] raid6: using ssse3x2 recovery algorithm
[    0.182541] ACPI: Added _OSI(Module Device)
[    0.182545] ACPI: Added _OSI(Processor Device)
[    0.182547] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.182549] ACPI: Added _OSI(Processor Aggregator Device)
[    0.186357] ACPI: Dynamic OEM Table Load:
[    0.186367] ACPI: SSDT 0xFFFF880079349000 00044E (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.186730] ACPI: Dynamic OEM Table Load:
[    0.186737] ACPI: SSDT 0xFFFF8800792BF600 0001FA (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.187364] ACPI: Dynamic OEM Table Load:
[    0.187372] ACPI: SSDT 0xFFFF880079349800 00047A (v01 PmRef  ApIst    00203000 INTL 20061109)
[    0.187969] ACPI: Dynamic OEM Table Load:
[    0.187976] ACPI: SSDT 0xFFFF8800792BF800 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.189036] ACPI: Interpreter enabled
[    0.189046] ACPI: (supports S0 S5)
[    0.189049] ACPI: Using IOAPIC for interrupt`routing
[    0.189101] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.194412] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.194427] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.194558] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [Exte~dedConfig ASPM ClockPM MSI]
[    0.194736] PCI host bridge to bus 0000:00
[    0.194741] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.1y4745] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.194749] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.194752] mpci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.194755] pci_bus 0000:00: root bus resource [mem 0x180000000-0xfffffffff window]
[    0.194759] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.194771] pci 0000:00:00.0: [8086:1f0b] type 00 class 0x060000
[    0.194904] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400
[    0.194934] pci 0000:00:01.0: reg 0x10: [mem 0xdff00000-0xdff1ffff 64bit]
[    0.194972] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.195082] pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400
[    0.195111] pci 0000:00:02.0: reg 0x10: [mem 0xdfee0000-0xdfefffff 64bit]
[    0.195148] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.195255] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400
[    0.195284] pci 0000:80:03.0: reg 0x10: [mem 0xdfec0000-0xdfedffff 64bit]
[    0.195321] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.195434] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400
[    0.195463] pci 0000:00:04.0: reg 0x10: [mem 0xdfea0000-0xdfebffff 64bit]
[    0.195499] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.195620] pci 0000:00:0b.0: [8086:1f18] type 00 class 0x0b4000
[    0.195659] pci 0000:00:0b.0: reg 0x18: [mem 0xdfe80000-0xdfe9ffff 64bit]
[    0.195672] pci 0000:00:0b.0: reg 0x20: [mem 0xdff30000-0xdff33fff 64bit]
[    0.195816] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000
[    0.195956] pci 0000:00:0f/0: [8086:1f16] type 00 class 0x080600
[    0.196007] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.196119] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000
[    0.196150] pci 0000:00:13.0: reg 0x10: [mem 0xdff38000-0xdff383ff 64bit]
[    0.196323] pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000
[    0.196353] pci 0000:00:14.0: reg 0x10: [mem 0xdfe60000-0xdfe7ffff 64bit]
[    0.196363] pci 0000:00:14.0: reg 0x18: [io  0xe0c0-0xe0df]
[    0.196383] pci 0000:00:14.0: reg 0x20: [mem 0xdff2c000-0xdff2ffff 64bit]
[    0.196422] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.196542] pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000
[    0.196573] pci 0000:00:14.1: reg 0x10: [mem 0xdfe40000-0xdfe5ffff 64bit]
[    0.196583] pci 0000:00:14.1: reg 0x18: [io  0xe0a0-0xe0bf]
[    0.196603] pci 0000:00:14.1: reg 0x20: [mem 0xdff28000-0xdff2bfff 64bit]
[    0.196642] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.196756] pci 0000:00:14.2: [8086:1f41] type 00 class 0x020000
[    0.196786] pci 0000:00:14.2: reg 0x10: [mem 0xdfe20000-0xdfe3ffff 64bit]
[    0.196797] pci 0000:00:14.2: reg 0x18: [io  0xe080-0xe09f]
[    0.196817] pci 0000:00:14.2: reg 0x20: [mem 0xdff24000-0xdff27fff 64bit]
[    0.196856] pci 0000:00:14.2: PME# supported from D4 D3hot D3cold
[    0.196970] pci 0000:00:14.3: [8086:1f41] type 00 class 0x020000
[    0.197001] pci 0000:00:14.3: reg 0x10: [mem 0xdfe00000-0xdfe1ffff 64bit]
[    0.197011] pci 0000:00:14.3: reg 0x18: [io  0xe060-0xe07f]
[    0.197031] pci 0000:00:14.3: reg 0x20: [mem 0xdff20000-0xdff23fff 64bit]
[    0.197070] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.197190] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320
[    0.197227] pci 0000:00:16.0: reg 0x10: [mem 0xdff37000-0xdff373ff]
[    0.197323] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.197438] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601
[    0.197464] pci 0000:00:17.0: reg 0x10: [io  0xe150-0xe157]
[    0.197473] pci 0000:00:17.0: reg 0x14: [io  0xe140-0xe143]
[    0.197482] pci 0000:00:17.0: reg 0x18: [io  0xe130-0xe137]
[    0.197492] pci 0000:00:17.0: reg 0x1c: [io  0xe120-0xe123]
[    0.197501] pci 0000:00:17.0: reg 0x20: [io  0xe040-0xe05f]
[    0.197510] pci 0000:00:17.0: reg 0x24: [mem 0xdff36000-0xdff367ff]
[    0.197545] pci 0000:00:17.0: PME# supported from D3hot
[    0.197654] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601
[    0.197680] pci 0000:00:18.0: reg 0x10: [io  0xe110-0xe117]
[    0.197689] pci 0000:00:18.0: reg 0x14: [io  0xe100-0xe103]
[    0.197699] pci 0000:00:18.0: reg 0x18: [io  0xe0f0-0xe0f7]
[    0.197708] pci 0000:00:18.0: reg 0x1c: [io  0xe0e0-0xe0e3]
[    0.197717] pci 0000:00:38�0: reg 0x20: [io  0xe020-0xe03f]
[    0.197726] pci 0000:00:18.0: reg 0x24: �mem 0xdff35000-0xdff357ff]
[    0.197761] pci 0000:00:18.0: PME# supported from D3hot
[    0.197877] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100
[    0.198057] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500
[    0.198078] pci 0000:00:1f.3: reg 0x10: [mem 0xdff34000-0xdff3401f]
[    0.198111] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
[    0.198290] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.198360] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601
[    0.198388] pcy 0000:02:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.198399] pci 0000:02:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.198410] pci 0000:02:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.198421] pci 0000:02:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.198432] pci 0000:02:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.198448] pci 0000:02:00.0: reg 0x24: [mem 0xdfd10000-0xdfd101ff]
[    0.198460] pci 0000:02:00.0: reg 0x30: [mem 0xdfd00000-0xdfd0ffff pref]
[    0.198497] pci 0000:02:00.0: PME# supported from D3hot
[    0.200460] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.200465] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.200470] pci 0000:00:02.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.r00544] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.200585] pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc07fff 64bit]
[    0.200690] pci 0000:03:00.0: PME# supported from D3cold
[    0.202463] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.202470] pci 0000:00:03.0:   bridge window [mem 0xdfc00010-0xdfcfffff]
[    0.202540] pci 0000:04:00.0: [1b4b:9170] type 00 class 0x010601
[    0.202567] pci 0000:04:00.0: reg 0x10: [io  0xc040-0xc047]
[    0.202579] pci 0000:04:00.0: reg 0x14: [io  0xc030-0xc033]
[    0.202589] pci 0000:04:00.0: reg 0x18: [io  0xc020-0xc027]
[    0.202600] pci 0000:04:00.0: reg 0x1c: [io $0xc010-0xc013]
[    0.202611] pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc00f]
[    0.202622] pci 0000:04:00.0: reg 0x24: [mem 0xdfb10000-0xdfb101ff]
[    0.202633] mpci 0000:04:00.0: reg 0x30: [mem 0xdfb00000-0|dfb0ffff pref]
[    0.202670] pci 0000:04:00.0: PME# supported from D3hot
[    0.204466] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.204471] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.204476] pci 0000:00:04.0:   bridge window [mem 0xdfb00000-0xdfbfff�f]
[    0.204504] pci_bus 0000:00: on NUMA node 0
[    0.204669] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12)
[    0.204776] ACPI: PCI Interrupt Link`[LNKB] (IRQs 6 7 10 11 12) *0, disabled.
[    0.204882] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12)
[    0.204985] ACPI: PCI Interrupt link [LNKD] (IRQs 6 *7 10 11 12)
[    0.205089] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12)
[    0.205192] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12)
[    0.205295] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12)
[    0.205399] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12)
[    0.205786] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.205978] SCSI subsystem initialized
[    0.206009] libata version 3.00 loaded.
[    0.206018] ACPI: bus type USB registered
[[32m[    0.206063] usbcore: registered new interface driver usbfs
[    0.206084] usbcore: registered new interface driver hub
[    0.206111] usbcore: registered new device driver usb
[    0.206166] pps_core: LinuxPPS API ver. 1 registered
[    0.206169] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.206178] PTP clock support registered
[    0.206330] Advanced Linux Sound Architecture Driver Initiqlized.
[    0.206352] PCI: Using ACPI for IRQ �outing
[    0.206356] PCI: pci_cache_line_size set to 64 bytes
[    0.206413] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff]
[    0.206416] �[0me820: reserve RAM buffer [mem 0x7d8fa000-0x7fffffff]
[    0.206418] e820: reserve RAM buffer [mem 0x7e61b000-0x7fffffff]
[    0.206421] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[    0.206610] Bluetooth: Core ver 2.21
[    0.206625] NET: Registered protocol family 31
[    0.206628] Bluetooth: HCI device and connection manager initialized
[    0.206633] Bluetooth: HCI socket layer initialized
[    0.206636] Bluetooth: L2CAP socket layer initialized
[    0.206644] Bluetooth: SCO socket layer initialized
[    0.206821] clocksource: Switched to clocksource refined-jiffies
[    0.206931] FS-Cache: Loaded
[    0.207005] pnp: PnP ACPI init
[    0.207367] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.207372] system 00:00: [mem 0x7f800000-0x7fffffff] could not be reserved
[    0.207378] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.207483] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.207488] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.207491] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.207495] system 00:01: [mem 0xfed00000-0xfedfffff] could not be reserved
[    0.207499] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
[    0.207503] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.207507] system 00:01: [mem 0xffa00000-0xffffffff] has been reserved
[    0.207510] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.207515] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207564] pnp 00:02: Plug and Play ACPI device,"IDs PNP0b00 (active)
[    0.207643] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.207715] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.208046] system 00:05: [io  0x0a00-0x0a1f] has been reserved
[    0.208050] system 00:05: [io  0x0a20-0x0a2f] has been reserved
[    0.208054] system 00:05: [io  0x0a30-0x0a3f] has been reserved
[    0.208058] system 00:05: [io  0x0a40-0x0a4f] has been reserved
[    0.208061] system 00:05: [io  0x0a50-0x�a5f] has been reserved
[    0.208066] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208196] pnp: PnP ACPI: found 6 devices
[    8.215669] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.215697] clocksource: Switched to clocksource acpi_pm
[    0.215720] pci 0000:00:01.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.215726] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.215731] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.215742] pck 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.215752] pci 0000:00:03.0: bridge window [io  0x1000-0x0ffg] to [bus 03](add_size 1000
[    0.215757] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.215767] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.215780] pci 0000:00:01.0: res[8]=[mem 0x00100000-0x000fffff] res_vo_dev_res add_size 200000 min_align 100000
[    0.215784] pci 0000:00:01.0: res[8]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.215788] pci 0000:00:01.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215792] pci 0000:00:01.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215796] pci 0000:00:02.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_devres add_size 200000 min_align 100000
[    0.215800] pci 0000:00:02.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215804] pci 0000:00:03.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215808] pci 0000:00:03.0: res[9]=[mem 0x00100000-4x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215811] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215815] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215819] pci 0000:00:01.0: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.215823] pci 0000:00:01.0: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.215826] pci 0000:00:03.0: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.215830] pci 0000:00:03.0: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.215838]0pci 0000:00:01.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.215844] pci 0000:00:01.0: BAR 9: assigned [mem 0x180000000-0x1801fffff 64bit pref]
[ 0  0.215850] pci 0000:00:02.0: BAR 9: assigned [mem 0x180200000-0x1803fffff 64bit pref]
[    0.215856] pci 0000:00:03.0: BAR 9: assigned [mem 0x180400000-0x1805fffff 64bit pref]
[    p.215862] pci 0000:00:04.0: BAR 9: assigned [mem 0x180600000-0x1807fffff 64bit pref]
[    0.215867] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.215872] pci 0000:00:03.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.215877] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.215881] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.215888] pci 0000:00:01.0:   bridge window _mem 0x80000000-0x801fffff]
[    0.215894] pci 0000:00:01.0:   bridge window [mem 0x180000000-0x1801fffff 64bit pref]
[    0.215903] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.215907] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.215913] pci 0000:00:02.0:   bridge window [mgm 0xdfd00000-0xdfdfffff]
[    0.215919] pci 0000:00:02.0:   bridge window [mem 0x180200000-0x1803fffff 64bit pref]
[    0.215927] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.215931] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.215937] pci 0000:00:03.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.215943] pci 0000:00:03.0:   bridge window [mem 0x180400000-0x1805fffff 64bit pref]
[    0.215952] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.215955] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.215961] pci 0000:00:04.0:   bridge window [mem 0xdfb00000-0xdfbfffff]
[    0.215967] pci 0000:00:04.0:   bridge window [mem 0x180600000-0x1807fffff 64bit pref]
[    0.215978] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.215981] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.215985] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.215988] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.215991] pci_bus 0000:00: resource 8 [mem 0x180000000-0xfffffffgf window]
[    0.215995] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.215998] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.216001] pci_bus 0000:01: resource 2 [mem 0x180000000-0x1801fffff 64bit pref]
[    0.216004] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.216008] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[   !0.216011] pci_bus 0000:02: resource 2 [mem 0x180200000-0x1803fffff 64bit pref]
[    0.216014] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.216017] pci_bus"0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.216021] pci_bus 0000:03: resource 2 [mem 0x180400000-0x1805fffff 64bit pref]
[    0.216024] pci_bus 00p0:04: resource 0 [io  0xc000-0xcfff]
[    0.216027] pci_bus 0000:04: resource 1 [mem 0xdfb00000-0xdfbfffff]
[    0.216031] pci_bus 0000:04: resource 2 [mem 0x180�00000-0x1807fffff 64bit pref]
[    0.216072]�NET: Registered protocol family 2
[    0.216278] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.216360] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.216532] TCP: Hash tables configured (established 32768 bind 32768)
[    0.216601] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.216629] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.216754] NET: Registered protocol family 1
[    0.216892] RPC: Registered named UNIX socket transport module.
[$   0.216895] RPC: Registered udp transport module.
[    0.216897] RPC[    0.216898] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.228011] PCI: CLS 64 bytes, default 64
[    0.228103] Unpacking initramfs...
[    1.098594] Freeing initrd memory: 4212K
[    1.098610] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.098614] software IO TLB [mem 0x794dd000-0x7d4dd000] (64MB) mapped at [ffff8800794dd000-ffff88007d4dcfff]
[    1.106023] VFS: Disk quotas dquot_6.6.0
[    1.106100] VFS: Dquot-cache hash table entries: 512 (order 0, 4496 bytes)
[    1.114088] NFS: Registering the id_resolver key type
[    1.114109] Key type id_resolver registered
[    q.114112] Key type id_legacy registered
[    1.114119] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.136105] Key type cifs.spnego registered
[    1.136118] Key type cifs.idmap registered
[    1.136212] fuse init (API version 7.23)
[    1.141029] NET: Registered protocol family 38
[    1.141042] async_tx: api initialized (async)
[    1.141141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.141221] io scheduler noop registered
[    1.141226] io scheduler deadline registered
[    1.141284] io scheduler cfq registered (default)
[    1.141384] io scheduler bfq registered
[    1.141387] BFQ I/O-scheduler: v7r11
[    1.141942] gpio_it87: Found Chip IT8732 rev �. 64 GPIO lines starting at 0a10h
[    1.142603] pcieport 0000:00:04.0: can't derive routing for PCI INT A
[  " 1.142607] pcieport 0000:00:04.0: PCI INT A: no GSI
[    1.142727] intel_idle: MWAIT substates: 0x3000020
[    1.142731] intel_idle: v0.4.1 model 0x4D
[    1.142733] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.142966] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.142972] ACPI: Power Button [PWRF]
[    1.146486] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    1.146728] Serial: 8250/16550 driver, 4 ports, IRQ sharing eoabled
[    1.167110] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.187526] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.188014] Linux agpgart interface v0.103
[    1.188072] [drm] Initialized drm 1.1.0 20060810
[    1.190511] loop: module loaded
[    1.190920] gpio_ich: GPIO from 388 to 447 on gpio_ich
[    1.191073] mpt3sas version 12.100.00.00 loaded
[    1.206988] ahci 0000:00:17.0: version 3.0
[    1.217783] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.217790] ahci 0000:00:17.0: flags: 64bit ncq led clo pio deso sadm sds apst 
[    1.217837]`do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.217875] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.217910] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.217945] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.219576] scsi�host0: ahci
[    1.222755] scsi host1: ahci
[    1.222973] scsi host2: ahci
[    1.223158] scsi host3: ahci
[    1.223234] ata1: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36100 irq 88
[    1.223238] ata2: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36180 irq 88
[    1.223241] ata3: S�TA max UDMA/133 abar m2048@0xdff36000 port 0xdff36200 irq 88
[    1.223244] ata4: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36280 irq 88
[    1.233754] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.233761] ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sadm sds apst 
[    1.233805] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.233837] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.234207] scsi host4: ahci
[    1.234362] scsi host5: ahci
[    1.234439] ata5: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 89
[    1.234443] ata6: SATQ max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 89
[    1.234656] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.234662] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.234718] ReadyNAS model: ReadyNAS 3138
[    1.234722] do_marvell_9170_recover: start_engine() called for PCI#2 port 0
[    1.234724] do_marvell_9170_recover: saving PCI#2 and �EV
[    1.234728] marvell_9170_save_pci_dev: pci[4]=100407
[    1.234731] marvell_9170_save_pci_dev: pci[c]=10
[    1.234734] marvell_9170_save_pci_dev: pci[10]=d041
[    1.234737] marvell_9170_save_pci_dev: pci[14]=d031
[    1.234740] marvell_9170_save_pci_dev: pci[18]=d021
[    1.234744] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.234747] marvell_9170_save_pci_dev[[0m� pci[20]=d001
[    1.234750] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.234753] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.234756] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.234759] marvell_9170_save_pci_dev: pci[44]=0
[    1.234762] marvell_9170_save_pci_dev: pci[50]=17005
[    q.234765] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.234768] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.234771] marvell_9170_save_pci_dev: pci[78]=92027
[    1.234774] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.234777] marvell_9170_save_pci_dev: pci[a0]=2
[    1.234779] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.234782] marvell_9170_save_pci_dev: dev[100]=7a840000
[    1.234785] marvell_9170_save_pci_dev: dev[104]=1
[    1.234787] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.234790] marvell_9170_save_pci_dev: dev[10c]=1
[    1.234792] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.234794] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.234796] marvell_9170_save_pci_dev: dev[118]=710011
[    1.234799] marvell_9170_save_pci_dev: dev[180]=98500
[    1.234801] marvell_9170_save_pci_dev: dev[184]=0
[    1.234804] marvell_9170_save_pci_dev: dev[188]=98540
[    1.234807] marvell_9170_save_pci_dev: dev[18c]=0
[    1.234809] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.234811] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.234813] marvell_9170_save_pci_dev: dev[198]=710011
[    1.234855] do_marvell_9170_recover: start_engine() called for PCI#2 port 1
[    1.234857] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.234860] marvell_9170_save_pci_dev: pci[4]=100407
[    1.234863] marvell_917�_save_pci_dev: pci[c]=10
[    1.234866] marvell_9170_save_pci_dev: pci[10]=d041
[    1.234869] marvell_9170_save_pci_dev: pci[14]=d031
[    1.234872] marvell_9170_save_pci_dev: pci[18]=d021
[    1.2�4875] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.234878] marvell_9170_save_pci_dev: pci[20]=d001
[    1.234881] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.234884] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.234887] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.234890] marvell_9170_save_pci_dev: pci[44]=0
[    1.234893] marvell_9170_save_pci_dev: pci[50]=17005
[    1.234896] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.234899] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.234903] marvell_9170_save_pci_dev: pci[78]=92027
[    1.234906] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.234909] marvell_9170_save_pci_dev: pci[a0]=2
[    1.234911] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.234913] marvell_9170_save_pci_dev: dev[100]=7a840000
[    1.234916] marvell_9170_save_pci_dev: dev[104]=1
[    1.234919] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.234921] marvell_9370_save_pci_dev: dev[10c]=1
[    1.234923] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.234925] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.234927] 33mmarvell_9170_save_pci_dev: dev[118]=710011
[    1.234930] marvell_9170_save_pci_dev: dev[180]=7a920000
[    1.234933] marvell_9170_save_pci_dev: dev[184]=1
[    1.234935] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.234938] marvell_9170_save_pci_dev: dev[18c]=1
[    1.234940] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.234942] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.234944] marvell_9170_save_pci_dev: dev[198]=710011
[    1.236459] scsi host6: ahci
[    1.237611] scsi host7: ahci
[    1.237736] ata7: SATA max UDMA/133 abar m512@0xdfd10000 port 0xdfd10100 irq 90
[    1.237741] ata8: SATA max UDMA/133 abar m512@0xdfd10000 port 0xdfd10180 irq 90
[    1.237793] do_marvell_9170_recover: still booting
[    1.237976] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.237983] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.238034] do_marvell_9170_recover: start_engine() called for PCI#4 port 0
[    1.238036] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.238040] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238043] marvell_9170_save_pci_dev: pci[c]=10
[    1.238046] marvell_9170_save_pci_dev: pci[10]=d041
[    1.238049] marvell_9170_save_pci_dev: pci[14]=d031
[    1.238052] marvell_9170_save_pci_dev: pci[18]=d021
[    1.238055] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.238058] marveml_9170_save_pci_dev: pci[20]=d001
[    1.238061] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.238064] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.238067] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.238070] marvell_9170_save_pci_dev: pci[44]=0
[    1.238073] marvell_9170_save_pci_dev: pci[50]=17005
32m_    1.238076] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238079] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.238082] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238085] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238088] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238090] marveml_9170_save_pci_dev: dev[4]=80000002
[    1.238093] marvell_9170_save_pci_dev: dev[100]=7a840000
[    1.238096] marvell_9170_save_pci_dev: dev[104]=1
[    1.238099] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.238101] marvell_9170_save_pci_dev: dev[10c]=1
[    1.238103] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238105] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238107] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238110] marvell_917p_save_pci_dev: dev[180]=7a920000
[    1.238113} marvell_9170_save_pci_dev: dev[184]=1
[    1.238116] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.238118] marvell_9170_save_pci_dev: dev[18c]=1
[    1.238120] marvell_9170_sa�e_pci_dev: dev[190]=ffffffff
[    1.238122] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.238124] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238126] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.238129] marvell_9�70_save_pci_dev: pci[4]=100407
[    1.238132] marvell_9170_save_pci_dev: pci[c]=10
[    1.238135] marvell_9170_save_pci_dev: pci[10]=c041
[    1.238138] marvell_9170_save_pci_dev: pci[14]=c031
[    1.238141] marvell_9170_save_pci_dev: pci[18]=c021
[    1.238144] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.238147] marvell_9170_save_pci_dev: pci[20]=c001
[    1.238150] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.238153] marvell_9170_save_pci_duv: pci[30]=dfb00000
[    1.238156] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.238159] marvell_9170_save_pci_dev: pci[44]=0
[    1.238162] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238165] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238168] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.238171] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238174] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238177] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238179] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.238182] marvell_9170_save_pci_dev: dev[100]=7aae0000
[    1.238185] marvell_9170_save_pci_dev: dev[104]=1
[    1.238188] marvell_9170_save_pci_dev: dev[108]=7aae0400
[    1.238190] marvell_9170_save_pci_dev: dev[10c]=1
[    1.238192] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238194] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238196] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238199] marvell_9170_save_pci_dev: dev[180]=98500
[    1.238202] marvell_9170_save_pci_dev: dev[184]=0
[    1.238204] marvell_9170_save_pci_dev: dev[188]=98u40
[    1.238207] marvell_9170_save_pci_dev: dev[18c]=0
[    1.238209] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238211] marvell_=170_save_pci_dev: dev[194]=7840007f
[    1.238213] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238251] do_marvell_9170_recover: start_engine() called for PCI#4 port 1
[    1.238253] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.238256] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238259] marvell_9170_save_pci_dev: pci[c]=10
[    1.238262] marvell_9170_save_pci_dev: pci[10]=d041
[    1.238265] marvell_9170_save_pci_dev: pci[14]=d031
[    1.238268] marvell_9170_save_pci_dev: pci[18]=d021
[    1.238271] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.238274] marvell_9170_save_pci_dev: pci[20]=d001
[    1.238277] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.238280] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.238283] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.238286] marvell_9170_save_pci_dev: pci[44]=0
[    1.238289] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238292] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238295] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.238298] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238302] marvell_;170_save_pci_dev: pci[80]=10120040
[    1.238304] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238306] marvell_9170_save_pci_dev: dev[4]=80000002
*[    1.238312] marvell_9170_save_pci_dev: dev[104]=1840000
[    1.238315] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.238317] marvell_9170_save_pci_dev: dev[10c]=1
[    1.238319] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238321] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238323] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238326] marvell_9170_save_pci_dev: dev[180]=7a920000
[    1.238329] marvell_9170_save_pci_dev: dev[184]�1
[    1.238331] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.238334] marvell_9170_save_pci_dev: dev[18c]=1
[    1.238336] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238338] marve�l_9170_save_pci_dev: dev[194]=7840007f
[    1.238340] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238342] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.238345] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238348] marvell_9170_save_pci_dev: pci[c]=10
[    1.238351] marvell_9170_save_pci_dev: pci[10]=c041
[    1.238354] marvell_9170_save_pci_dev: pci[14]=c031
[    1.238357] marvell_9170_save_pci_dev:0pci[18]=c021
[    1.238360] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.238363] marvell_9170_save_pci_devci[20]=c001
[    1.238366] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.238369] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.238372] marvell_9170_{ave_pci_dev: pci[3c]=1ff
[    1.238375] marvell_9170_save_pci_dev: pci[44]=0
[    1.238378] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238381] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238384] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.238387] marvell_9170_save_pci_dev: pci[78]=92027
[0   1.238390] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238393] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238395] marvell_9170_save_pci_dev: dev[4]=80000�02
[    1.238398] marvell_9170_save_pci_dev: dev[100]=7aae0000
[    1.238401] marvell_9170_save_pci_dev: dev[104]=1
[    1.238403] marvell_9170_save_pci_dev: dev[108]=7aae0400
[    1.238406] marvell_9170_save_pci_dev: dev[10c]=1
[    1.238408] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238410] [[33mmarvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238412] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238415] marvell_9170_save_pci_dev: dev[180]=7a940000
[    1.238417] marvell_9170_save_pci_dev: dev[184]=1
[    1.238420] mqrvell_9170_save_pci_dev: dev[188]=7a940400
[    1.238423] marvell_9170_save_pci_dev: dev[18c]=1
[    1.238425] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238427] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.238429] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238804] do_marvell_9170_recover: still booting
[    1.243432] scsi host8: ahci
[    1.244769] scsi host9: ahci
[    1.244867] ata9: SATA max UDMA/133 abar m512@0xdfb10000 port 0xdfb10100 irq 91
[    1.244872] ata10: SATA max UDMA/133 abar m512@0xdfb10000 port 0�dfb10180 irq 91
[    1.246327] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    1.247746] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2031)
[    1.247774] tun: Universal TUN/TAP device driver, 1.6
[    1.247776] tun: (C) 1999-2004 Max Krasnyansky 
[    1.247909] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.247912] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.247957] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.247959] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.247990] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    1.247992] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.529749] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.529763] ata3: SATA link down (SStatus 0 SControl 300)
[    1.529781] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.529790] ata4: SATI link down((SStatus 0 SControl 300)
[    1.529805] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.529817] ata2: SATA link down (SStatus 0 SControl 300)
[`   1.529833] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#2
[    1.529842] ata1: SATA link down (SStatus 0 SControl 300)
[    1.541728] mmdo_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.541739] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.542723] do_marvell_9170_recover: start_engine() called for PCI#2 port 0
[    1.542726] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.542731] marvell_9170_save_pci_dev: pci[4]=10�407
_    1.542734] marvell_9170_save_pci_dev: pci[c]=10
[    1.542737] marvell_9170_save_pci_dev: pci[10]=d041
[    1.542740] marvell_9170_save_pci_dev: pci[14]=d031
[    1.542744] marvell_9170_save_pci_dev: pci[18]=d021
[    1.542747] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.542750] marvell_9170_save_pci_dev: pci[20]=d001
[    1.542753] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.542756] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    q.54�759] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.542762] marvell_9170_save_pci_dev: pci[44]=0
[    1.542765] marvell_9170_save_pci_dev: pci[50]=17005
[    1.542768] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.542771] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.542774] marvell_9170_save_pci_dev:!pci[78]=92027
[    1.542777] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.542781] marvell_9170_save_pci_dev: pci[a0]=2
[    1.542783] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.542785] marvell_9170_save_pci_dev: dev[100]=7a840000
[    1.542788] marvell_9170_save_pci_dev: dev[104]=1
[    1.542791] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.542794] marvell_9170_save_pci_dev: dev[10c]=1
[    1.542796] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.542797] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.542799] marvell_9170_save_pci_dev: dev[118]=710011
[    1.542802] marvell_9170_save_pci_dev: dev[180]=7a920000
[    1.542805] marvell_9170_save_pci_dev: dev[184]=1
[    1.542808] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.542810] marvell_9170_save_pci_dev: dev[18c]=1
[    1.542812] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.542814] marvell_9170_save_pci_dev: dev[194]=7842007fM
                                                            [    1.542816] marvell_9170_save_pci_dev: dev[198]=710011
[    1.542818] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.542821] marvell_9170_save_pci_dev: pci[4]=100407
[    1.542824] marvell_9170_save_pci_dev: pci[c]=10
[    1.542827] marvell_9170_save_pci_dev: pci[10]=c041
[    1.542830] marvell_9170_save_pci_dev: pci[14]=c031
[    1.542833] marvell_9170_save_pci_dev: pci[18]=c021
[    1.542836] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.542840] marvell_9170_save_pci_dev: pci[20]=c001
[    1.542843] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.542846] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.542849] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.542852] marvell_9170_save_pci_dev: pci[44]=0
[    1.542855] marvell_9170_save_pci_dev: pci[50]=17005
[    1.542858] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.542861] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.542864] marvell_9370_save_pci_dev: pci[78]=92027
[    1.542867] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.542870] marvell_9170_save_pci_dev: pci[a0]=2
[    1.542872] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.542875] marvell_9170_save_pci_dev: dev[100]=7aae0000
[    1.542877] marvell_9170_save_pci_dev: dev[104]=1
[    1.542880] marvell_9170_save_pci_dev: dev[108]=7aae0400
[    1.542883] marvell_9170_save_pci_dev: dev[10c]=1
[    1.542885] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.542887] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.542889] marvell_9170_save_pci_dev: dev[118]=710011
[    1.542892] marvell_9170_save_pci_dev: dev[180]=7a940000
[    1.542894] marvell_9170_save_pci_dev: dev[184]=1
[    1.542897] marvell_9170_save_pci_dev: dev[188]=7a940t00
[    1.542900] marvell_9170_savepci_dev: dev[18c]=1
[    1.542902] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.542904] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.542906] marvell_9170_save_pci_dev: dev[198]=710011
[    1.542916] ata7: SATA link down (SStatus 0 SControl 300)
[    1.542932]"ata5.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    1.542936] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.543745] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.543755] do_marvell_9170_recover: start_engine() called for PCI#2 port 1
[    1.543756] ata6: SATA link down (SStatus 0 SControl 300)
[    1.543760] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.543764] marvell_9170_save_pci_dev: pci[4]=100407
[    1.543768] marvell_9170_save_pci_dev: pci[c]=10
[    1.543771] marvell_9170_save_pci_dev: pci[10]=d041
[    1.543774] marvell_9170_save_pci_dev: pci[14]=d031
[    1.543777] marvell_9170_save_pci_dev: pci[18]=d021
[    1.543780] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.543783] marvell_9170_save_pci_dev: pci[20]=d001
[    1.543786] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.543789] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.543792] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.543795] marvell_9170_save_pci_dev: pci[44]=0
[    1.543798] marvell_9170_save_pci_dev: pci[50]=17005
[    1.543801] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.543804] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.543807] marvell_9170_save_pci_dev: pci[78]=92027
[    5.543810] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.543813] marvell_9170_save_pci_dev: pci[a0]=2
[    1.543815] marvell_9170_save_pck_dev: dev[4]=80000002
[    1.543818] marvell_9170_save_pci_dev: dev[100]=7a840000
[    1.543821] marvell_9170_save_pci_dev: dev[104]=1
[    1.543824] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.543826] marvell_9170_save_pci_dev: dev[10c]=1
[    1.543828] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.543830] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.543832] marvell_9170_save_pci_dev: dev[118]=710011
[    1.543835] marvell_9170_save_pci_dev: dev[180]=7a920000
[    1.543838] marvell_9170_save_pci_dev: dev[184]=1
[    1.543840] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.543843] marvell_9170_save_pci_dev: dev[18c]=1
[    1.543845] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.543847] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.543849] marvell_9170_save_pci_dev: dev[198]=710011
[    1.543851] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.543854] marvell_9170_save_pci_dev: pci[4]=100407
[    1.543857] marvell_9170_save_pci_dev: pci[c]=10
[    1.543860] marvell_9170_save_pci_dev: pci[10]=c041
[    1.543863] marvell_9170_save_pci_dev: pci[14]=c031
[    1.543866] marvell_9170_save_pci_dev: pci[18]=c021
[    1.543869] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.543872] marvell_9170_save_pci_dev: pci[20]=c001
[    1.543875] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.543878] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.543881] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.543884] marvell_9170_save_pci_dev: pci[44]=0
[    1.543887] marvell_9170_save_pci_dev: pci[50]=17005
[    1.543890] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.543893] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.543896] marvell_9170_save_pci_dev: pci[78]=92027
[    1.543899] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.543902] marvell_9170_save_pci_dev: pci[a0]=2
[    1.543904] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.543907] marvell_9170_save_pci_dev: dev[100]=7aae0000
[    1.543910] marvell_9170_save_pci_dev: dev[104]=1
[ 0  1.543912] marvell_9170_save_pci_dev: dev[108]=7aae0400
[    1.543915] marvell_9170_save_pci_dev: dev[10c]=1
[    1.543919] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.543921] marvell_9170_save_pci_dev: dev[118]=710011
[    1.543924] marvell_9170_save_pci_dev: dev[180]=7a940000
[    1.543926] marvell_9170_save_pci_dev: dev[184]=1
[    1.543929] marvell_9170_save_pci_dev: dev[188]=7a940400
[    1.543932] marvell_9170_save_pci_dev: dev[18c]=1
[    1.543934] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.543936] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.543938] marvell_9170_save_pci_dev: dev[198]=710011
[    1.543948] ata8: SATA link down (SStatus 0 SControl 300)
[    1.544381] ata5.00: configured for UDMA/133
[    1.544737] scsi 4:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[    1.545102] sd 4:0:0:0: [sda] 976773168 5�2-byte logical blocks: (500 GB/466 GiB)
[    1.545108] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.545123] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    1.545201] sd 4:0:0:0: [sda] Write Protect is off
[    1.545206] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.545247] sd 4:0:0:0: [sda] Write cache: encbled, read cache: enabled, doesn't support DPO or FUA
[    1.549797] do_marvell_9170_recover: start_engine() called for PCI#4 port 1
[    1.549802] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.549807] marvell_9170_save_pci_dev: pci[4]=100407
[  $ 1.549810] marvell_9170_save_pci_dev: pci[c]=10
[    1.549813] marvell_9170_save_pci_dev: pci[10]=d041
[    1.549816] marvell_9170_save_pci_dev: pci[14]=d031
[    1.549819] marvell_9170_save_pci_dev: pci[18]=d021
[(   1.549822] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.549825] marvell_9170_save_pci_dev: pci[20]=d001
[    1.549828] marvell_9170_save_pci_dev: pci[24]=dfd10000
                                                          [    1.549832] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.549835] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.549838] marvell_9170_save_pci_dev: pci[44]=0
[    1.549841] marvell_9170_save_pci_dev: pci[50]=17005
[    1.549844] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.549847] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.549850] marvell_9170_save_pci_dev: pci[78]=92027
[    1.549853] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.549856] marvell_9170_save_pci_dev: pci[a0]=2
[    1.549858] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.549861] marvell_9170_save_pci_dev: dev[100]=7q840000
[    1.549864] marvell_9170_save_pci_dev: dev[104]=1
[    1.549866] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.549869] marvell_9170_save_pci_dev: dev[10c]=1
[    1.549871] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.549873] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.549875] marvell_9170_save_pci_dev: dev[118]=710011
[    1.549878] marvell_9170_save_pci_dev: dev[180]=7a920000
[    1.549881] marvell_9170_save_pci_dev: dev[184]=1
[    1.549883] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.549886] marvell_9170_save_pci_dev: dev[18c]=1
[    1.549888] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.549890] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.549892] marvell_9170_save_pci_dev: dev[198]=710011
[    1.549893] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.549897] marvell_9170_save_pci_dev: pci[4]=100407
[    1.549900] marvell_9170_save_pci_dev: pci[c]=10
[    1.549903] marvell_9170_save_pci_dev: pci[10]=c041
[    1.549906] marvell_9170_save_pci_dev: pci[14]=c031
[    1.549909] marvell_9170_save_pci_dev: pci[18]=c021
[    1.549912] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.549915] marvell_9170_save_pci_dev: pci[20]=c001
[    1.549918] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.549921] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.549924] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.549927] marvelm_9170_save_pci_dev: pci[44]=0
[    1.549930] marvell_9170_save_pci_dev: pci[50]=17005
[    1.549933] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.549936] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.549939] marvell_9170_save_pci_dev: pci[78]=92027
[    1.549942] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.549945] marvell_9170_save_pci_dev: pci[a0]=2
[    1.549947] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.549950] marvell_9170_save_pci_dev: dev[100]=7aae0000
[    1.549953] marvell_9170_save_pci_dev: dev[104]=1
[    1.549955] marvell_9170_save_pci_dev: dev[108]=7aae0400
[    1.549958] marvell_9170_save_pci_dev: dev[10c]=1
[    1.549960] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.549962] marvell_9170_save_pci_dev: dev[514]=7840007f
[    1.549964] marvell_9170_save_pci_dev: dev[118]=710011
[    1.549967] marvell_9170_save_pci_dev: dev[180]=7a940000
[    1.549969] marvell_9170_save_pci_dev: dev[184]=1
[    1.549972] marvell_9170_save_pci_dev: dev[188]=7a940400
[    1.549975] marvell_9170_save_pci_dev: dev[18c]=1
[    1.549977] marvelm_9170_save_pci_dev: dev[190]=ffffffff
[    1.549979] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.549981] marvell_9170_save_pci_dev: dev[198]=710011
[    1.549992] ata10: SATA link down (SStatus 0 SControl 300)
[    1.550751] do_marvell_9170_recover: start_engine() called for PCI#4 port 0
[    1.550756] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.550761] marvell_9170_save_pci_dev: pci[4]=100407
[    1.550765] marvell_9170_save_pci_dev: pci[c]=10
[    1.550768] marvell_9170_save_pci_dev: pci[10]=d041
[    1.550771] marvell_9170_save_pci_dev: pci[14]=d031
[    1.550774] marvell_9170_save_pci_dev: pci[18]=d021
[    1.550778] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.550781] marvell_9170_save_pci_dev: pci[20]=d001
[    1.550784] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.550787] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.550790] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.550793] marvell_9170_save_pci_dev: pci[44]=0
[    1.550796] marvell_9170_save_pci_dev: pci[50]=17005
[    1.550799] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.550802] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.550805] marvell_9170_save_pci_dev: pci[78]=92027
[    1.550808] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.550811] marvell_9170_save_pci_dev: pci[a0]=2
[    1.550813] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.550816] marvell_9170_save_pci_dev: dev[100]=7a840000
[    1.550819] marvell_9170_save_pci_dev: dev[104]=1
[    1.550822] marvell_9170_save_pci_dev: dev[108]=7a840400
[    1.550824] marvell_9170_save_pci_dev: dev[10c]=1
[    1.550826] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.550828] marvell_9170_save_pci_dev: dev[11�]=7840007f
[    1.550830] marvell_9170_save_pci_dev: dev[118]=710011
[    1.550833] marvell_9170_save_pci_dev: dev[180]=7a920000
[    1.550836] marvell_9170_save_pci_dev: dev[184]=1
[    1.550839] marvell_9170_save_pci_dev: dev[188]=7a920400
[    1.550841] marvell_9170_save_pci_dev: dev[18c]=1
[    1.550843] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.550845] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.550847] marvell_9170_save_pci_dev: dev[198]=710011
[    1.550849] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.550852] marvell_9170_save_pci_dev: pci[4]=100407
[    1.550855] marvell_9170_save_pci_dev:"pci[c]=10
[    1.550858] marvell_9170_save_pci_dev: pci[10]=c041
[    1.550861] marvell_9170_save_pci_dev: pci[14]=c031
[    1.550864] marvell_9170_save_pci_dev: pci[18]=c021
[    1.550867] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.550870] marvell_9170_save_pci_dev: pci[20]=c001
[    1.550873] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.550876] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.550879] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.550882] marvell_9170_save_pci_dev: pci[44]=0
[    1.550885] marvell_9170_save_pci_dev: pci[50]=17005
[    1.550888] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.550891] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.550894] marvell_9170_save_pci_dev: pci[78]=92027
[    1.550898] marvell9170_save_pci_dev: pci[80]=10120040
[    1.550901] marvell_9170_save_pci_dev: pci[a0]=2
[    1.550902] marvell_9170_save_pci_dev: dev[4]=80000002
[    �.550905] marvell_9170_save_pci_dev: dev[100]=7aae0000
[    1.550908] marvell_9170_save_pci_dev: dev[104]=1
[    1.550911] marvell_9170_save_pci_dev: dev[108]=7aae0400
[    1.550913] marvell_9170_save_pci_dev: dev[10c]=1
[    1.550915] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.550917] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.550919] marvell_9170_save_pci_dev: dev[118]=710011
[    1.550922] marvell_9170_save_pci_dev: dev[180]=7a940000
[    1.550925] marvell_9170_save_pci_dev: dev[184]=1
[    1.550927] marvell_9170_save_pci_dev: dev[188]=7a940400
[    1.550930] marvell_9170_save_pci_dev: dev[18c]=1
[    1�550932] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.550934] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.550936] marvell_9170_save_pci_dev: dev[198]=710011
[    1.550948] ata9: SATA link down (SStatus 0 SControl 300)
[    1.589555]  sda: sda1 sda2 sda3
[    1.589607] igb 0000:0p:14.0: added PHC on eth0
[    1.589612] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
[    1.589692] igb 0000:00:14.0: eth0: PBA No: 002100-000
[    1.589696] igb 0000:00:14.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    1.590273] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.932648] igb 0000:00:14.1: added PHC on eth1
[    1.932654] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
[    1.932731] igb 0000:00:14.1: eth1: PBA No: 002102-000
[    1.932734] igb 0000:00:14.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.100725] tsc: Refined TSC clocksource calibration: 2400.000 MHz
[    3.100732] clocksource: tsc� mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    2.275588] igb 0000:00:14.2: added PHC on eth2
[    2.275593] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection
[    2.275669] igb 0000:00:14.2: eth2: PBA No: 002100-000
[    2.275672] igb 0000:00:14.2: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.618593] igb 0000:00:14.3: added PHC on eth3
[    2.618599] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection
[    2.618690] igb 0000:00:14.3: eth3: PBA No: 002100-000
[    2.618694] igb 0000:00:14.3: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.619564] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.3.3
[    2.619568] Copyright(c) 1999 - 2017 Intel Corporation.
[    2.621176] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.3.6
[    2.621181] i40e: Copyright(c) 2013 - 2017 Intel Corporation.
[    2.622058] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[    2.624263] Fusion MPT base driver 3.04.20
[    2.624268] Copyright (c) 1999-2008 LSI Corporation
[    2.624278] Fuskon MPT SAS Host driver 3.04.20
[    2.624310] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.624383] mptctl: Registered with Fusion MPT base driver
[    2.624386] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.624392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.624401] ehci-pci: EHCI PCI platform driver
[    2.624557] ehci-pci 0000:00:16.0: EHCI Host Controller
[    2.624568] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1
[    2.624585] ehci-pci 0000:00:16.0: debug port 2
[    2.628490] ehci-pci 0000:00:16.0: cache line size of 64 is not supported
[    2.628513] ehci-pci p000:00:16.0: irq 23, io mem 0xdff37000
[    2.633763] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00
[    2.634221] hub 1-0:1.0: USB hub found
[    2.634256] hub 1-0:1.0: 8 ports detected
[ "  2.634602] uhci_hcd: USB Universal Host Controller Interface driver
[    2.634770] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.634781] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.695309] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000410
[    2.695853] hub 2-0:1.0: USB hub found
[    2.695893] hub 2-0:1.0: 2 ports detected
[    2.696061] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.696068] xhci_hcd 0200:03:00.0: new USB bus registered, assigned bus�number 3
[    2.696142] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.696487] hub 3-0:1.0: USB hub found
[    2.696508] hub 3-0:1.0: 2 ports detected
[    2.696740] usbcore: registered new interface driver cdc_acm
[    2.696743] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.696768] usbcore: registered new interface driver usblp
[    2.696808] usbcore: reg�stered new interface driver usb-storage
[    2.696863] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.935717] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.964450] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.964721] rtc_cmos 00:02: RTC can wake from S4
[    2.968415] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.968452] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[    2.968480] i2c /dev entries driver
[    2.968664] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.977782] input: AT Translated Set 2 keyboard as /devices/platform/i8242/serio0/input/input1
[    3.050407] hub 1-1:1.0: USB hub found
[    3.050579] hub 1-1:1.0: 4 ports detected
[    3.100931] clocksource: Switched to clocksource tsc
[    3.323710] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    3.410901] usb-storage 1-1.2:1.0: USB Mass Storage device detected-
                                                                       [    3.411798] scsi host10: usb-storage 1-1.2:1.0
[    3.981708] ismt_smbus 0000:00:13.0: completion wait timed out
[    4.987706] ismt_smbus 0000:0p:13.0: completion wait timed out
[    5.993688] ismt_smbus 0000:00:13.0: completion wait timed out
[    6.999691] ismt_smbus 0000:00:13.0: completion wait timed out
[    7.006487] it87: Found IT8732F chip at 0xa30, revision 2
[    7.006533] it87: Configuring VIN3 for external sensor
[    7.006668]"it87 it87.2608: Reconfiguring PWM to active high polarity
[    7.007331] md: raid0 personality registered for level 0
[    7.007336] mdz raid1 personality registered for level 1
[    7.007340] md: raid10 personality registered for level 10
[    7.008751] md: raid6 personality registered for level 6
[    7.008756] md: raid5 personality registered for level 5
[    7.008758] md: raid4 personality registered for level 4
[    7.008955] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    7.010230] usbcore: registered new interface driver btusb
[    7.010323] usbcore: registered new interfacg dryver usbhid
[    7.010326] usbhid: USB HID core driver
[    7.010506] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.010822] NET: Registered protocol fammly 10
[    7.012426] NET: Registered protocol family 17
[    7.012454] 8021q: 802.1Q VLAN Support v1.8
[    7.012483] Key type dns_resolver registered
[    7.012752] readynas_io_init: initializing ReadyNAS I/O.
[    7.012756] procfs_init: initializing ReadyNAS procfs.
[    7.012776] pwr_button_state_iniu: initializing ReadyNAS PWR button state hendler for rn313x.
[    7.012800] button_init: initializing ReadyNAS button set.
[    7.012804] __button_init: button 'uid7 gpio_it87:55 (POLL)
[    7.012873] __button_init: button 'reset' gpio_it87:21n (IRQ)
[    7.013013] rn_button 'reset' IRQ#45
[    7.015061] input: rn_button as /devices/virtual/input/input2
[    7.015150] readynas_io_init: initialization successfully completed.
[    7.015258] readynas_lcd_init: installing ReadyNAS LCD driver.
[    7.015366] readynas_led_init: installing ReadyNAS LED driver.
[    7.017734] register_led: registering LED "readynas:green:pwr"
[    7.017874] register_led: registering LED "readynas:red:err"
[    7.017974] register_led: registering LED "readynas:blue:uid"
[    7.018133] register_led: registering LED ".readynas::sata1_pwr"
[    7.018168] register_led: registering LED ".readynas::sata2_pwr"
[    7.018201] register_led: registering LED ".readynas::sata3_pwr"
[    7.018237] register_led: registering LED ".readynas::sata4_pwr"
[    7.018272] register_led: registering LED "readynas:green:sata1"
[    7.018303] register_led: registering LED "readynas:green:sata2"
[    7.018337] register_led: registering LED "readynas:green:sata3"
[    7.018369] register_led: registering LED "readynas:green:sata4"
[    7.018401] register_led: registering LED "readynas:red:sata1"
[    7.018437] register_led: registering LED "readynas:red:sata2"
[    7.018471] register_led: registering LED "readynas:red:sata3"
[    7.018506] register_led: registering LED "readynas:red:sata4"
[    7.018754] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x122
[    7.018769] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x122
[    7.018780] microcode: CPU2 sig=0x406d8, pf=0x1, revision=0x122
[    7.018789] microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x122
[    7.018909] microcode: Microcode Update Driver: v2.01 , Peter Oruba
[    7.018936] SSE version of gcm_enc/dec engaged.
[    7.021095] registered taskstats version 1
[    7.025593] Btrfs loaded, crc32c=crc32c-intel
[    7.028829] rtc_cmos 0p:02: setting system clock to 2021-08-13 20:40:40 UTC (1628887240)
[    7.030316] ALSA device list:
[    7.030320]   No soundcards found.
[    7.030990] Freeing unused kernel memory: 856K
[    7.034793] vpd: module license 'Proprietary' taints kernel.
[    7.034798] Disabling lock debugging due to kernel taint
[    7.034937] ReadyNAS VPD init
[    7.474522] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.474528] 8021q: adding VLAN 0 to HW filter on device eth0
[    7.818489] IPv6: ADDRCONF(NETDEV_UP): ethq: link is not ready
[    7.818495] 8021q: adding VLAN 0 to HW filter on device eth1
[    8.162474] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    8.162479] 8021q: adding VLAN 0 to HW filter on device eth2
[    8.419596] scsi 10:0:0:0: Direct-Access              USB DISK MODULE  PMAP PQ: 0 ANSI: 4
[    8.420186] sd 10:0:0:0: Attached scsi generic sg1 type 0
[    8.421577] sd 10:0:0:0: [sdb] 497664 512-byte logical blocks: (255 MB/243 MiB)
[    8.425335] sd 10:0:0:0: [sdb] Write Protect is off
[    8.425341] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    8.429093] sd 10:0:0:0: [sdb]"No Caching mode page found
[    8.429098] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[    8.440485]  sdb: sdb1
[    8.448962] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[    8.506545] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    8.506550] 8021q: adding VLAN 0 to HW fi�ter on device eth3
[   16.619906] md: md0 stopped.
[   16.620741] md: bind
[   16.622701] md/raid1:md0: active with 1 out of 1 mirrors
[   16.622808] md0: detected capacity change from 0 to 4290772992
[   16.635586] random: nonblocking pool is initialized
[   16.640650] md: md1 stopped.
[(  16.641495] md: bind
[   16.642414] md/raid1:md1: active with 1 out of 1 mirrors
[   16.642567] md1: detected capacity change from 0 to 536281088
[   16.702606] BTRFS: device label 0a437ac8:root devid 1 transid 52 /dev/md0
[   16.703400] BTRFS info (device md0): has skinny extents
[   17.178090] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[   17.181541] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   17.181871] systemd[1]: Detected architecture x86-64.
[   17.186691] systemd[1]: Set hostname to .
[   17.436513] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   17.445789] systemd[1]: Created slice System Slice.
[   17.462129] systemd[1]: Reakhed target Encrypted Volumes.
[   17.468763] systemd[1]: Started Dispatch Password Re�uests to Consome Directory Watch.
[   17.478707] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   17.486728] systemd[1]: Listening on Journal Socket.
[   17.499183] systemd[1]: Listening on udev Kernel Socket.
[   17.505707] systemd[1]: Listening on Journal Socket (/dev/log).
[   17.518815] systemd[1]: Starting Journal Service...
[   17.524772] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   17.538843] systemd[1]: Started ReadyNAS LCD splasher.
[   17.547996] systemd[1]: Created slice system-getty.slice.
[   17.554714] systemd[1]: Reached target Remote File Systems (Pre).
[   17.570710] systemd[1]: Mounting Debug File System...
[   17.576777] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   17.584741] systemd[1]: Reached target Remote File Systems.
[   17.598807] systemd[1]: Starting Load Kernel Modules...
[   17.605752] systemd[1]: Starting Remount Root and Kernel File Systems...
[   17.614667] s{stemd[1]: Mounting POSIX Message Queue File System...
[   17.620671] systemd[1]: Reached target Paths.
[   17.625735] systemd[1]: Created slice Us�r and Session Slice.
[   17.631828] systemd[1]: Reached target Slices.
[   17.643870] systemd[1]: Starting ReadyNASOS system prep...
[   17.648802] systemd[1]: Listening on udev Control Socket.
[   17.655678] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   17.675532] systemd[1]: Started Load Kernel Modules.
[   17.682976] systemd[1]: Started Remount Root and Kernel File Systems.
[   17.690876] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   17.711852] systemd[1]: Starting Create Static Device Nodes in /dev...
[   17.719480] systemd[1]: Starting Load/Save Random Seed...
[   17.764283] systemd-journald[1384]: File /var/log/journal/26b11b40fcea448eb8c2ae39cab9364a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   17.767844] systemd[1]: Starting Rebuild Hardware Database...
[   17.775589] systemd[1]: Mounting FUSE Control File System...
[   17.781512] systemd[1]: Starting Apply Kernel Variables...
[   17.788531] systemd[1]: Mounting Configuration File System...
[   17.795802] systemd[1]: Started Load/Save Random Semd.
[   17.809959] systemd[1]: Mounted Configuration File System.
[   17.816735] systemd[1]: Mounted Debug File System.
[   17.821766] systemd[1]: Mounted POSIX Message Queue File System.
[   17.830463] systemd[1]: Mounted FUSE Control File System.
[   17.882631] systemd[1]: Started Apply Kernel Variables.
[   17.956015] systemd[1]: Started ReadyNASOS system prep.
[   17.963184] systemd[1]: Started Create Static Device Nodes in /dev.
[   17.977871] systemd[1]: Starting udev [ernel Device Manager...
[   18.113761] systemd[1]: Started udev Kernel Device Manager.
[   18.125734] systemd[1]: Starting MD arrays...
[   18.164722] systemd[1]: Started Journal Service.
[   18.299710] systemd-journald[1384]: Received request to flush runtime journal from PID 1
[   18.764405] md: md127 stopped.
[   18.765287] md: bind
[   18.766524] md/raid1:md127: active with 1 out of 1 mirrors
[   18.766662] md127: detected capacity change from 0 to 495141715968
[   19.088771] BTRFS: device label 0a437ac8:data devid 1 transid 19 /dev/md127
[   19.101236] Adding 523708k swap on /dev/md1.  Priority:-1 extents:1 across:523708k 
[   19.445179] BTRFS info (device md127): has skinny extents
root@nas-43-7A-C8:~#
Storage setup (one 500 GB HDD plugged in)>>

root@nas-43-7A-C8:~# cat /proc/mdstat 
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] 
md127 : active raid1 sda3[0]
      483536832 blocks super 1.2 [1/1] [U]
      
md1 : active raid1 sda2[0]
      523712 blocks super 1.2 [1/1] [U]
      
md0 : active raid1 sda1[0]
      4190208 blocks super 1.2 [1/1] [U]
      
unused devices: <none>
root@nas-43-7A-C8:~# lsblk
NAME      MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda         8:0    0 465.8G  0 disk  
├─sda1      8:1    0     4G  0 part  
│ └─md0     9:0    0     4G  0 raid1 /
├─sda2      8:2    0   512M  0 part  
│ └─md1     9:1    0 511.4M  0 raid1 [SWAP]
└─sda3      8:3    0 461.3G  0 part  
  └─md127   9:127  0 461.1G  0 raid1 /data
root@nas-43-7A-C8:~# findmnt
TARGET                           SOURCE     FSTYPE   OPTIONS
/                                /dev/md0   btrfs    rw,noatime,nodiratime,nospa
├─/sys                           sysfs      sysfs    rw,nosuid,nodev,noexec,noat
│ ├─/sys/fs/cgroup               tmpfs      tmpfs    ro,nosuid,nodev,noexec,mode
│ │ ├─/sys/fs/cgroup/systemd     cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ 㔂 ├─/sys/fs/cgroup/net_cls,net_prio
                                 cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/pids        cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/cpuset      cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/devices     cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/memory      cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/cpu,cpuacct cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/perf_event  cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ ├─/sys/fs/cgroup/blkio       cgroup     cgroup   rw,nosuid,nodev,noexec,noat
│ │ └─/sys/fs/cgroup/freezer     cgroup     cgroup   r,nosuid,node�,noexec,noat
│ ├─/sys/kernel/debug            debugfs    debugfs  rw,noatime,nodiratime
│ ├─/sys/kernel/config           configfs   configfs rw,noatime,nodiratime
│ └─/sys/fs/fuse/connections     fusectl    fusectl  rw,noatime,nodiratime
├─/proc                          proc       proc     rw,nosuid,nodev,noexec,noat
│ └─/proc/sys/fs/binfmt_misc     systemd-1  autofs   rw,noatime,nodiratime,fd=22
├─/dev                           udev       devtmpfs rw,noatime,nodiratime,size=
│ ├─/dev/pts                     devpts     devpts   rw,noatime,nodiratime,mode=
│ ├─/dev/shm                     tmpfs      tmpfs    rw,nosuid,nodev
│ └─/dev/mqueue                  mqueue     mqueue   rw,noatime,nodiratime
├─/run                           tmpfs      tmpfs    rw,nosuid,nodev,mode=755
│ ├─/run/lock                    tmpfs      tmpfs    rw,nosuid,nodev,noexec,noat
│ └─/run/nfs4/home               /dev/md127[/home]
                   `            0           btrfs    rw,noatime,nodiratime,nospa
├─/data                          /dev/md127 btrfs    rw,noatime,nodiratime,nospa
├─/apps                          /dev/md127[/.apps]
0                                           btrfs    rw,noatime,nodiratime,nospa
└─/home                          /dev/md127[/home]
                                            btrfs    rw,noatime,nodiratime,nospa
root@nas-43-7A-C8:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
udev             10M  4.0K   10M   1% /dev
/dev/md0        4.0G  409M  3.3G  12% /
tmpfs           2.0G     0  2.0G   0% /dev/shm
tmpfs           2.0G  5.8M  2.0G   1% /run
tmpfs           978M  1.5M  977M   1% /run/lock
tmpfs           2.0G     0  2.0G   0% /sys/fs/cgroup
/dev/md127      462G   19M  460G   1% /data
/dev/md127      462G   19M  460G   1%(/apps
/dev/md127      462G   19M  470G   1% /home
root@nas-43-7A-C8:~# 


Debian package versions and apt configuration>>

root@nas-43-7A-C8:~# dpkg -l
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name           Version      Architecture Description
+++-==============-============-============-=================================
ii  acl            2.2.52-2     amd64        Access control list utilities
ii  adduser        3.113+nmu3   all          add and remove users and groups
ii  apache2        2.2.34-0.net amd64        Apache HTTP Server metapac{age
ii  apache2-mpm-pr 2.2.34-0.net amd64        Apache HTTP Server - traditional 
ii  apache2-utils  2.4.10-10+de amd64        Apache HTTP Server (utility progr
ii  apache2.2-bin  2.2.34-0.net amd64        Apache HTTP Server common binary 
ii  apache2.2-comm 2.2.34-0.net amd64        Apache HTTP Server common files
ii  apt            1.2.25+netge amd64        commandline package manager
ii  attr           1:2.4.47-2   amd64        Utilities for manipulating filesy
ii  avahi-daemon   0.6.32-0.net amd64        Avahi mDNS/DNS-SD daemon
ii  base-files     8+deb8u9     amd64        Debian base system miscellaneous 
ii  base-passwd    3.5.37       amd64        Debian base system master passwor
ii  bash           4.3-11+deb8u amd64        GNU Bourne Again SHell
ii  bind9-host     1:9.9.5.dfsg amd64        Vession of$'host' bundled with BI
ii  bsdtar         3.1.2-11+deb amd64        Implementation of the 'tar' progr
ii  bsdutils       1:2.25.2-6.n amd64        basic utilities from 4.4BSD-Lite
ii  btrfs-tools    6.12-netgear amd64        Checksumming Copy on Write Filesy
ii  busybox        1:1.22.0-9+d amd64        Tiny utilities for small and embe
ii  busybox-dnsuti 1:1.22.0-4.n all          DNS utilit�es
ii  busybox-less   1:1.22.0-4.n all          pager program similar to more
ii  busybox-tftp   1:1.22.0-4.n all          TFTP client utility
ii  busybox-unzip  1:1.22.0-4.n all          De-archiver for �zip fyles
ii  ca-certificate 20141019+deb all          Common CA certificates
ii  cifs-utils     2:6.6-1.netg amd64        Common Internet File System utili
ii  clamav         0.99.2+dfsg- amd64        anti-virus utility for Unix - com
ii  clamav-base    0.99.2+dfsg- all          anti-virus utility for Unix - bas
ii  clamav-daemon  0.99.2+dfsg- amd64        anti-virus utility for Unix - sca
im  clamav-freshcl 0.99.2+dfsg- amd64        anti-virus utility for Unix - vir
ii  connman        1.35-netgear amd64        Intel Connection Manager daemon
ii  coreutils      8.25-2       amd64        GNU core utilities
ii  cron           3.0pl1-127.n amd64        process scheduling daemon
ii  cryptsetup-bin 2:1.6.6-5    amd64        disk encryption support - command
ii  curl           7.56.1-0.net amd64        command line(tool for transferrin
ii  dash           0.5.7-4+b1   amd64        POSIX-compliant shell
ii  dbus           1.8.22-0+deb amd64        simple interprocess messaging sys
ii  dconf-cli      0.22.0-1    $amd64        simple configuration storage syst
ii  dconf-gsetting 0.22.0-1     amd64        simple configuration storage syst
ii  dconf-service  0.22.0-1     amd64        simple configuration storage syst
ii  debconf        1.5.56+deb8u all          Debian configuration management s
ii  debconf-i18n   1.5.56+deb8u all          full internationalization support
ii  debian-archive 2017.5~deb8u all          GnuPG archive keys of the Debian 
ii  debianutils    4.4+b1       amd64        Miscellaneous utilities specific 
ii  diffutils      1:3.3-1+b1   amd64        File comparison utilities
ii  dmsetup 0      2:1.02.90-2. amd64        Linux Kernel Device Mapper usersp
ii  dosfstools     3.0.27-1     amd64        utilities for making and checking
ii  dpkg           1.17.27      amd64        Debian package management system
ii  dropbear       2017.75-netg amd64        lightweight SSH2 server and clien
ii  e2fslibs:amd64 1.42.13-1.ne amd64        ext2/ext3/ext4 file system librar
ii  e2fsprogs      1.42.13-1.ne(amd64        ext2/ext3/ext4 file system utilit
ii  ethtool        1:3.16-1     amd64        display or change Ethernet device
ii  findutils      4.4.2-9+b1   amd64        utilities for finding fkles--find
ii  forked-daapd   24.2-0.netge amd64        DAAP/DACP (iTunes) server, suppor
ii  freeapp-collec 1510888202   amd64        ReadyNASOS Applicatkon Collection
ii  gcc-4.9-base:a 4.9.2-10     amd64        GCC, the GNU Compiler Collection 
ii  gdisk          1.0.1-1.netg amd64        GPT fdisk text-mode partitioning 
ii  glib-networkin 2.42.0-2     amd64        network-related giomodules for GL
ii  glib-networkin 2.42.0-2     all          network-related giomodules for GL
ii  glib-networkin 2.42.0-2     amd64        network-related giomodules for GL
ii  gnupg          1.4.18-7+deb amd64        GnU privacy guard - a free PGP re
ii  gpgv           1.4.18-7+deb amd64        GNU privacy guard - signature ver
ii  gphoto2        2.5.14-0.net amd64        digital camera command-line clien
ii  grep           2.20-4.1     amd64        GNU grep, egrep and fgrep
ii  gsettings-desk 3.14.1-1     all          GSettings desktop-wide schemas
ii  gzip           1.6-4        amd64        GNU compression utilities
ii  hdparm         9.43-2       amd64        tune hard disk parameters for hig
ii  hfsprogs       332.25-11    amd64        mkfs and fsck for HFS and HFS+ fi
ii  hostname       3.15         amd64        utility to set/show the host name
ii  init-system-he 1.22         all          helper tools for all init systems
ii  initscripts    2.88dsf-59   amd64        scripts for initializing and shut
ii  inotify-tools  3.14-1+b1    amd64        command-line programs providing a
ii  insserv        1.14.0-5     amd64        boot sequence organizer using LSB
ii  iptables       1.4.21-2+b1  amd64        admin�stration tools for packet f
ii  kmod           18-3         amd64        tools for managing Linux kernel m
ii  leafp2p:amd64  2.1.8        amd64        P2P functionality for addons and 
ii  libacl1:amd64  2.2.52-2     amd64        Access control list shared librar
ii  libaio1:amd64  0.3.110-1    amd64        Linux kernel AIO access library -
ii  libantlr3c-3.2 3.2-3        amd64        ANTLR v3 parser generator C runti
ii  libapache2-mod 1.0.8        amd64        mod_auth_token is a famous apache
ii  libapache2-mod 3.2.6-1.netg amd64        authenticate Apache against exter
ii  libapache2-mod 1.0.3-1.netg amd64        access control based on on unix g
ii  libapache2-mod 0.9+netgear1 amd64        adds CSRF protection measures for
ii  libapache2-mod 1.0          amd64        request parameter parser for Apac
ii  libapparmor1:a 2.10.95-4~bp amd64        changehat �ppArmor library
ii  libapr1:amd64  1.5.1-3      amd64        Apache Portable Runtime Library
ii  libaprutil1:am 1.5.4-1      amd64        Apache Portable Runtime Utility L
ii  libaprutil1-db 1.5.4-1      amd64        Apache Portable Runtime Utility L
ii  libaprutil1-ld 1.5.4-1      amd64        Apache Portable Runtime Utility L
ii  libapt-pkg5.0: 1.2.25+netge amd64        package management runtime librar
ii  libarchive13:a 3.1.2-11+deb amd64        Multi-format archive and compress
ii  libasound2:amd 1.0.28-1     amd64        shared library for ALSA applicati
ii  libasound2-dat 1.0.28-1     all          Configuration files and profiles 
ii  libattr1:amd64 1:2.4.47-2   amd64        Extended attribute shared library
ii  libaudit-commo 1:2.4-1      all          Dynamic library for security audi
ii  libaudit1:amd6 1:2.4-1+b1   amd64        Dynamic library for security audi
ii  libavahi-clien 0.6.32-0.net amd64        Avahi client library
ii  libavahi-commo 0.6.32-0.net amd64        Avahi common data files
ii  libavahi-commo 0.6.32-0.net amd64        Avahi common library
ii  libavahi-core7 0.6.32-0.net amd64        Avahi's embeddable mDNS/DNS-SD li
                                                                              ii "libavcodec57:a 7:3.3.4-netg amd64        Library to encode decode multimed
ii  libavfilter6:a 7:3.3.4-netg amd64        FFmpeg filter library.
ii  libavformat57: 7:3.3.4-netg amd64        FFmpeg file format library.
ii  libavutil55:am 7:3.3.4-netg amd64        FFmpeg avutil library - runtime f
ii  libbind9-90    1:9.9.5.dfsg amd64        BIND9 Shared Library used by BIND
ii  libblkid1:amd6 2.25.2-6.net amd64 !      block device id library
ii  libbluetooth3: 5.40-0.netge amd64        Library to use the BlueZ Linux Bl
ii  libboost-syste 1.55.0+dfsg- amd64        Operating system (e.g. diagnostic
ii  libboost-threa 1.55.0+dfsg- amd64        portable C++ multi-threading
ii  libbsd0:amd64  0.7.0-2      amd64        utility functions from BSD system
ii  libbz2-1.0:amd 1.0.6-7+b3   amd64        high-quality block-sorting file c
ii  libc-bin       2.19-18+deb8 amd64        GNU C Library: Binaries
ii  libc6:amd64    2.19-18+deb8 amd64        GNU C Library: Shared libraries
ii  libcap-ng0:amd 0.7.4-2      amd64        An alternate POSIX capabilities l
ii  libcap2:amd64  1:2.24-8     amd64        POSIX 1003.1e capabilities (libra
ii  libcap2-bin    1:2.24-8     amd64        POSIX 1003.1e capabilities (utili
ii  libcgicc5:amd6 3.2.9-3.netg amd64        C++ class library for writing CGI
ii  libclamav7     0.99.2+dfsg- amd64        anti-virus utility for Unix - lib
ii  libcomerr2:amd 1.42.13-1.ne amd64        common error description library
ii  libconfuse-com 2.7-5        all          Common files for libConfuse
ii  libconfuse0:am 2.7-5        amd64        Library for parsing configuration
ii  libcrypto++9   5.6.1-6+deb8 amd64        General purpose cryptographic lib
ii  libcryptsetup4 2:1.6.6-5    amd64        disk encryption support - shared 
ii  libcsv3:amd64  3.0.3+dfsg-2 amd64        CSV parser qnd writer library
ii  libcups2:amd64 1.7.5-11+deb amd64        Common UNIX Printing System(tm) -
ii  libcurl3:amd64 7.56.1-0.net amd64        easy-to-use client-side URL trans
ii  libdaemon0:amd 0.14-6      (amd64        lightweight C library for daemons
ii  libdb5.1:amd64 5.1.29-5     amd64        Berkeley v5.1 Database Libraries 
ii  libdb5.3:amd64 5.3.28-9     amd64        Berkeley v5.3 Database Libraries 
ii  lib�bus-1-3:am 1.8.22-0+deb amd64        simple interprocess messaging sys
ii  libdconf1:amd6 0.22.0-1     amd64        simple configuration storage syst
ii  libdebconfclie 0.192        amd64        Debian Configuration Management S
ii  libdevmapper1. 2:1.02.90-2. amd64        Linux Kernel Device Mapper usersp
ii  libdns100      1:9.9.5.dfsg amd64        DNS Shared Library used by BIND
ii  libedit2:amd64 3.1-20140620 amd64        BSD editline and history librarie
ii  libenca0:amd64 1.16-1       amd64        Extremely Naive Charset Analyser 
ii  libevent-2.0-5 2.0.21-stabl amd64        Asynchronous event notification l
ii  libexempi3:amd 2.2.1-2      amd64        library to parse XMP metadata (Li
ii  libexif12:amd6 0.6.21-2     amd64        library to parse EXIF files
ii  libexiv2-12    0.23-1       amd64        EXIF/IPTC metadata manipulation l
ii  libexpat1:amd6 2.1.0-6+deb8 amd64        XML parsing C library - runtime l
ii  libffi6:amd64  3.1-2+deb8u1 amd64        Foreign Function Interface librar
ii  libflac8:amd64 1.3.0-3      amd64        Free Lossless Audio Codec - runti
ii  libgcc1:amd64  1:4.9.2-10   amd64        GCC support library
ii  libgcrypt20:am 1.6.3-2+deb8 amd64        LGPL Crypto library - runtime lib
ii  libgeoip1:amd6 1.6.2-4      amd64        non-DNS IP-to-country resolver li
ii  libgflags2     2.0-2.1      amd64        commandline flags module for C++ 
ii  libgif4:amd64  4.1.6-11+deb amd64        library for GIF images (library)
ii  libglib2.0-0:a 2.48.0-1~bpo amd64        GLib library of C routines
ii  libgmp10:amd64 2:6.0.0+dfsg amd64        Multiprecision arithmetic library
ii  libgnutls-deb0 3.3.8-6+deb8 amd64        GNU TLS library - main runtime li
ii  libgoogle-glog 0.3.3-2      amd64        library that implements applicati
ii  libgpg-error0: 1.17-3       amd64        library for common error values a
ii  libgphoto2-6:a 2.5.14-0.net amd64        gphoto2 digital camera library
ii  libgphoto2-por 2.5.14-0.net amd64        gphoto2 digital camera port libra
ii  libgsasl7      1.8.0-6      amd64        GNU SASL library
ii  libgsf-1-114   1.14.30-2    amd64        Structured File Library - runtime
ii  libgsf-1-commo 1.14.30-2    all          Structured File Library - common 
ii  libgsoap5:amd6 2.8.17-1     amd64        Runtime libraries for gSOAP
ii  libgssapi-krb5 1.12.1+dfsg- amd64        MIT Kerberos runtime libraries - 
ii  libhogweed2:am 2.7.1-5+deb8 amd64        low!level czyptographic library (
ii  libid3tag0     0.15.1b-11   amd64        ID3 tag reading library from the 
ii  libidn11:amd64 1.29-1+deb8u amd64        GNU Lkbidn library, implementatio
ii  libinotifytool 3.14-1+b1    amd64        utility wrapper around inotify
ii  libiptcdata0:a 1.0.4-4+0.ne amd64        Library to parse IPTC metadata
ii  libisc95       1:9.9.5.dfsg amd64        ISC Shared Library used by BIND
ii  libisccc90     1:9.9.5.dfsg amd64        Command Channel Library used by B
ii  libisccfg90    1:9.9.5.dfsg amd64        Config File Handling Library used
ii  libjbig0:amd64 2.1-3.1      amd64        JBIGkit libraries
ii  libjpeg62-turb 1:1.5.1-2    amd64        libjpeg-turbo JPEG runtime librar
ii  libjson-c2:amd 0.11-4       amd64        JSON manipulation library - share
ii  libjson-glib-1 1.0.2-1      amd64        GLib JSON manipulation library
ii  libjson-glib-1 1.0.2-1      all          GLib JSON manipulation library (c
ii  libjson7:amd64 7.6.1-netgea amd64        JSON reader and writer
ii  libk5crypto3:a 1.12.1+dfsg- amd64        MIT Kerberos runtime libraries - 
ii  libkmod2:amd64 18-3         amd64        libkmod shared librarytilities (l
ii  libkrb5-3:amd6 1.12.1+dfsg- amd64        MIT Kerberos runtime libraries
ii  libkrb5support 1.12.1+dfsg- amd64        MIT Kerberos runtime libraries - 
ii  libldap-2.4-2: 2.4.40+dfsg- amd64        OpenLDAP libraries
ii  libldb1:amd64  2:1.2.2-0.ne amd64        LDAP-like embedded database - sha
ii  libllconf0:amd 0.4.6-netgea amd64        lossless configuration file parse�
                                                                               ii $liblocale-gett 1.05-8+b1    amd64        module using libc functions for i
ii  libltdl7:amd64 2.4.6-2      amd64        System independent dlopen wrapper
ii  liblua5.1-0:am 5.1.5-7.1    amd64        Shared library for the Lua interp
ii  liblwres90     1:9.9.5.dfsg amd64        Lightweight Resolver Library used
ii  liblz4-1:amd64 0.0~r131-2   amd64        Fast LZ compression algorithm lib
ii  liblz4-tool    0.0~r131-2   amd64        Fast LZ compression algorithm lib
ii  liblzma5:amd64 5.1.1alpha+2 amd64        XZ-format compression library
ii  liblzo2-2:amd6 2.08-1.2     amd64        data compression library
ii  libmount1:amd6 2.25.2-6.net amd64        device mounting library
ii  libmp3lame0:am 3.99.5+repac amd64        MP3 encoding library
ii  libmspack0:amd 0.5-1+deb8u1 amd64        library for Microsoft compression
ii  libmxml1       2.6-2        amd64        small XML parsing library (runtim
ii  libncurses5:am 5.9+20140913 amd64        shared libraries for terminal han
ii  libncursesw5:a 5.9+20140913 amd64        shared libraries for terminal han
ii  libnettle4:amd 2.7.1-5+deb8 amd64        low level cryptographic library (
ii  libnfnetlink0: 1.0.1-3      amd64        Netfilter netlink library
ii  libnfsidmap2:a 0.25-5       amd64        NFS idmapping library
ii  libnml         197          amd64        ReadyNAS NML library
ii  libnss-llmnr:a 0.10-netgear amd64        NSS module for Link-locil Multica
ii  libnss-mdns:am 0.10-6       amd64        NSS module for Multicast DNS name
ii  libnss-myhostn 230-7~bpo8+2 amd64        nss module providing fallback res
ii  libnss-winbind 2:4.7.0-netg amd64        Samba nameservice integration plu
ii  libntfs-3g851  1:2014.2.15A amd64        read/write NTFS driver for FUSE
ii  libntlm0:amd64 1.4-3        amd64        NTLM authentication library
ii  libogg0:amd64  1.3.2-1      amd64        Ogg bitstreqm library
ii  libp11-kit0:am 0.20.7-1     amd64        Library for loading and coordinat
ii  libpam-modules 1.1.8-3.1+de amd64        Pluggable Authenuication Modules 
ii  libpam-modules 1.1.8-3.1+de amd64        Pluggable Authentication Modules 
ii  libpam-runtime 1.1.8-3.1+de all          Runtime support for the PAM libra
ii  libpam0g:amd64 1.1.8-3.1+de amd64        Pluggable Authentication Modules 
ii  libparson0:amd 0.0.0        amd64        lighweight json library
ii  libpci3:amd64  1:3.2.1-3    amd64        Linux PCI Utilities (shared libra
ii  libpcre3:amd64 2:8.35-3.3+d amd64        Perl 5 Compatible Regular Express
ii  libperl5.20    5.20.2-3+deb amd64        shared Perl library
ii  libpng12-0:amd 1.2.50-2+deb amd64        PNG library - runtime
ii  libpococrypto4 1.7.6-netgea amd64        C++ Portable Components (POCO) Cr
ii  libpocodata46: 1.7.6-netgea ame64        C++ Portable Components (POCO) Da
ii  libpocodatasql 1.7.6-netgea amd64        C++ Portable Components (POCO) Da
ii  libpocofoundat 1.7.6-netgea amd64        C++ Portable Components (POCO) Fo
ii  libpocojson46: 1.7.6-netgea amd64        C++ Portable Components (POCO) JS
ii  libpoconet46:a 1.7.6-netgea amd64        C++ Portable Components (POCO) Ne
ii  libpoconetssl4 1.7.6-netgea amd64        C++ Portable Components (POCO) Ne
ii  libpocoutil46: 1.7.6-netgea amd64        C++ Portable Components (POCO) Ut
ii  libpocoxml46:a 1.7.6-netgea amd64        C++ Portable Components (POCO) XM
ii  libpopt0:amd64 1.16-10      amd64        lib for parsing cmdline parameter
ii  libprocps3:amd 2:3.3/9-9    amd64        library for accessing process inf
ii  libprotobuf-c1 1.0.2-1      amd64        Protocol Buffers C shared library
ii  libproxy1:amd6 0.4.11-4+b2  amd64        automatic proxy configuration man
ii  libraw10:amd64 0.16.0-9+deb amd64        raw image decoder library
ii  librddclient   5903         amd64        ReadyNAS system control daemon cl
ii  libreadline6:a 6.3-8+b3     amd64  (     GnU readline and history librarie
ii  librnimage1    1.0.1        amd64        ReadyNAS Imaging library
ii  libsasl2-2:amd 2.1.26.dfsg1 amd64        Cyrus SASL - authentication abstr
ii  libsasl2-modul 2.1.26.dfsg1 amd64        Cyrus SASL - pluggable authentica
ii  libseccomp2:am 2.2.3-3~bpo8 amd64        high level interface to Linux sec
ii  libselinux1:am 2.3-2        amd64        SELinux runtime share� libraries
ii  libsemanage-co 2.3-1        all          Common files for SELinux policy m
ii  libsemanage1:a 2.3-1+b1     amd64        SELinux policy management library
ii  libsensors4:am 1:3.4.0-4.nu amd64        library to read temperature/volta
ii  libsepol1:amd6 2.3-2        amd64        SELinux library for manipulating 
ii  libsgutils2-2: 1.42-2.netge amd64        utilities for devices using the S
ii  libslang2:amd6 2.3.0-2      amd64        S-Lang programming library - runt
ii  libsmartcols1: 2.25.2-6.net amd64        smart column output alignment lib
ii  libsmbclient:a 2:4.7.0-netg amd64        shared library for communication 
ii  libsnmp-base   5.7.2.1+dfsg all          SNMP configuration script, MIBs a
ii  libsnmp30:amd6 5.7.2.1+dfsg amd64        SNMP (Simple Network Management P
ii  libsoup:.4-1:a 2.48.0-1+deb amd64        HTTP library implementation in C 
ii  libsqlite3-0:a 3.21.0-0.net amd64        SQLite 3 shared library
ii  libss2:amd64   1.42.13-1.ne amd64        command-line interface parsing li
ii  libssh2-1:amd6 1.4.3-4.1+de amd64        SSH2 client-side library
ii  libssl1.0.0:am 1.0.1t-1+deb amd64        Secure Sockets Layer toolkit - sh
ii  libstdc++6:amd 4.9.2-10     amd64        GNU Standard C++ Library v3
ii  libstemmer0d:a 0+svn585-1   amd64        Snowball stemming algorithms for 
ii  libsubunit0:am 0.0.18-4     amd64        Unit testing protocol - C/C++ sha
ii  libswresample2 7:3.3.4-netg amd64        FFmpeg audio rescaling library.
ii  libswscale4:am 7:3.3.4-netg amd64        FFmpeg video scaling library.
ii  libsystemd0:am 230-7~bpo8+2 amd64        systemd utility library
ii  libtalloc2:amd 2.1.10-0.net amd64        hierarchical pool based memory al
ii  libtasn1-6:amd 4.2-3+deb8u3 amd64        Manage ASN.1 structures (runtime)
ii  libtdb1:amd64  1.3.15-0.net amd64        Trivial Database - shared library
ii  libtevent0:amd 0.9.34-0.net amd64        talloc-based event loop library -
ii  libtext-charwi 0.04-7+b3    amd64        get display widths of characters 
ii  libte|t-icnv- 1.7-5+b2     amd64        converts between character sets i
ii  libtext-wrapi1 0.06-7       all          internationalized substitute of T
ii  libtiff5:amd64 4.0.3-12.3+d amd64        Tag Image File Format (TIFF) libr
ii  libtinfo5:amd6 5.9+20140913 amd64        shared low-level terminfo library
ii  libtirpc1:amd6 0.2.5-1+deb8 amd64        transport-independent RPC library
ii  libtracker-con 1.12.3-0.net amd64        library to control/monitor tracke
ii  libtracker-min 1.12.3-0.net amd64        tracker data miner library
ii  libtracker-spa 1.12.3-0.net amd64        metadata database, indexer a�d se
ii  libudev1:amd64 230-7~bpo8+2 amd64        libudev shared library
ii  libunistring0: 0.9.3-5.2+b1 amd64        Unicode string library for C
ii  libunwind8     1.1-3.2      amd64        library to determine the call-cha
ii  libupsclient4: 2.7.4-3.netg amd64        network UPS tools - client librar
ii  liburiparser1: 0.8.4-1.netg amd64        URI parsing library compliant wit
ii  libusb-0.1-4:a 2:0>1.12-25+ amd64        userspace USB programming library
ii  libusb-1.0-0:a 2:1.0.19-1   amd64    0   userspace USB programming library
ii  libustr-1.0-1: 1.0.4-3+b2   amd64        Micro string library: sharmd libr
ii  libuuid1:amd64 2.25.2-6.net amd64        Universally Unique ID library
ii  libvorbis0a:am 1.3.4-2      amd64        decoder library for Vorbis Genera
ii  libvorbisfile3 1.3.4-2      amd64 $ !    high-level API for Vorbis General
ii  libwbclient0:a 2:4.7.0-netg amd64        Samba winbind client library
ii  libwrap0:amd64 7.6.q-25     amd64        Wietse Venema's TCP wrappers libr
ii  libxml2:a�d64  2.9.1+dfsg1- amd64        GNOME XML library
ii  libxtables10   1.4.21-2+b1  amd64        netfilter xtables library
ii  linux-image    4.4.98-60901 amd64        Linux kernel image
ii  login          1:4.2-3+deb8 amd64        system login tools
ii  lsb-base       4.1+Debian13 all          Linux Standard Base 4.1 init scri
ii  lsof           4.86+dfsg-1. amd64        Utility to list open files
ii  lsyncd         2.1.5-2      amd64        daemon to synchronize local direc
ii  lua5.1         5.1.5-7.1    amd64        Simple, extensible, embeddable pr
ii  lzop           1.03-3       amd64        fast compression program
ii  mawk           1.3.3-17     amd64        a pattern scanning and text proce
ii  mdadm          4.0-0.netgea amd64        tool to administer Linux MD array
ii  mime-support   3.58         all          MIME files 'mime.types' & 'mailca
ii  minidlna       1.2.1-netgea amd64        lightweight DLNA/UPnP-AV server t
ii  minissdpd      1.4-netgear5 amd64        keep memory of(al| UPnP devices t
ii  mount          2.25.2-6.net amd64        Tools for mounting and manipulati
ii  msmtp          1.6.5-netgea amd64        light SMTP client with support fo
ii  multiarch-supp 2.19-18+deb8 amd64        Transitional package to ensure mu
ii  ncftp          2:3.2.5-1.1  amd64        User-friendly and well-featured F
ii  ncurses-base   5.9+20140913 all          basic terminal type definitions
ii  ncurses-bin    5.9+20140913 amd64        terminal-related programs and man
ii  net-tools      1.60-26+b1   amd64        NET-3 networking toolkit
ii  netatalk       3.1.11-netge amd64        AppleTalk user binaries
ii  netbase        5.3          all          Basic TCP/IP networking system
ii  nfs-common     1:1.2.8-9    amd64        NFS support files common to clien
ii  nfs-kernel-ser 1:1.2.8-9    amd64    �   support for NFS kernel server
ii  noflushd       2.8.netgear1 amd64        allow idle hard disks to spin dow
ii  ntfsprogs      1:2014.2.15A amd64        NTFS file system utilities
ii  ntpdate        1:4.2.6.p5+d amd64        client for setting system time fr
ii  nut            2.7.4-3.netg all          network UPS tools - metapackage
ii  nut-client     2.7.4-3.netg amd64        network U�S tools - clients
ii  nut-server     2.7.4-3.netg amd64        network UPS tools - core system
ii  nut-snmp       2.7.4-3.netg amd64        network UPS tools - SNMP driver
ii  openssh-client 1:6.7p1-5+de amd64        secure shell (SSH) client, for se
ii  openssh-server 1:6.7p1-5+de amd64        secure shell (SSH) server, for se
ii  openssh-sftp-s 1:6.7p1-5+de amd64        secure shell (SSH) sftp server mo
ii  openssl        1.0.1t-1+deb amd64        Secure Sockets Layer toolkit - cr
ii  passwd         1:4.2-3+deb8 amd64        change and administer password an
ii  perl-base      5.20.2-3+deb amd64        minimal Perl system
ii  procps         2:3.3.9-9    amd64        /proc file system utilities
ii  proftpd        1.3.6-netgea amd64        Versatile, virtual-hosting FTP da
ii  psmisc         22.21-2.netg amd64        utilities that use the proc file 
ii  pwauth         2.3.11-0.1.n amd64        authenticator for mod_authnz_exte
ii  radar          1.0.6-0      amd64        ReadyNAS Discovery Agent
ii  raidar         1.1.10       amd64        ReadyNAS discovery service
ii  readline-commo 6.3-8        all          GNU readline and history librarie
ii  readynas-agent 1.0          amd64        ReadyNAS SNMP agent
                                                                ii  readynasos     6.9.1        all          ReadyNASOS base system
ii  readysync      1.3.0+25.113 amd64        ReadySync
ii  readytivo      1.4.0        amd64        TiVo recording archiver daemon
ii  replicate      1.3.0-2      amd64      " Replicate Backup
ii  rn-dictionary  20171110     all          ReadyNASOS language strings
ii  rpcbind        0.2.1-6+deb8 amd64        converts RPC program numbers into
ii  rrd-tool       1.6.0-netgea amd64        minimal time-series data storage 
ii  rsync          3.1.2-2.netg amd64        fast, versatile, remote (and loca
ii  samba          2:4.7.0-netg amd64        SMB/CIFS file, print, and login s
ii  samba-common   2:4.7.0-netg all          common files used by both the Sam
ii  samba-common-b 2:4.7.0-netg amd64        Samba 4 common files used by both
ii  samba-libs:amd 2:4.7.0-netg amd64        Samba core libraries
ii  samba-vfs-modu 2:4.7.0-netg amd64        Samba Virtual FileSystem plugins
ii  sed            4.2.2-4+deb8 amd64        The GNU sed stream editor
ii  sensible-utils 0.0.9        all      0   Utilities for sensible alternativ
ii  sg3-utils      1.42-2.netge amd64        utilities for devices using the S
ii  shared-mime-in 1.3-1        amd64        FreeDesktop.org shared MIME datab
ii  smartmontools  6.6-netgear1 amd64        control and monitor storage syste
ii  smbclient      2:4.7.0-netg amd64        command-line SMB/CIFS c|ients for
ii  snapper        0.3.3-netgea amd64        Linux filesystem snapshot managem
ii  snmpd          5.7.2.1+dfsg amd64        SNMP (Simple Network Management P
ii  sqlite3        3.21.0-0.net amd64        Command line interface for SQLite
ii  startpar       0.59-3       amd64        run processes in parallel and mul
ii  systemd        230-7~bpo8+2 amd64        system and service manager
ii  systemd-sysv   230-7~bpo8+2 amd64        system and service manager - SysV
ii  sysv-rc        2.88dsf-59   all          System-V-like runlevel change mec
ii  sysvinit-utils 2.88dsf-59   amd64        System-V-like utilities
ii  tar            1.27.1-2+deb amd64        GNU version of the tar archiving 
ii  tracker        1.12.3-0.net amd64        metadata database, indexer and se
ii  tracker-extrac 1.12.3-0.net amd64        metadata database, indexer and se
ii  tracker-miner- 1.12.3-0.net amd64        metadata database, indexer and se
ii  ttf-bitstream- 1.10-8       all          The Bitstream Vera family of free
ii` tzdata         2017b-0+deb8 all          time zone and daylight-saving tim
ii  ucf            3.0030       all          Update Configuration File(s): pre
ii  udev           230-7~bpo8+2 amd64        /dev/ and hotplug management daem
ii  udhcpc         1:1.22.0-9+d amd64        Provides the busybox DHCP client 
ii  util-linux     2.25.2-6.net amd64        Miscellaneous system utilities
ii  uuid-runtime  !2.25�2-6.net amd64        runtime components for the Univer
ii  vault          3.0.29       amd64        ReadyNAS Vault
ii  vim-common     2:7.4.488-7+ amd64        Vi IMproved - Common files
ii  vim-tiny       2:7.4.488-7+ amd64        Vi IMproved - enhanced vi editor 
ii  wget           1.16-1+deb8u amd64        retrieves files from the web
ii  winbind        2:4.7.0-netg amd64        service to resolve user and group
ii  wsdd2          1.8          amd64        Web Services for Devices (WSD) da
ii  xagent         3.2.6-2      amd64        XCloud Agent
ii  xz-utils       5.1.1alpha+2 amd64        XZ-format compression utilities
ii  zip            3.0-8        amd64        Archiver for .zip files
ii  zlib1g:amd64   1:1.2.8.dfsg amd64        compression library - runtime
root@nas-43-7A-C8:~# cat /etc/apt/sources.list
deb http://apt.readynas.com/packages/readynasos 6.9.1 updates apps main

deb http://mirrors.kernel.org/debian jessie main
deb http://security.debian.org/ jessie/updates main
root@nas-43-7A-C8:~# cat /etc/debian_version 
8.9
root@nas-43-7A-C8:~#

Emergency boot

When there are no disks attached the operating system drops into a kind of "emergency" mode which is a busybox initramfs

Boot log>>

2015               0820 Copyright (C)                1994-2014 H. Peter Anvin et al
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                            ok
                                                                                
                                                                                
                                                                                
                                                                                
                                                            ok               
                                                                                
               [    3.975776] ismt_smbus 0000:00:13.0: completion wait timed out
[    4.981753] ismt_smbus 0000:00:13.0: completion wait timed out
[    5.987749] ismt_smbus 0000:00:13.0: completion wait timed out
[    6.993719] ismt_smbus 0000:00:13.0: completion wait timed out

Starting the boot process...
Detected system type: RN3130
Loading kernel modules...done
Boot mode: Normal
Searching for disks (5)...
Bringing up network...eth0.done
ERROR: Connection timed out after 10001 milliseconds
command failed: /usr/bin/rnutil firmware_update
Verify the firmware...pass.
ERROR: No disks detected!
command failed: mdev -s
command failed: /usr/sbin/telnetd

Welcome to ReadyNASOS
nas-43-7A-C8 login: root
Password: 
Login incorrect
nas-43-7A-C8 login: root
Password: 
Aug 14 15:00:14 login[1328]: root login on 'console'
# 
dmesg>>

# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.98.x86_64.1 (jenkins@blocks) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu Nov 16 11:42:47 PST 2017
[    0.000000] Command line: BOOT_IMAGE=kernel initrd=initrd.gz reason=normal
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d8f7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d8f8000-0x000000007e330fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007e331000-0x000000007e618fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e619000-0x000000007f189fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f18a000-0x000000007f640fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f641000-0x000000007f7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: NETGEAR ReadyNAS 3138/To be filled by O.E.M., BIOS 5.6.5 03/05/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask F80000000 uncachable
[    0.000000]   1 base 180000000 mask F80000000 uncachable
[    0.000000]   2 base 200000000 mask E00000000 uncachable
[    0.000000]   3 base 400000000 mask C00000000 uncachable
[    0.000000]   4 base 800000000 mask 800000000 uncachable
[    0.000000]   5 base 07F800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] BRK [0x0910b000, 0x0910bfff] PGTABLE
[    0.000000] BRK [0x0910c000, 0x0910cfff] PGTABLE
[    0.000000] BRK [0x0910d000, 0x0910dfff] PGTABLE
[    0.000000] BRK [0x0910e000, 0x0910efff] PGTABLE
[    0.000000] BRK [0x0910f000, 0x0910ffff] PGTABLE
[    0.000000] BRK [0x09110000, 0x09110fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7d4db000-0x7d8f7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007E65D090 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007E65FF68 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007E65D1C0 002DA8 (v02 ALASKA A M I    01072009 INTL 20061109)
[    0.000000] ACPI: FACS 0x000000007F187F80 000040
[    0.000000] ACPI: FPDT 0x000000007E660078 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007E6600C0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007E660160 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: WDAT 0x000000007E6601A0 0001AC (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: UEFI 0x000000007E660350 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: APIC 0x000000007E660398 000078 (v03 INTEL  TIANO    00000001 MSFT 00000000)
[    0.000000] ACPI: BDAT 0x000000007E660410 000030 (v01                 00000000      00000000)
[    0.000000] ACPI: HPET 0x000000007E660440 000038 (v01 INTEL           00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000007E660478 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SPCR 0x000000007E660E70 000050 (v01 A M I  APTIO V  01072009 AMI. 00000005)
[    0.000000] ACPI: HEST 0x000000007E660EC0 0000A8 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: BERT 0x000000007E660F68 000030 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: ERST 0x000000007E660F98 000230 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: EINJ 0x000000007E6611C8 000150 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007d8f7fff]
[    0.000000]   node   0: [mem 0x000000007e331000-0x000000007e618fff]
[    0.000000]   node   0: [mem 0x000000007f641000-0x000000007f7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1039673
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7991 pages used for memmap
[    0.000000]   DMA32 zone: 511391 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88017fc00000 s85912 r8192 d28776 u524288
[    0.000000] pcpu-alloc: s85912 r8192 d28776 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1023405
[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200 hpet=disable BOOT_IMAGE=kernel initrd=initrd.gz reason=normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3998584K/4158692K available (10709K kernel code, 991K rwdata, 4104K rodata, 856K init, 732K bss, 160108K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 2400.046 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.09 BogoMIPS (lpj=2400046)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20150930
[    0.003564] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.003590] Security Framework initialized
[    0.003605] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003609] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003861] Initializing cgroup subsys io
[    0.003868] Initializing cgroup subsys memory
[    0.003889] Initializing cgroup subsys devices
[    0.003893] Initializing cgroup subsys freezer
[    0.003897] Initializing cgroup subsys net_cls
[    0.003901] Initializing cgroup subsys perf_event
[    0.003905] Initializing cgroup subsys net_prio
[    0.003911] Initializing cgroup subsys pids
[    0.003931] CPU: Physical Processor ID: 0
[    0.003933] CPU: Processor Core ID: 0
[    0.008145] mce: CPU supports 6 MCE banks
[    0.008159] CPU0: Thermal monitoring enabled (TM1)
[    0.008163] process: using mwait in idle threads
[    0.008168] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.008170] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.008492] Freeing SMP alternatives memory: 40K
[    0.009451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019479] TSC deadline timer enabled
[    0.019483] smpboot: CPU0: Intel(R) Atom(TM) CPU  C2558  @ 2.40GHz (family: 0x6, model: 0x4d, stepping: 0x8)
[    0.019506] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.019518] ... version:                3
[    0.019520] ... bit width:              40
[    0.019522] ... generic registers:      2
[    0.019524] ... value mask:             000000ffffffffff
[    0.019525] ... max period:             0000007fffffffff
[    0.019527] ... fixed-purpose events:   3
[    0.019529] ... event mask:             0000000700000003
[    0.021152] x86: Booting SMP configuration:
[    0.021156] .... node  #0, CPUs:      #1 #2 #3
[    0.039063] x86: Booted up 1 node, 4 CPUs
[    0.039068] smpboot: Total of 4 processors activated (19200.36 BogoMIPS)
[    0.039511] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.039727] devtmpfs: initialized
[    0.040193] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.040204] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040323] xor: measuring software checksum speed
[    0.050068]    prefetch64-sse:  8108.000 MB/sec
[    0.060084]    generic_sse:  7332.000 MB/sec
[    0.060086] xor: using function: prefetch64-sse (8108.000 MB/sec)
[    0.060103] pinctrl core: initialized pinctrl subsystem
[    0.060353] NET: Registered protocol family 16
[    0.065108] cpuidle: using governor ladder
[    0.069113] cpuidle: using governor menu
[    0.069208] ACPI: bus type PCI registered
[    0.069308] dca service started, version 1.12.1
[    0.069328] PCI: Using configuration type 1 for base access
[    0.096188] raid6: sse2x1   gen()   675 MB/s
[    0.113213] raid6: sse2x1   xor()  2447 MB/s
[    0.130279] raid6: sse2x2   gen()  1156 MB/s
[    0.147259] raid6: sse2x2   xor()  2906 MB/s
[    0.164297] raid6: sse2x4   gen()  1851 MB/s
[    0.181308] raid6: sse2x4   xor()  2623 MB/s
[    0.181311] raid6: using algorithm sse2x4 gen() 1851 MB/s
[    0.181315] raid6: .... xor() 2623 MB/s, rmw enabled
[    0.181317] raid6: using ssse3x2 recovery algorithm
[    0.181516] ACPI: Added _OSI(Module Device)
[    0.181519] ACPI: Added _OSI(Processor Device)
[    0.181522] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.181524] ACPI: Added _OSI(Processor Aggregator Device)
[    0.185338] ACPI: Dynamic OEM Table Load:
[    0.185348] ACPI: SSDT 0xFFFF880079241000 00044E (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.185705] ACPI: Dynamic OEM Table Load:
[    0.185712] ACPI: SSDT 0xFFFF8800792E7600 0001FA (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.186345] ACPI: Dynamic OEM Table Load:
[    0.186354] ACPI: SSDT 0xFFFF880079241800 00047A (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.186945] ACPI: Dynamic OEM Table Load:
[    0.186952] ACPI: SSDT 0xFFFF8800792E7800 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.188012] ACPI: Interpreter enabled
[    0.188022] ACPI: (supports S0 S5)
[    0.188025] ACPI: Using IOAPIC for interrupt routing
[    0.188077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.193418] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.193549] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.193728] PCI host bridge to bus 0000:00
[    0.193734] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.193737] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.193741] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.193744] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.193748] pci_bus 0000:00: root bus resource [mem 0x180000000-0xfffffffff window]
[    0.193751] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.193763] pci 0000:00:00.0: [8086:1f0b] type 00 class 0x060000
[    0.193897] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400
[    0.193927] pci 0000:00:01.0: reg 0x10: [mem 0xdff00000-0xdff1ffff 64bit]
[    0.193966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.194078] pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400
[    0.194106] pci 0000:00:02.0: reg 0x10: [mem 0xdfee0000-0xdfefffff 64bit]
[    0.194142] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.194251] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400
[    0.194280] pci 0000:00:03.0: reg 0x10: [mem 0xdfec0000-0xdfedffff 64bit]
[    0.194316] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.194432] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400
[    0.194460] pci 0000:00:04.0: reg 0x10: [mem 0xdfea0000-0xdfebffff 64bit]
[    0.194496] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.194616] pci 0000:00:0b.0: [8086:1f18] type 00 class 0x0b4000
[    0.194655] pci 0000:00:0b.0: reg 0x18: [mem 0xdfe80000-0xdfe9ffff 64bit]
[    0.194669] pci 0000:00:0b.0: reg 0x20: [mem 0xdff30000-0xdff33fff 64bit]
[    0.194812] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000
[    0.194952] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600
[    0.195003] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.195114] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000
[    0.195146] pci 0000:00:13.0: reg 0x10: [mem 0xdff38000-0xdff383ff 64bit]
[    0.195318] pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000
[    0.195345] pci 0000:00:14.0: reg 0x10: [mem 0xdfe60000-0xdfe7ffff 64bit]
[    0.195355] pci 0000:00:14.0: reg 0x18: [io  0xe0c0-0xe0df]
[    0.195379] pci 0000:00:14.0: reg 0x20: [mem 0xdff2c000-0xdff2ffff 64bit]
[    0.195415] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.195527] pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000
[    0.195554] pci 0000:00:14.1: reg 0x10: [mem 0xdfe40000-0xdfe5ffff 64bit]
[    0.195564] pci 0000:00:14.1: reg 0x18: [io  0xe0a0-0xe0bf]
[    0.195582] pci 0000:00:14.1: reg 0x20: [mem 0xdff28000-0xdff2bfff 64bit]
[    0.195617] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.195732] pci 0000:00:14.2: [8086:1f41] type 00 class 0x020000
[    0.195759] pci 0000:00:14.2: reg 0x10: [mem 0xdfe20000-0xdfe3ffff 64bit]
[    0.195768] pci 0000:00:14.2: reg 0x18: [io  0xe080-0xe09f]
[    0.195787] pci 0000:00:14.2: reg 0x20: [mem 0xdff24000-0xdff27fff 64bit]
[    0.195822] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.195935] pci 0000:00:14.3: [8086:1f41] type 00 class 0x020000
[    0.195963] pci 0000:00:14.3: reg 0x10: [mem 0xdfe00000-0xdfe1ffff 64bit]
[    0.195972] pci 0000:00:14.3: reg 0x18: [io  0xe060-0xe07f]
[    0.195991] pci 0000:00:14.3: reg 0x20: [mem 0xdff20000-0xdff23fff 64bit]
[    0.196026] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.196145] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320
[    0.196182] pci 0000:00:16.0: reg 0x10: [mem 0xdff37000-0xdff373ff]
[    0.196278] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.196394] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601
[    0.196419] pci 0000:00:17.0: reg 0x10: [io  0xe150-0xe157]
[    0.196429] pci 0000:00:17.0: reg 0x14: [io  0xe140-0xe143]
[    0.196438] pci 0000:00:17.0: reg 0x18: [io  0xe130-0xe137]
[    0.196447] pci 0000:00:17.0: reg 0x1c: [io  0xe120-0xe123]
[    0.196457] pci 0000:00:17.0: reg 0x20: [io  0xe040-0xe05f]
[    0.196466] pci 0000:00:17.0: reg 0x24: [mem 0xdff36000-0xdff367ff]
[    0.196500] pci 0000:00:17.0: PME# supported from D3hot
[    0.196611] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601
[    0.196636] pci 0000:00:18.0: reg 0x10: [io  0xe110-0xe117]
[    0.196646] pci 0000:00:18.0: reg 0x14: [io  0xe100-0xe103]
[    0.196655] pci 0000:00:18.0: reg 0x18: [io  0xe0f0-0xe0f7]
[    0.196664] pci 0000:00:18.0: reg 0x1c: [io  0xe0e0-0xe0e3]
[    0.196673] pci 0000:00:18.0: reg 0x20: [io  0xe020-0xe03f]
[    0.196683] pci 0000:00:18.0: reg 0x24: [mem 0xdff35000-0xdff357ff]
[    0.196717] pci 0000:00:18.0: PME# supported from D3hot
[    0.196834] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100
[    0.197015] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500
[    0.197036] pci 0000:00:1f.3: reg 0x10: [mem 0xdff34000-0xdff3401f]
[    0.197069] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
[    0.197248] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.197318] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601
[    0.197345] pci 0000:02:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.197357] pci 0000:02:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.197367] pci 0000:02:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.197384] pci 0000:02:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.197395] pci 0000:02:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.197407] pci 0000:02:00.0: reg 0x24: [mem 0xdfd10000-0xdfd101ff]
[    0.197418] pci 0000:02:00.0: reg 0x30: [mem 0xdfd00000-0xdfd0ffff pref]
[    0.197455] pci 0000:02:00.0: PME# supported from D3hot
[    0.199404] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.199410] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.199415] pci 0000:00:02.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.199487] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.199528] pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc07fff 64bit]
[    0.199631] pci 0000:03:00.0: PME# supported from D3cold
[    0.201408] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.201416] pci 0000:00:03.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.201486] pci 0000:04:00.0: [1b4b:9170] type 00 class 0x010601
[    0.201513] pci 0000:04:00.0: reg 0x10: [io  0xc040-0xc047]
[    0.201524] pci 0000:04:00.0: reg 0x14: [io  0xc030-0xc033]
[    0.201535] pci 0000:04:00.0: reg 0x18: [io  0xc020-0xc027]
[    0.201546] pci 0000:04:00.0: reg 0x1c: [io  0xc010-0xc013]
[    0.201557] pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc00f]
[    0.201568] pci 0000:04:00.0: reg 0x24: [mem 0xdfb10000-0xdfb101ff]
[    0.201579] pci 0000:04:00.0: reg 0x30: [mem 0xdfb00000-0xdfb0ffff pref]
[    0.201616] pci 0000:04:00.0: PME# supported from D3hot
[    0.203412] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.203417] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.203422] pci 0000:00:04.0:   bridge window [mem 0xdfb00000-0xdfbfffff]
[    0.203450] pci_bus 0000:00: on NUMA node 0
[    0.203616] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12)
[    0.203722] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 10 11 12) *0, disabled.
[    0.203827] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12)
[    0.203932] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12)
[    0.204035] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12)
[    0.204138] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12)
[    0.204242] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12)
[    0.204345] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12)
[    0.204734] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.204927] SCSI subsystem initialized
[    0.204959] libata version 3.00 loaded.
[    0.204968] ACPI: bus type USB registered
[    0.205015] usbcore: registered new interface driver usbfs
[    0.205037] usbcore: registered new interface driver hub
[    0.205064] usbcore: registered new device driver usb
[    0.205117] pps_core: LinuxPPS API ver. 1 registered
[    0.205120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.205129] PTP clock support registered
[    0.205260] Advanced Linux Sound Architecture Driver Initialized.
[    0.205282] PCI: Using ACPI for IRQ routing
[    0.205285] PCI: pci_cache_line_size set to 64 bytes
[    0.205343] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    0.205346] e820: reserve RAM buffer [mem 0x7d8f8000-0x7fffffff]
[    0.205349] e820: reserve RAM buffer [mem 0x7e619000-0x7fffffff]
[    0.205351] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[    0.205549] Bluetooth: Core ver 2.21
[    0.205565] NET: Registered protocol family 31
[    0.205567] Bluetooth: HCI device and connection manager initialized
[    0.205572] Bluetooth: HCI socket layer initialized
[    0.205575] Bluetooth: L2CAP socket layer initialized
[    0.205583] Bluetooth: SCO socket layer initialized
[    0.205759] clocksource: Switched to clocksource refined-jiffies
[    0.205864] FS-Cache: Loaded
[    0.205932] pnp: PnP ACPI init
[    0.206287] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.206291] system 00:00: [mem 0x7f800000-0x7fffffff] could not be reserved
[    0.206298] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.206389] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.206393] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.206397] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.206401] system 00:01: [mem 0xfed00000-0xfedfffff] could not be reserved
[    0.206405] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
[    0.206417] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.206422] system 00:01: [mem 0xffa00000-0xffffffff] has been reserved
[    0.206425] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.206430] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206479] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.206557] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.206629] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.206962] system 00:05: [io  0x0a00-0x0a1f] has been reserved
[    0.206967] system 00:05: [io  0x0a20-0x0a2f] has been reserved
[    0.206970] system 00:05: [io  0x0a30-0x0a3f] has been reserved
[    0.206974] system 00:05: [io  0x0a40-0x0a4f] has been reserved
[    0.206977] system 00:05: [io  0x0a50-0x0a5f] has been reserved
[    0.206982] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207114] pnp: PnP ACPI: found 6 devices
[    0.214782] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.214810] clocksource: Switched to clocksource acpi_pm
[    0.214832] pci 0000:00:01.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.214838] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.214843] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.214854] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.214864] pci 0000:00:03.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.214868] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.214879] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.214889] pci 0000:00:01.0: res[8]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.214893] pci 0000:00:01.0: res[8]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.214897] pci 0000:00:01.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214901] pci 0000:00:01.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214905] pci 0000:00:02.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214908] pci 0000:00:02.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214912] pci 0000:00:03.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214916] pci 0000:00:03.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214920] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214924] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.214928] pci 0000:00:01.0: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.214931] pci 0000:00:01.0: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.214935] pci 0000:00:03.0: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.214939] pci 0000:00:03.0: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.214946] pci 0000:00:01.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.214953] pci 0000:00:01.0: BAR 9: assigned [mem 0x180000000-0x1801fffff 64bit pref]
[    0.214959] pci 0000:00:02.0: BAR 9: assigned [mem 0x180200000-0x1803fffff 64bit pref]
[    0.214965] pci 0000:00:03.0: BAR 9: assigned [mem 0x180400000-0x1805fffff 64bit pref]
[    0.214971] pci 0000:00:04.0: BAR 9: assigned [mem 0x180600000-0x1807fffff 64bit pref]
[    0.214976] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.214980] pci 0000:00:03.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.214985] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.214989] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.214996] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.215002] pci 0000:00:01.0:   bridge window [mem 0x180000000-0x1801fffff 64bit pref]
[    0.215011] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.215015] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.215021] pci 0000:00:02.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.215027] pci 0000:00:02.0:   bridge window [mem 0x180200000-0x1803fffff 64bit pref]
[    0.215035] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.215039] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.215045] pci 0000:00:03.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.215051] pci 0000:00:03.0:   bridge window [mem 0x180400000-0x1805fffff 64bit pref]
[    0.215059] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.215063] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.215069] pci 0000:00:04.0:   bridge window [mem 0xdfb00000-0xdfbfffff]
[    0.215075] pci 0000:00:04.0:   bridge window [mem 0x180600000-0x1807fffff 64bit pref]
[    0.215086] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.215089] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.215092] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.215096] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.215099] pci_bus 0000:00: resource 8 [mem 0x180000000-0xfffffffff window]
[    0.215103] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.215106] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.215109] pci_bus 0000:01: resource 2 [mem 0x180000000-0x1801fffff 64bit pref]
[    0.215113] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.215116] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.215119] pci_bus 0000:02: resource 2 [mem 0x180200000-0x1803fffff 64bit pref]
[    0.215122] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.215126] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.215129] pci_bus 0000:03: resource 2 [mem 0x180400000-0x1805fffff 64bit pref]
[    0.215132] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.215136] pci_bus 0000:04: resource 1 [mem 0xdfb00000-0xdfbfffff]
[    0.215139] pci_bus 0000:04: resource 2 [mem 0x180600000-0x1807fffff 64bit pref]
[    0.215179] NET: Registered protocol family 2
[    0.215383] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.215482] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.215619] TCP: Hash tables configured (established 32768 bind 32768)
[    0.215675] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.215703] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.215838] NET: Registered protocol family 1
[    0.215970] RPC: Registered named UNIX socket transport module.
[    0.215973] RPC: Registered udp transport module.
[    0.215976] RPC: Registered tcp transport module.
[    0.215977] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.227111] PCI: CLS 64 bytes, default 64
[    0.227200] Unpacking initramfs...
[    1.099633] Freeing initrd memory: 4212K
[    1.099649] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.099653] software IO TLB [mem 0x794db000-0x7d4db000] (64MB) mapped at [ffff8800794db000-ffff88007d4dafff]
[    1.130320] VFS: Disk quotas dquot_6.6.0
[    1.130399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.133838] NFS: Registering the id_resolver key type
[    1.133859] Key type id_resolver registered
[    1.133862] Key type id_legacy registered
[    1.133869] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.134328] Key type cifs.spnego registered
[    1.134342] Key type cifs.idmap registered
[    1.134437] fuse init (API version 7.23)
[    1.140870] NET: Registered protocol family 38
[    1.140883] async_tx: api initialized (async)
[    1.140978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.141035] io scheduler noop registered
[    1.141039] io scheduler deadline registered
[    1.141100] io scheduler cfq registered (default)
[    1.141200] io scheduler bfq registered
[    1.141203] BFQ I/O-scheduler: v7r11
[    1.141717] gpio_it87: Found Chip IT8732 rev 2. 64 GPIO lines starting at 0a10h
[    1.142397] pcieport 0000:00:04.0: can't derive routing for PCI INT A
[    1.142402] pcieport 0000:00:04.0: PCI INT A: no GSI
[    1.142496] intel_idle: MWAIT substates: 0x3000020
[    1.142500] intel_idle: v0.4.1 model 0x4D
[    1.142502] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.142743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.142750] ACPI: Power Button [PWRF]
[    1.145712] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    1.145930] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.166273] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.186675] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.187205] Linux agpgart interface v0.103
[    1.187255] [drm] Initialized drm 1.1.0 20060810
[    1.197756] loop: module loaded
[    1.198170] gpio_ich: GPIO from 388 to 447 on gpio_ich
[    1.198314] mpt3sas version 12.100.00.00 loaded
[    1.198644] ahci 0000:00:17.0: version 3.0
[    1.209834] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.209845] ahci 0000:00:17.0: flags: 64bit ncq led clo pio deso sadm sds apst 
[    1.209903] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.209952] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.209988] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.210028] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.216032] scsi host0: ahci
[    1.216277] scsi host1: ahci
[    1.216413] scsi host2: ahci
[    1.219780] scsi host3: ahci
[    1.219888] ata1: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36100 irq 88
[    1.219893] ata2: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36180 irq 88
[    1.219896] ata3: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36200 irq 88
[    1.219899] ata4: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36280 irq 88
[    1.230873] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.230880] ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sadm sds apst 
[    1.230924] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.230959] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.232615] scsi host4: ahci
[    1.234858] scsi host5: ahci
[    1.234959] ata5: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 89
[    1.234963] ata6: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 89
[    1.235193] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.235198] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.235241] ReadyNAS model: ReadyNAS 3138
[    1.235246] do_marvell_9170_recover: start_engine() called for PCI#2 port 0
[    1.235248] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.235251] marvell_9170_save_pci_dev: pci[4]=100407
[    1.235254] marvell_9170_save_pci_dev: pci[c]=10
[    1.235257] marvell_9170_save_pci_dev: pci[10]=d041
[    1.235260] marvell_9170_save_pci_dev: pci[14]=d031
[    1.235263] marvell_9170_save_pci_dev: pci[18]=d021
[    1.235266] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.235269] marvell_9170_save_pci_dev: pci[20]=d001
[    1.235273] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.235276] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.235279] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.235282] marvell_9170_save_pci_dev: pci[44]=0
[    1.235285] marvell_9170_save_pci_dev: pci[50]=17005
[    1.235288] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.235291] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.235294] marvell_9170_save_pci_dev: pci[78]=92027
[    1.235297] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.235300] marvell_9170_save_pci_dev: pci[a0]=2
[    1.235302] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.235305] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.235307] marvell_9170_save_pci_dev: dev[104]=0
[    1.235310] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.235313] marvell_9170_save_pci_dev: dev[10c]=0
[    1.235315] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.235317] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.235319] marvell_9170_save_pci_dev: dev[118]=710011
[    1.235321] marvell_9170_save_pci_dev: dev[180]=98500
[    1.235324] marvell_9170_save_pci_dev: dev[184]=0
[    1.235327] marvell_9170_save_pci_dev: dev[188]=98540
[    1.235329] marvell_9170_save_pci_dev: dev[18c]=0
[    1.235331] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.235333] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.235335] marvell_9170_save_pci_dev: dev[198]=710011
[    1.235377] do_marvell_9170_recover: start_engine() called for PCI#2 port 1
[    1.235379] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.235382] marvell_9170_save_pci_dev: pci[4]=100407
[    1.235385] marvell_9170_save_pci_dev: pci[c]=10
[    1.235388] marvell_9170_save_pci_dev: pci[10]=d041
[    1.235391] marvell_9170_save_pci_dev: pci[14]=d031
[    1.235395] marvell_9170_save_pci_dev: pci[18]=d021
[    1.235398] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.235401] marvell_9170_save_pci_dev: pci[20]=d001
[    1.235404] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.235407] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.235410] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.235413] marvell_9170_save_pci_dev: pci[44]=0
[    1.235416] marvell_9170_save_pci_dev: pci[50]=17005
[    1.235419] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.235422] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.235425] marvell_9170_save_pci_dev: pci[78]=92027
[    1.235428] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.235431] marvell_9170_save_pci_dev: pci[a0]=2
[    1.235433] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.235436] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.235438] marvell_9170_save_pci_dev: dev[104]=0
[    1.235441] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.235444] marvell_9170_save_pci_dev: dev[10c]=0
[    1.235446] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.235448] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.235450] marvell_9170_save_pci_dev: dev[118]=710011
[    1.235452] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.235455] marvell_9170_save_pci_dev: dev[184]=1
[    1.235458] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.235460] marvell_9170_save_pci_dev: dev[18c]=1
[    1.235462] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.235464] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.235466] marvell_9170_save_pci_dev: dev[198]=710011
[    1.235859] scsi host6: ahci
[    1.236083] scsi host7: ahci
[    1.236164] ata7: SATA max UDMA/133 abar m512@0xdfd10000 port 0xdfd10100 irq 90
[    1.236169] ata8: SATA max UDMA/133 abar m512@0xdfd10000 port 0xdfd10180 irq 90
[    1.236286] do_marvell_9170_recover: still booting
[    1.236409] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.236416] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.236471] do_marvell_9170_recover: start_engine() called for PCI#4 port 0
[    1.236473] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.236477] marvell_9170_save_pci_dev: pci[4]=100407
[    1.236480] marvell_9170_save_pci_dev: pci[c]=10
[    1.236483] marvell_9170_save_pci_dev: pci[10]=d041
[    1.236486] marvell_9170_save_pci_dev: pci[14]=d031
[    1.236490] marvell_9170_save_pci_dev: pci[18]=d021
[    1.236493] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.236496] marvell_9170_save_pci_dev: pci[20]=d001
[    1.236499] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.236502] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.236505] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.236508] marvell_9170_save_pci_dev: pci[44]=0
[    1.236511] marvell_9170_save_pci_dev: pci[50]=17005
[    1.236514] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.236517] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.236520] marvell_9170_save_pci_dev: pci[78]=92027
[    1.236523] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.236526] marvell_9170_save_pci_dev: pci[a0]=2
[    1.236528] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.236531] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.236534] marvell_9170_save_pci_dev: dev[104]=0
[    1.236536] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.236539] marvell_9170_save_pci_dev: dev[10c]=0
[    1.236541] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.236543] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.236545] marvell_9170_save_pci_dev: dev[118]=710011
[    1.236548] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.236550] marvell_9170_save_pci_dev: dev[184]=1
[    1.236553] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.236556] marvell_9170_save_pci_dev: dev[18c]=1
[    1.236558] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.236560] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.236562] marvell_9170_save_pci_dev: dev[198]=710011
[    1.236563] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.236566] marvell_9170_save_pci_dev: pci[4]=100407
[    1.236569] marvell_9170_save_pci_dev: pci[c]=10
[    1.236572] marvell_9170_save_pci_dev: pci[10]=c041
[    1.236575] marvell_9170_save_pci_dev: pci[14]=c031
[    1.236578] marvell_9170_save_pci_dev: pci[18]=c021
[    1.236581] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.236584] marvell_9170_save_pci_dev: pci[20]=c001
[    1.236587] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.236591] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.236594] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.236597] marvell_9170_save_pci_dev: pci[44]=0
[    1.236600] marvell_9170_save_pci_dev: pci[50]=17005
[    1.236603] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.236606] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.236609] marvell_9170_save_pci_dev: pci[78]=92027
[    1.236612] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.236615] marvell_9170_save_pci_dev: pci[a0]=2
[    1.236617] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.236619] marvell_9170_save_pci_dev: dev[100]=7a920000
[    1.236622] marvell_9170_save_pci_dev: dev[104]=1
[    1.236625] marvell_9170_save_pci_dev: dev[108]=7a920400
[    1.236628] marvell_9170_save_pci_dev: dev[10c]=1
[    1.236630] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.236631] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.236633] marvell_9170_save_pci_dev: dev[118]=710011
[    1.236636] marvell_9170_save_pci_dev: dev[180]=98500
[    1.236639] marvell_9170_save_pci_dev: dev[184]=0
[    1.236642] marvell_9170_save_pci_dev: dev[188]=98540
[    1.236644] marvell_9170_save_pci_dev: dev[18c]=0
[    1.236646] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.236648] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.236650] marvell_9170_save_pci_dev: dev[198]=710011
[    1.236694] do_marvell_9170_recover: start_engine() called for PCI#4 port 1
[    1.236696] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.236699] marvell_9170_save_pci_dev: pci[4]=100407
[    1.236703] marvell_9170_save_pci_dev: pci[c]=10
[    1.236706] marvell_9170_save_pci_dev: pci[10]=d041
[    1.236709] marvell_9170_save_pci_dev: pci[14]=d031
[    1.236712] marvell_9170_save_pci_dev: pci[18]=d021
[    1.236715] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.236718] marvell_9170_save_pci_dev: pci[20]=d001
[    1.236721] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.236724] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.236727] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.236730] marvell_9170_save_pci_dev: pci[44]=0
[    1.236733] marvell_9170_save_pci_dev: pci[50]=17005
[    1.236736] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.236739] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.236742] marvell_9170_save_pci_dev: pci[78]=92027
[    1.236745] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.236748] marvell_9170_save_pci_dev: pci[a0]=2
[    1.236750] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.236753] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.236756] marvell_9170_save_pci_dev: dev[104]=0
[    1.236758] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.236761] marvell_9170_save_pci_dev: dev[10c]=0
[    1.236763] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.236765] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.236767] marvell_9170_save_pci_dev: dev[118]=710011
[    1.236770] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.236772] marvell_9170_save_pci_dev: dev[184]=1
[    1.236775] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.236778] marvell_9170_save_pci_dev: dev[18c]=1
[    1.236780] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.236807] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.236810] marvell_9170_save_pci_dev: dev[198]=710011
[    1.236812] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.236815] marvell_9170_save_pci_dev: pci[4]=100407
[    1.236818] marvell_9170_save_pci_dev: pci[c]=10
[    1.236821] marvell_9170_save_pci_dev: pci[10]=c041
[    1.236824] marvell_9170_save_pci_dev: pci[14]=c031
[    1.236827] marvell_9170_save_pci_dev: pci[18]=c021
[    1.236830] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.236833] marvell_9170_save_pci_dev: pci[20]=c001
[    1.236836] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.236839] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.236842] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.236845] marvell_9170_save_pci_dev: pci[44]=0
[    1.236848] marvell_9170_save_pci_dev: pci[50]=17005
[    1.236852] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.236855] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.236858] marvell_9170_save_pci_dev: pci[78]=92027
[    1.236861] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.236864] marvell_9170_save_pci_dev: pci[a0]=2
[    1.236866] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.236869] marvell_9170_save_pci_dev: dev[100]=7a920000
[    1.236872] marvell_9170_save_pci_dev: dev[104]=1
[    1.236874] marvell_9170_save_pci_dev: dev[108]=7a920400
[    1.236877] marvell_9170_save_pci_dev: dev[10c]=1
[    1.236879] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.236881] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.236883] marvell_9170_save_pci_dev: dev[118]=710011
[    1.236886] marvell_9170_save_pci_dev: dev[180]=7a9c0000
[    1.236888] marvell_9170_save_pci_dev: dev[184]=1
[    1.236891] marvell_9170_save_pci_dev: dev[188]=7a9c0400
[    1.236894] marvell_9170_save_pci_dev: dev[18c]=1
[    1.236896] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.236898] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.236900] marvell_9170_save_pci_dev: dev[198]=710011
[    1.237195] do_marvell_9170_recover: still booting
[    1.238719] scsi host8: ahci
[    1.240127] scsi host9: ahci
[    1.240236] ata9: SATA max UDMA/133 abar m512@0xdfb10000 port 0xdfb10100 irq 91
[    1.240240] ata10: SATA max UDMA/133 abar m512@0xdfb10000 port 0xdfb10180 irq 91
[    1.240562] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    1.240712] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.240739] tun: Universal TUN/TAP device driver, 1.6
[    1.240741] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.240868] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.240871] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.240908] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.240910] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.240938] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    1.240940] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.526851] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.526863] ata3: SATA link down (SStatus 0 SControl 300)
[    1.526879] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.526888] ata4: SATA link down (SStatus 0 SControl 300)
[    1.527831] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.527839] ata2: SATA link down (SStatus 0 SControl 300)
[    1.527853] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.527861] ata1: SATA link down (SStatus 0 SControl 300)
[    1.540837] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.540839] do_marvell_9170_recover: start_engine() called for PCI#2 port 1
[    1.540843] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.540847] marvell_9170_save_pci_dev: pci[4]=100407
[    1.540851] marvell_9170_save_pci_dev: pci[c]=10
[    1.540855] ata6: SATA link down (SStatus 0 SControl 300)
[    1.540859] marvell_9170_save_pci_dev: pci[10]=d041
[    1.540862] marvell_9170_save_pci_dev: pci[14]=d031
[    1.540865] marvell_9170_save_pci_dev: pci[18]=d021
[    1.540868] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.540871] marvell_9170_save_pci_dev: pci[20]=d001
[    1.540874] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.540877] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.540880] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.540883] marvell_9170_save_pci_dev: pci[44]=0
[    1.540886] marvell_9170_save_pci_dev: pci[50]=17005
[    1.540889] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.540892] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.540895] marvell_9170_save_pci_dev: pci[78]=92027
[    1.540899] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.540902] marvell_9170_save_pci_dev: pci[a0]=2
[    1.540904] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.540906] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.540909] marvell_9170_save_pci_dev: dev[104]=0
[    1.540912] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.540915] marvell_9170_save_pci_dev: dev[10c]=0
[    1.540917] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.540919] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.540920] marvell_9170_save_pci_dev: dev[118]=710011
[    1.540923] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.540926] marvell_9170_save_pci_dev: dev[184]=1
[    1.540929] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.540931] marvell_9170_save_pci_dev: dev[18c]=1
[    1.540933] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.540935] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.540937] marvell_9170_save_pci_dev: dev[198]=710011
[    1.540939] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.540942] marvell_9170_save_pci_dev: pci[4]=100407
[    1.540945] marvell_9170_save_pci_dev: pci[c]=10
[    1.540948] marvell_9170_save_pci_dev: pci[10]=c041
[    1.540951] marvell_9170_save_pci_dev: pci[14]=c031
[    1.540954] marvell_9170_save_pci_dev: pci[18]=c021
[    1.540957] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.540960] marvell_9170_save_pci_dev: pci[20]=c001
[    1.540964] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.540967] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.540970] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.540973] marvell_9170_save_pci_dev: pci[44]=0
[    1.540976] marvell_9170_save_pci_dev: pci[50]=17005
[    1.540979] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.540982] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.540985] marvell_9170_save_pci_dev: pci[78]=92027
[    1.540988] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.540991] marvell_9170_save_pci_dev: pci[a0]=2
[    1.540993] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.540996] marvell_9170_save_pci_dev: dev[100]=7a920000
[    1.540998] marvell_9170_save_pci_dev: dev[104]=1
[    1.541001] marvell_9170_save_pci_dev: dev[108]=7a920400
[    1.541004] marvell_9170_save_pci_dev: dev[10c]=1
[    1.541006] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.541008] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.541009] marvell_9170_save_pci_dev: dev[118]=710011
[    1.541012] marvell_9170_save_pci_dev: dev[180]=7a9c0000
[    1.541015] marvell_9170_save_pci_dev: dev[184]=1
[    1.541018] marvell_9170_save_pci_dev: dev[188]=7a9c0400
[    1.541020] marvell_9170_save_pci_dev: dev[18c]=1
[    1.541022] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.541024] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.541026] marvell_9170_save_pci_dev: dev[198]=710011
[    1.541036] ata8: SATA link down (SStatus 0 SControl 300)
[    1.541839] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.541841] do_marvell_9170_recover: start_engine() called for PCI#2 port 0
[    1.541844] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.541848] marvell_9170_save_pci_dev: pci[4]=100407
[    1.541853] marvell_9170_save_pci_dev: pci[c]=10
[    1.541854] ata5: SATA link down (SStatus 0 SControl 300)
[    1.541859] marvell_9170_save_pci_dev: pci[10]=d041
[    1.541862] marvell_9170_save_pci_dev: pci[14]=d031
[    1.541865] marvell_9170_save_pci_dev: pci[18]=d021
[    1.541868] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.541871] marvell_9170_save_pci_dev: pci[20]=d001
[    1.541874] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.541877] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.541880] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.541884] marvell_9170_save_pci_dev: pci[44]=0
[    1.541887] marvell_9170_save_pci_dev: pci[50]=17005
[    1.541890] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.541893] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.541896] marvell_9170_save_pci_dev: pci[78]=92027
[    1.541899] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.541902] marvell_9170_save_pci_dev: pci[a0]=2
[    1.541904] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.541907] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.541910] marvell_9170_save_pci_dev: dev[104]=0
[    1.541912] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.541915] marvell_9170_save_pci_dev: dev[10c]=0
[    1.541917] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.541919] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.541921] marvell_9170_save_pci_dev: dev[118]=710011
[    1.541924] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.541926] marvell_9170_save_pci_dev: dev[184]=1
[    1.541929] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.541932] marvell_9170_save_pci_dev: dev[18c]=1
[    1.541934] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.541936] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.541938] marvell_9170_save_pci_dev: dev[198]=710011
[    1.541940] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.541943] marvell_9170_save_pci_dev: pci[4]=100407
[    1.541946] marvell_9170_save_pci_dev: pci[c]=10
[    1.541949] marvell_9170_save_pci_dev: pci[10]=c041
[    1.541952] marvell_9170_save_pci_dev: pci[14]=c031
[    1.541955] marvell_9170_save_pci_dev: pci[18]=c021
[    1.541958] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.541961] marvell_9170_save_pci_dev: pci[20]=c001
[    1.541964] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.541967] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.541970] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.541973] marvell_9170_save_pci_dev: pci[44]=0
[    1.541976] marvell_9170_save_pci_dev: pci[50]=17005
[    1.541979] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.541982] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.541985] marvell_9170_save_pci_dev: pci[78]=92027
[    1.541988] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.541991] marvell_9170_save_pci_dev: pci[a0]=2
[    1.541993] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.541996] marvell_9170_save_pci_dev: dev[100]=7a920000
[    1.541999] marvell_9170_save_pci_dev: dev[104]=1
[    1.542002] marvell_9170_save_pci_dev: dev[108]=7a920400
[    1.542004] marvell_9170_save_pci_dev: dev[10c]=1
[    1.542006] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.542008] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.542010] marvell_9170_save_pci_dev: dev[118]=710011
[    1.542013] marvell_9170_save_pci_dev: dev[180]=7a9c0000
[    1.542016] marvell_9170_save_pci_dev: dev[184]=1
[    1.542018] marvell_9170_save_pci_dev: dev[188]=7a9c0400
[    1.542021] marvell_9170_save_pci_dev: dev[18c]=1
[    1.542023] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.542025] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.542027] marvell_9170_save_pci_dev: dev[198]=710011
[    1.542037] ata7: SATA link down (SStatus 0 SControl 300)
[    1.544826] do_marvell_9170_recover: start_engine() called for PCI#4 port 0
[    1.544829] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.544833] marvell_9170_save_pci_dev: pci[4]=100407
[    1.544837] marvell_9170_save_pci_dev: pci[c]=10
[    1.544840] marvell_9170_save_pci_dev: pci[10]=d041
[    1.544843] marvell_9170_save_pci_dev: pci[14]=d031
[    1.544846] marvell_9170_save_pci_dev: pci[18]=d021
[    1.544849] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.544852] marvell_9170_save_pci_dev: pci[20]=d001
[    1.544855] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.544858] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.544862] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.544865] marvell_9170_save_pci_dev: pci[44]=0
[    1.544868] marvell_9170_save_pci_dev: pci[50]=17005
[    1.544871] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.544874] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.544877] marvell_9170_save_pci_dev: pci[78]=92027
[    1.544880] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.544883] marvell_9170_save_pci_dev: pci[a0]=2
[    1.544885] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.544888] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.544891] marvell_9170_save_pci_dev: dev[104]=0
[    1.544894] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.544896] marvell_9170_save_pci_dev: dev[10c]=0
[    1.544898] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.544900] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.544902] marvell_9170_save_pci_dev: dev[118]=710011
[    1.544905] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.544908] marvell_9170_save_pci_dev: dev[184]=1
[    1.544911] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.544913] marvell_9170_save_pci_dev: dev[18c]=1
[    1.544915] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.544917] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.544919] marvell_9170_save_pci_dev: dev[198]=710011
[    1.544921] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.544924] marvell_9170_save_pci_dev: pci[4]=100407
[    1.544927] marvell_9170_save_pci_dev: pci[c]=10
[    1.544930] marvell_9170_save_pci_dev: pci[10]=c041
[    1.544933] marvell_9170_save_pci_dev: pci[14]=c031
[    1.544936] marvell_9170_save_pci_dev: pci[18]=c021
[    1.544939] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.544942] marvell_9170_save_pci_dev: pci[20]=c001
[    1.544945] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.544948] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.544951] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.544954] marvell_9170_save_pci_dev: pci[44]=0
[    1.544957] marvell_9170_save_pci_dev: pci[50]=17005
[    1.544960] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.544963] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.544966] marvell_9170_save_pci_dev: pci[78]=92027
[    1.544969] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.544972] marvell_9170_save_pci_dev: pci[a0]=2
[    1.544974] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.544977] marvell_9170_save_pci_dev: dev[100]=7a920000
[    1.544980] marvell_9170_save_pci_dev: dev[104]=1
[    1.544983] marvell_9170_save_pci_dev: dev[108]=7a920400
[    1.544985] marvell_9170_save_pci_dev: dev[10c]=1
[    1.544987] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.544989] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.544991] marvell_9170_save_pci_dev: dev[118]=710011
[    1.544994] marvell_9170_save_pci_dev: dev[180]=7a9c0000
[    1.544997] marvell_9170_save_pci_dev: dev[184]=1
[    1.544999] marvell_9170_save_pci_dev: dev[188]=7a9c0400
[    1.545002] marvell_9170_save_pci_dev: dev[18c]=1
[    1.545004] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.545006] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.545008] marvell_9170_save_pci_dev: dev[198]=710011
[    1.545018] ata9: SATA link down (SStatus 0 SControl 300)
[    1.545036] do_marvell_9170_recover: start_engine() called for PCI#4 port 1
[    1.545040] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.545044] marvell_9170_save_pci_dev: pci[4]=100407
[    1.545047] marvell_9170_save_pci_dev: pci[c]=10
[    1.545050] marvell_9170_save_pci_dev: pci[10]=d041
[    1.545053] marvell_9170_save_pci_dev: pci[14]=d031
[    1.545056] marvell_9170_save_pci_dev: pci[18]=d021
[    1.545059] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.545062] marvell_9170_save_pci_dev: pci[20]=d001
[    1.545065] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.545068] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.545072] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.545075] marvell_9170_save_pci_dev: pci[44]=0
[    1.545078] marvell_9170_save_pci_dev: pci[50]=17005
[    1.545081] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.545084] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.545087] marvell_9170_save_pci_dev: pci[78]=92027
[    1.545090] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.545093] marvell_9170_save_pci_dev: pci[a0]=2
[    1.545095] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.545098] marvell_9170_save_pci_dev: dev[100]=76c60000
[    1.545101] marvell_9170_save_pci_dev: dev[104]=0
[    1.545103] marvell_9170_save_pci_dev: dev[108]=76c60400
[    1.545106] marvell_9170_save_pci_dev: dev[10c]=0
[    1.545108] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.545110] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.545112] marvell_9170_save_pci_dev: dev[118]=710011
[    1.545115] marvell_9170_save_pci_dev: dev[180]=7a900000
[    1.545118] marvell_9170_save_pci_dev: dev[184]=1
[    1.545120] marvell_9170_save_pci_dev: dev[188]=7a900400
[    1.545123] marvell_9170_save_pci_dev: dev[18c]=1
[    1.545125] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.545127] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.545129] marvell_9170_save_pci_dev: dev[198]=710011
[    1.545131] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.545134] marvell_9170_save_pci_dev: pci[4]=100407
[    1.545137] marvell_9170_save_pci_dev: pci[c]=10
[    1.545140] marvell_9170_save_pci_dev: pci[10]=c041
[    1.545143] marvell_9170_save_pci_dev: pci[14]=c031
[    1.545146] marvell_9170_save_pci_dev: pci[18]=c021
[    1.545149] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.545152] marvell_9170_save_pci_dev: pci[20]=c001
[    1.545155] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.545158] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.545161] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.545164] marvell_9170_save_pci_dev: pci[44]=0
[    1.545167] marvell_9170_save_pci_dev: pci[50]=17005
[    1.545170] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.545173] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.545176] marvell_9170_save_pci_dev: pci[78]=92027
[    1.545179] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.545182] marvell_9170_save_pci_dev: pci[a0]=2
[    1.545184] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.545187] marvell_9170_save_pci_dev: dev[100]=7a920000
[    1.545190] marvell_9170_save_pci_dev: dev[104]=1
[    1.545192] marvell_9170_save_pci_dev: dev[108]=7a920400
[    1.545195] marvell_9170_save_pci_dev: dev[10c]=1
[    1.545197] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.545199] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.545201] marvell_9170_save_pci_dev: dev[118]=710011
[    1.545204] marvell_9170_save_pci_dev: dev[180]=7a9c0000
[    1.545206] marvell_9170_save_pci_dev: dev[184]=1
[    1.545209] marvell_9170_save_pci_dev: dev[188]=7a9c0400
[    1.545212] marvell_9170_save_pci_dev: dev[18c]=1
[    1.545214] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.545216] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.545218] marvell_9170_save_pci_dev: dev[198]=710011
[    1.545228] ata10: SATA link down (SStatus 0 SControl 300)
[    1.582623] igb 0000:00:14.0: added PHC on eth0
[    1.582628] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
[    1.582702] igb 0000:00:14.0: eth0: PBA No: 002100-000
[    1.582706] igb 0000:00:14.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    1.925605] igb 0000:00:14.1: added PHC on eth1
[    1.925611] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
[    1.925685] igb 0000:00:14.1: eth1: PBA No: 002100-000
[    1.925688] igb 0000:00:14.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.102824] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[    2.102831] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
[    2.268641] igb 0000:00:14.2: added PHC on eth2
[    2.268647] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection
[    2.268722] igb 0000:00:14.2: eth2: PBA No: 002100-000
[    2.268725] igb 0000:00:14.2: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.611614] igb 0000:00:14.3: added PHC on eth3
[    2.611619] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection
[    2.611694] igb 0000:00:14.3: eth3: PBA No: 002100-000
[    2.611697] igb 0000:00:14.3: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.612541] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.3.3
[    2.612545] Copyright(c) 1999 - 2017 Intel Corporation.
[    2.612743] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.3.6
[    2.612748] i40e: Copyright(c) 2013 - 2017 Intel Corporation.
[    2.616359] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[    2.616571] Fusion MPT base driver 3.04.20
[    2.616574] Copyright (c) 1999-2008 LSI Corporation
[    2.616586] Fusion MPT SAS Host driver 3.04.20
[    2.616621] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.616689] mptctl: Registered with Fusion MPT base driver
[    2.616692] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.616698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.616706] ehci-pci: EHCI PCI platform driver
[    2.616880] ehci-pci 0000:00:16.0: EHCI Host Controller
[    2.616892] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1
[    2.616908] ehci-pci 0000:00:16.0: debug port 2
[    2.620811] ehci-pci 0000:00:16.0: cache line size of 64 is not supported
[    2.620837] ehci-pci 0000:00:16.0: irq 23, io mem 0xdff37000
[    2.627814] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00
[    2.628219] hub 1-0:1.0: USB hub found
[    2.628235] hub 1-0:1.0: 8 ports detected
[    2.628649] uhci_hcd: USB Universal Host Controller Interface driver
[    2.628824] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.628834] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.689361] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000410
[    2.689857] hub 2-0:1.0: USB hub found
[    2.689874] hub 2-0:1.0: 2 ports detected
[    2.690042] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.690049] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    2.690125] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.690362] hub 3-0:1.0: USB hub found
[    2.690383] hub 3-0:1.0: 2 ports detected
[    2.690613] usbcore: registered new interface driver cdc_acm
[    2.690616] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.690641] usbcore: registered new interface driver usblp
[    2.690681] usbcore: registered new interface driver usb-storage
[    2.690745] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.929795] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.958518] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.958776] rtc_cmos 00:02: RTC can wake from S4
[    2.964719] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.967048] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[    2.968226] i2c /dev entries driver
[    2.968291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.971111] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.044459] hub 1-1:1.0: USB hub found
[    3.044647] hub 1-1:1.0: 4 ports detected
[    3.102978] clocksource: Switched to clocksource tsc
[    3.317782] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    3.405065] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    3.406536] scsi host10: usb-storage 1-1.2:1.0
[    3.975776] ismt_smbus 0000:00:13.0: completion wait timed out
[    4.981753] ismt_smbus 0000:00:13.0: completion wait timed out
[    5.987749] ismt_smbus 0000:00:13.0: completion wait timed out
[    6.993719] ismt_smbus 0000:00:13.0: completion wait timed out
[    7.000493] it87: Found IT8732F chip at 0xa30, revision 2
[    7.000539] it87: Configuring VIN3 for external sensor
[    7.000668] it87 it87.2608: Reconfiguring PWM to active high polarity
[    7.001337] md: raid0 personality registered for level 0
[    7.001342] md: raid1 personality registered for level 1
[    7.001346] md: raid10 personality registered for level 10
[    7.001418] md: raid6 personality registered for level 6
[    7.001421] md: raid5 personality registered for level 5
[    7.001423] md: raid4 personality registered for level 4
[    7.001583] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    7.003774] usbcore: registered new interface driver btusb
[    7.003858] usbcore: registered new interface driver usbhid
[    7.003860] usbhid: USB HID core driver
[    7.004019] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.004326] NET: Registered protocol family 10
[    7.005724] NET: Registered protocol family 17
[    7.005758] 8021q: 802.1Q VLAN Support v1.8
[    7.005785] Key type dns_resolver registered
[    7.006031] readynas_io_init: initializing ReadyNAS I/O.
[    7.006034] procfs_init: initializing ReadyNAS procfs.
[    7.006054] pwr_button_state_init: initializing ReadyNAS PWR button state handler for rn313x.
[    7.006078] button_init: initializing ReadyNAS button set.
[    7.006082] __button_init: button 'uid' gpio_it87:55 (POLL)
[    7.006149] __button_init: button 'reset' gpio_it87:21n (IRQ)
[    7.006287] rn_button 'reset' IRQ#45
[    7.006891] input: rn_button as /devices/virtual/input/input2
[    7.006976] readynas_io_init: initialization successfully completed.
[    7.007084] readynas_lcd_init: installing ReadyNAS LCD driver.
[    7.007186] readynas_led_init: installing ReadyNAS LED driver.
[    7.009572] register_led: registering LED "readynas:green:pwr"
[    7.009726] register_led: registering LED "readynas:red:err"
[    7.009824] register_led: registering LED "readynas:blue:uid"
[    7.009979] register_led: registering LED ".readynas::sata1_pwr"
[    7.010016] register_led: registering LED ".readynas::sata2_pwr"
[    7.010048] register_led: registering LED ".readynas::sata3_pwr"
[    7.010083] register_led: registering LED ".readynas::sata4_pwr"
[    7.010117] register_led: registering LED "readynas:green:sata1"
[    7.010149] register_led: registering LED "readynas:green:sata2"
[    7.010184] register_led: registering LED "readynas:green:sata3"
[    7.010218] register_led: registering LED "readynas:green:sata4"
[    7.010250] register_led: registering LED "readynas:red:sata1"
[    7.010287] register_led: registering LED "readynas:red:sata2"
[    7.010323] register_led: registering LED "readynas:red:sata3"
[    7.010360] register_led: registering LED "readynas:red:sata4"
[    7.010571] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x122
[    7.010581] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x122
[    7.010595] microcode: CPU2 sig=0x406d8, pf=0x1, revision=0x122
[    7.010607] microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x122
[    7.010703] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.010727] SSE version of gcm_enc/dec engaged.
[    7.020951] registered taskstats version 1
[    7.022792] Btrfs loaded, crc32c=crc32c-intel
[    7.023332] rtc_cmos 00:02: setting system clock to 2021-08-14 14:58:52 UTC (1628953132)
[    7.024803] ALSA device list:
[    7.024808]   No soundcards found.
[    7.025420] Freeing unused kernel memory: 856K
[    7.030111] vpd: module license 'Proprietary' taints kernel.
[    7.030116] Disabling lock debugging due to kernel taint
[    7.030250] ReadyNAS VPD init
[    7.467496] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.467503] 8021q: adding VLAN 0 to HW filter on device eth0
[    7.811480] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    7.811486] 8021q: adding VLAN 0 to HW filter on device eth1
[    8.155466] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    8.155471] 8021q: adding VLAN 0 to HW filter on device eth2
[    8.419587] scsi 10:0:0:0: Direct-Access              USB DISK MODULE  PMAP PQ: 0 ANSI: 4
[    8.420191] sd 10:0:0:0: Attached scsi generic sg0 type 0
[    8.421564] sd 10:0:0:0: [sda] 497664 512-byte logical blocks: (255 MB/243 MiB)
[    8.425371] sd 10:0:0:0: [sda] Write Protect is off
[    8.425378] sd 10:0:0:0: [sda] Mode Sense: 23 00 00 00
[    8.429209] sd 10:0:0:0: [sda] No Caching mode page found
[    8.429214] sd 10:0:0:0: [sda] Assuming drive cache: write through
[    8.440747]  sda: sda1
[    8.449318] sd 10:0:0:0: [sda] Attached SCSI removable disk
[    8.499489] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    8.499496] 8021q: adding VLAN 0 to HW filter on device eth3
[   10.275055] igb 0000:00:14.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   10.275166] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.509671] random: mktemp: uninitialized urandom read (6 bytes read, 40 bits of entropy available)
[   16.880741] random: mktemp: uninitialized urandom read (6 bytes read, 56 bits of entropy available)
[   39.706273] random: nonblocking pool is initialized
# 
Process list>>

# ps 
  PID USER       VSZ STAT COMMAND
    1 root     22756 S    /init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    5 root         0 SW<  [kworker/0:0H]
    7 root         0 SW   [rcu_sched]
    8 root         0 SW   [rcu_bh]
    9 root         0 SW   [migration/0]
   10 root         0 SW   [watchdog/0]
   11 root         0 SW   [watchdog/1]
   12 root         0 SW   [migration/1]
   13 root         0 SW   [ksoftirqd/1]
   15 root         0 SW<  [kworker/1:0H]
   16 root         0 SW   [watchdog/2]
   17 root         0 SW   [migration/2]
   18 root         0 SW   [ksoftirqd/2]
   19 root         0 SW   [kworker/2:0]
   20 root         0 SW<  [kworker/2:0H]
   21 root         0 SW   [watchdog/3]
   22 root         0 SW   [migration/3]
   23 root         0 SW   [ksoftirqd/3]
   24 root         0 SW   [kworker/3:0]
   25 root         0 SW<  [kworker/3:0H]
   26 root         0 SW   [kdevtmpfs]
   27 root         0 SW<  [netns]
   30 root         0 SW<  [perf]
  391 root         0 SW   [khungtaskd]
  392 root         0 SW<  [writeback]
  394 root         0 SW<  [crypto]
  395 root         0 SW<  [bioset]
  397 root         0 SW<  [kblockd]
  511 root         0 SW<  [md]
  611 root         0 SW<  [rpciod]
  613 root         0 SW   [kworker/0:1]
  623 root         0 SW   [kswapd0]
  643 root         0 SW<  [vmstat]
  720 root         0 SW   [fsnotify_mark]
  733 root         0 SW<  [nfsiod]
  739 root         0 SW<  [cifsiod]
  775 root         0 SW<  [kthrotld]
  796 root         0 SW<  [acpi_thermal_pm]
  815 root         0 SW<  [bioset]
  818 root         0 SW<  [bioset]
  821 root         0 SW<  [bioset]
  824 root         0 SW<  [bioset]
  827 root         0 SW<  [bioset]
  830 root         0 SW<  [bioset]
  833 root         0 SW<  [bioset]
  836 root         0 SW<  [bioset]
  861 root         0 SW<  [nvme]
  879 root         0 SW   [scsi_eh_0]
  880 root         0 SW<  [scsi_tmf_0]
  883 root         0 SW   [scsi_eh_1]
  884 root         0 SW<  [scsi_tmf_1]
  887 root         0 SW   [scsi_eh_2]
  888 root         0 SW<  [scsi_tmf_2]
  891 root         0 SW   [scsi_eh_3]
  892 root         0 SW<  [scsi_tmf_3]
  902 root         0 SW   [scsi_eh_4]
  903 root         0 SW<  [scsi_tmf_4]
  906 root         0 SW   [scsi_eh_5]
  907 root         0 SW<  [scsi_tmf_5]
  910 root         0 SW   [kworker/u8:6]
  911 root         0 SW   [scsi_eh_6]
  912 root         0 SW<  [scsi_tmf_6]
  913 root         0 SW   [kworker/u8:7]
  914 root         0 SW   [scsi_eh_7]
  915 root         0 SW<  [scsi_tmf_7]
  928 root         0 SW   [scsi_eh_8]
  932 root         0 SW<  [scsi_tmf_8]
  939 root         0 SW   [scsi_eh_9]
  940 root         0 SW<  [scsi_tmf_9]
  944 root         0 SW<  [target_completi]
  945 root         0 SW<  [tmr-rd_mcp]
  946 root         0 SW<  [xcopy_wq]
  972 root         0 SW   [kworker/2:1]
 1029 root         0 SW<  [ixgbe]
 1031 root         0 SW<  [i40e]
 1032 root         0 SW<  [bnx2x]
 1034 root         0 SW<  [bnx2x_iov]
 1057 root         0 SW   [kworker/3:1]
 1058 root         0 SW   [kworker/1:2]
 1067 root         0 SW   [kworker/1:3]
 1081 root         0 SW   [scsi_eh_10]
 1082 root         0 SW<  [scsi_tmf_10]
 1083 root         0 SW   [usb-storage]
 1096 root         0 SW<  [raid5wq]
 1100 root         0 SW<  [dm_bufio_cache]
 1101 root         0 SW<  [ipv6_addrconf]
 1120 root         0 SW   [readynas-button]
 1131 root         0 SW   [readynas-led]
 1167 root         0 SW<  [bioset]
 1178 root         0 SW<  [deferwq]
 1211 root      4904 S    raidard
 1216 root         0 Z    [ifplugd]
 1219 root      3116 S    ifplugd -i eth1
 1222 root      3116 S    ifplugd -i eth2
 1225 root      3116 S    ifplugd -i eth3
 1250 root         0 SW<  [bioset]
 1308 root         0 SW<  [kworker/2:1H]
 1309 root         0 SW<  [kworker/3:1H]
 1321 root         0 SW<  [kworker/0:1H]
 1322 root         0 SW<  [kworker/1:1H]
 1326 root      3108 S    /bin/sh -c /sbin/getty 115200 console vt100
 1328 root      3120 S    -sh
 1339 root      3100 S    /usr/sbin/telnetd
 1344 root      3104 R    ps
# 
Filesystems>>

# findmnt
-sh: findmnt: not found
# lsblk
-sh: lsblk: not found
# mount
rootfs on / type rootfs (rw,size=1999292k,nr_inodes=499823)
proc on /proc type proc (rw,noatime,nodiratime)
sysfs on /sys type sysfs (rw,noatime,nodiratime)
udev on /dev type devtmpfs (rw,noatime,nodiratime,size=10240k,nr_inodes=499828,mode=755)
devpts on /dev/pts type devpts (rw,noatime,nodiratime,mode=600,ptmxmode=000)
/dev/sda1 on /media/boot type msdos (ro,noatime,nodiratime,fmask=0022,dmask=0022,codepage=437,flush,errors=remount-ro)
# df -h
Filesystem                Size      Used Available Use% Mounted on
udev                     10.0M         0     10.0M   0% /dev
/dev/sda1               223.7M     66.7M    157.1M  30% /media/boot
# 

Boot menu

The operating manual details how the NAS can be forced into entering a "boot menu" mode where a number of manual administrative actions can be performed such as reseting the device to factory defaults. This task is achieved by holding the "Reset" button while the device boots. After the boot menu is entered the reset button press changes the boot menu option and a longer press accepts the selection.

Accessing boot menu

As an example below the "Tech support" mode is entered:

Boot log>>

                                                                                
[    3.976799] ismt_smbus 0000:00:13.0: completion wait timed out
[    4.982795] ismt_smbus 0000:00:13.0: completion wait timed out
[    5.988789] ismt_smbus 0000:00:13.0: completion wait timed out
[    6.994782] ismt_smbus 0000:00:13.0: completion wait timed out

Starting the boot process...
Detected system type: RN3130
Loading kernel modules...done
entering boot menu
[    8.428001] sd 10:0:0:0: [sda] No Caching mode page found
[    8.434051] sd 10:0:0:0: [sda] Assuming drive cache: write through
boot reason[0]:      Normal
boot reason[1]: Factory Default
boot reason[2]:   OS Reinstall
boot reason[3]:   Tech Support
boot reason[4]: Volume ReadOnly
boot reason[5]:   Memory Test
boot reason[6]:    Test Disks
boot reason[0]:      Normal
boot reason[1]: Factory Default
boot reason[2]:   OS Reinstall
boot reason[3]:   Tech Support
Boot mode: Tech Support
Searching for disks (1)...

Tech support boot

The tech support mode can be entered from the boot menu. This mode appears almost identical to the "Emergency boot" mode shown before, there are however additiona processes running in the background. The most important of those seems to be the "rnutil remote_access -b" which is a remote diagnosis tool establishing a VPN connection to Netgear so that a support engineer can remotely login and perform troubleshooting.

Boot log>>

Starting the boot process...
Detected system type: RN3130
Loading kernel modules...done
entering boot menu
[    8.428001] sd 10:0:0:0: [sda] No Caching mode page found
[    8.434051] sd 10:0:0:0: [sda] Assuming drive cache: write through
boot reason[0]:      Normal
boot reason[1]: Factory Default
boot reason[2]:   OS Reinstall
boot reason[3]:   Tech Support
boot reason[4]: Volume ReadOnly
boot reason[5]:   Memory Test
boot reason[6]:    Test Disks
boot reason[0]:      Normal
boot reason[1]: Factory Default
boot reason[2]:   OS Reinstall
boot reason[3]:   Tech Support
Boot mode: Tech Support
Searching for disks (5)...
Bringing up network...eth0.done
Going to Tech Support mode
command failed: mdev -s

Welcome to ReadyNASOS
4HM973E30013B login: root
Password: 
Aug 14 15:18:35 login[1392]: root login on 'console'
# 
Dmesg>>

# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.98.x86_64.1 (jenkins@blocks) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu Nov 16 11:42:47 PST 2017
[    0.000000] Command line: BOOT_IMAGE=kernel initrd=initrd.gz reason=normal
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d8f7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d8f8000-0x000000007e330fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007e331000-0x000000007e618fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e619000-0x000000007f189fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f18a000-0x000000007f640fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f641000-0x000000007f7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: NETGEAR ReadyNAS 3138/To be filled by O.E.M., BIOS 5.6.5 03/05/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask F80000000 uncachable
[    0.000000]   1 base 180000000 mask F80000000 uncachable
[    0.000000]   2 base 200000000 mask E00000000 uncachable
[    0.000000]   3 base 400000000 mask C00000000 uncachable
[    0.000000]   4 base 800000000 mask 800000000 uncachable
[    0.000000]   5 base 07F800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] BRK [0x0910b000, 0x0910bfff] PGTABLE
[    0.000000] BRK [0x0910c000, 0x0910cfff] PGTABLE
[    0.000000] BRK [0x0910d000, 0x0910dfff] PGTABLE
[    0.000000] BRK [0x0910e000, 0x0910efff] PGTABLE
[    0.000000] BRK [0x0910f000, 0x0910ffff] PGTABLE
[    0.000000] BRK [0x09110000, 0x09110fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7d4db000-0x7d8f7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007E65D090 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007E65FF68 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007E65D1C0 002DA8 (v02 ALASKA A M I    01072009 INTL 20061109)
[    0.000000] ACPI: FACS 0x000000007F187F80 000040
[    0.000000] ACPI: FPDT 0x000000007E660078 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007E6600C0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007E660160 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: WDAT 0x000000007E6601A0 0001AC (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: UEFI 0x000000007E660350 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: APIC 0x000000007E660398 000078 (v03 INTEL  TIANO    00000001 MSFT 00000000)
[    0.000000] ACPI: BDAT 0x000000007E660410 000030 (v01                 00000000      00000000)
[    0.000000] ACPI: HPET 0x000000007E660440 000038 (v01 INTEL           00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000007E660478 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SPCR 0x000000007E660E70 000050 (v01 A M I  APTIO V  01072009 AMI. 00000005)
[    0.000000] ACPI: HEST 0x000000007E660EC0 0000A8 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: BERT 0x000000007E660F68 000030 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: ERST 0x000000007E660F98 000230 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: EINJ 0x000000007E6611C8 000150 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007d8f7fff]
[    0.000000]   node   0: [mem 0x000000007e331000-0x000000007e618fff]
[    0.000000]   node   0: [mem 0x000000007f641000-0x000000007f7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1039673
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7991 pages used for memmap
[    0.000000]   DMA32 zone: 511391 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88017fc00000 s85912 r8192 d28776 u524288
[    0.000000] pcpu-alloc: s85912 r8192 d28776 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1023405
[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200 hpet=disable BOOT_IMAGE=kernel initrd=initrd.gz reason=normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3998584K/4158692K available (10709K kernel code, 991K rwdata, 4104K rodata, 856K init, 732K bss, 160108K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 2400.017 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.03 BogoMIPS (lpj=2400017)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20150930
[    0.003570] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.003596] Security Framework initialized
[    0.003611] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003614] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003868] Initializing cgroup subsys io
[    0.003874] Initializing cgroup subsys memory
[    0.003884] Initializing cgroup subsys devices
[    0.003888] Initializing cgroup subsys freezer
[    0.003892] Initializing cgroup subsys net_cls
[    0.003895] Initializing cgroup subsys perf_event
[    0.003900] Initializing cgroup subsys net_prio
[    0.003905] Initializing cgroup subsys pids
[    0.003924] CPU: Physical Processor ID: 0
[    0.003927] CPU: Processor Core ID: 0
[    0.008145] mce: CPU supports 6 MCE banks
[    0.008158] CPU0: Thermal monitoring enabled (TM1)
[    0.008162] process: using mwait in idle threads
[    0.008167] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.008169] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.008490] Freeing SMP alternatives memory: 40K
[    0.009452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019480] TSC deadline timer enabled
[    0.019484] smpboot: CPU0: Intel(R) Atom(TM) CPU  C2558  @ 2.40GHz (family: 0x6, model: 0x4d, stepping: 0x8)
[    0.019507] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.019519] ... version:                3
[    0.019521] ... bit width:              40
[    0.019523] ... generic registers:      2
[    0.019525] ... value mask:             000000ffffffffff
[    0.019527] ... max period:             0000007fffffffff
[    0.019528] ... fixed-purpose events:   3
[    0.019530] ... event mask:             0000000700000003
[    0.021154] x86: Booting SMP configuration:
[    0.021159] .... node  #0, CPUs:      #1 #2 #3
[    0.039063] x86: Booted up 1 node, 4 CPUs
[    0.039068] smpboot: Total of 4 processors activated (19200.13 BogoMIPS)
[    0.039511] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.039728] devtmpfs: initialized
[    0.040194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.040204] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040322] xor: measuring software checksum speed
[    0.050067]    prefetch64-sse:  8108.000 MB/sec
[    0.060085]    generic_sse:  7332.000 MB/sec
[    0.060088] xor: using function: prefetch64-sse (8108.000 MB/sec)
[    0.060105] pinctrl core: initialized pinctrl subsystem
[    0.060356] NET: Registered protocol family 16
[    0.064101] cpuidle: using governor ladder
[    0.068108] cpuidle: using governor menu
[    0.068201] ACPI: bus type PCI registered
[    0.068295] dca service started, version 1.12.1
[    0.068314] PCI: Using configuration type 1 for base access
[    0.094257] raid6: sse2x1   gen()   679 MB/s
[    0.111212] raid6: sse2x1   xor()  2447 MB/s
[    0.128280] raid6: sse2x2   gen()  1101 MB/s
[    0.145264] raid6: sse2x2   xor()  2908 MB/s
[    0.162282] raid6: sse2x4   gen()  1796 MB/s
[    0.179308] raid6: sse2x4   xor()  2623 MB/s
[    0.179311] raid6: using algorithm sse2x4 gen() 1796 MB/s
[    0.179312] raid6: .... xor() 2623 MB/s, rmw enabled
[    0.179317] raid6: using ssse3x2 recovery algorithm
[    0.179523] ACPI: Added _OSI(Module Device)
[    0.179526] ACPI: Added _OSI(Processor Device)
[    0.179529] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.179531] ACPI: Added _OSI(Processor Aggregator Device)
[    0.183347] ACPI: Dynamic OEM Table Load:
[    0.183358] ACPI: SSDT 0xFFFF880079388800 00044E (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.183714] ACPI: Dynamic OEM Table Load:
[    0.183721] ACPI: SSDT 0xFFFF8800792AB000 0001FA (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.184354] ACPI: Dynamic OEM Table Load:
[    0.184363] ACPI: SSDT 0xFFFF880079389000 00047A (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.184954] ACPI: Dynamic OEM Table Load:
[    0.184961] ACPI: SSDT 0xFFFF8800792AB200 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.186018] ACPI: Interpreter enabled
[    0.186028] ACPI: (supports S0 S5)
[    0.186031] ACPI: Using IOAPIC for interrupt routing
[    0.186084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.191404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.191413] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.191543] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.191722] PCI host bridge to bus 0000:00
[    0.191728] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.191732] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.191735] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.191739] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.191742] pci_bus 0000:00: root bus resource [mem 0x180000000-0xfffffffff window]
[    0.191746] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.191757] pci 0000:00:00.0: [8086:1f0b] type 00 class 0x060000
[    0.191893] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400
[    0.191923] pci 0000:00:01.0: reg 0x10: [mem 0xdff00000-0xdff1ffff 64bit]
[    0.191961] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.192074] pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400
[    0.192103] pci 0000:00:02.0: reg 0x10: [mem 0xdfee0000-0xdfefffff 64bit]
[    0.192139] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.192245] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400
[    0.192274] pci 0000:00:03.0: reg 0x10: [mem 0xdfec0000-0xdfedffff 64bit]
[    0.192310] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.192424] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400
[    0.192453] pci 0000:00:04.0: reg 0x10: [mem 0xdfea0000-0xdfebffff 64bit]
[    0.192489] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.192611] pci 0000:00:0b.0: [8086:1f18] type 00 class 0x0b4000
[    0.192649] pci 0000:00:0b.0: reg 0x18: [mem 0xdfe80000-0xdfe9ffff 64bit]
[    0.192663] pci 0000:00:0b.0: reg 0x20: [mem 0xdff30000-0xdff33fff 64bit]
[    0.192808] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000
[    0.192946] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600
[    0.192997] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.193110] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000
[    0.193141] pci 0000:00:13.0: reg 0x10: [mem 0xdff38000-0xdff383ff 64bit]
[    0.193313] pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000
[    0.193343] pci 0000:00:14.0: reg 0x10: [mem 0xdfe60000-0xdfe7ffff 64bit]
[    0.193354] pci 0000:00:14.0: reg 0x18: [io  0xe0c0-0xe0df]
[    0.193374] pci 0000:00:14.0: reg 0x20: [mem 0xdff2c000-0xdff2ffff 64bit]
[    0.193418] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.193532] pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000
[    0.193563] pci 0000:00:14.1: reg 0x10: [mem 0xdfe40000-0xdfe5ffff 64bit]
[    0.193573] pci 0000:00:14.1: reg 0x18: [io  0xe0a0-0xe0bf]
[    0.193593] pci 0000:00:14.1: reg 0x20: [mem 0xdff28000-0xdff2bfff 64bit]
[    0.193632] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.193748] pci 0000:00:14.2: [8086:1f41] type 00 class 0x020000
[    0.193778] pci 0000:00:14.2: reg 0x10: [mem 0xdfe20000-0xdfe3ffff 64bit]
[    0.193788] pci 0000:00:14.2: reg 0x18: [io  0xe080-0xe09f]
[    0.193809] pci 0000:00:14.2: reg 0x20: [mem 0xdff24000-0xdff27fff 64bit]
[    0.193848] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.193962] pci 0000:00:14.3: [8086:1f41] type 00 class 0x020000
[    0.193992] pci 0000:00:14.3: reg 0x10: [mem 0xdfe00000-0xdfe1ffff 64bit]
[    0.194002] pci 0000:00:14.3: reg 0x18: [io  0xe060-0xe07f]
[    0.194023] pci 0000:00:14.3: reg 0x20: [mem 0xdff20000-0xdff23fff 64bit]
[    0.194061] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.194181] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320
[    0.194218] pci 0000:00:16.0: reg 0x10: [mem 0xdff37000-0xdff373ff]
[    0.194313] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.194431] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601
[    0.194456] pci 0000:00:17.0: reg 0x10: [io  0xe150-0xe157]
[    0.194466] pci 0000:00:17.0: reg 0x14: [io  0xe140-0xe143]
[    0.194475] pci 0000:00:17.0: reg 0x18: [io  0xe130-0xe137]
[    0.194484] pci 0000:00:17.0: reg 0x1c: [io  0xe120-0xe123]
[    0.194494] pci 0000:00:17.0: reg 0x20: [io  0xe040-0xe05f]
[    0.194503] pci 0000:00:17.0: reg 0x24: [mem 0xdff36000-0xdff367ff]
[    0.194537] pci 0000:00:17.0: PME# supported from D3hot
[    0.194648] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601
[    0.194673] pci 0000:00:18.0: reg 0x10: [io  0xe110-0xe117]
[    0.194683] pci 0000:00:18.0: reg 0x14: [io  0xe100-0xe103]
[    0.194692] pci 0000:00:18.0: reg 0x18: [io  0xe0f0-0xe0f7]
[    0.194701] pci 0000:00:18.0: reg 0x1c: [io  0xe0e0-0xe0e3]
[    0.194711] pci 0000:00:18.0: reg 0x20: [io  0xe020-0xe03f]
[    0.194720] pci 0000:00:18.0: reg 0x24: [mem 0xdff35000-0xdff357ff]
[    0.194754] pci 0000:00:18.0: PME# supported from D3hot
[    0.194871] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100
[    0.195053] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500
[    0.195073] pci 0000:00:1f.3: reg 0x10: [mem 0xdff34000-0xdff3401f]
[    0.195106] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
[    0.195286] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.195355] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601
[    0.195383] pci 0000:02:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.195400] pci 0000:02:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.195411] pci 0000:02:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.195422] pci 0000:02:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.195433] pci 0000:02:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.195444] pci 0000:02:00.0: reg 0x24: [mem 0xdfd10000-0xdfd101ff]
[    0.195456] pci 0000:02:00.0: reg 0x30: [mem 0xdfd00000-0xdfd0ffff pref]
[    0.195493] pci 0000:02:00.0: PME# supported from D3hot
[    0.197411] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.197417] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.197421] pci 0000:00:02.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.197497] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.197538] pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc07fff 64bit]
[    0.197641] pci 0000:03:00.0: PME# supported from D3cold
[    0.199414] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.199421] pci 0000:00:03.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.199490] pci 0000:04:00.0: [1b4b:9170] type 00 class 0x010601
[    0.199518] pci 0000:04:00.0: reg 0x10: [io  0xc040-0xc047]
[    0.199529] pci 0000:04:00.0: reg 0x14: [io  0xc030-0xc033]
[    0.199540] pci 0000:04:00.0: reg 0x18: [io  0xc020-0xc027]
[    0.199551] pci 0000:04:00.0: reg 0x1c: [io  0xc010-0xc013]
[    0.199562] pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc00f]
[    0.199573] pci 0000:04:00.0: reg 0x24: [mem 0xdfb10000-0xdfb101ff]
[    0.199584] pci 0000:04:00.0: reg 0x30: [mem 0xdfb00000-0xdfb0ffff pref]
[    0.199620] pci 0000:04:00.0: PME# supported from D3hot
[    0.201417] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.201423] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.201428] pci 0000:00:04.0:   bridge window [mem 0xdfb00000-0xdfbfffff]
[    0.201456] pci_bus 0000:00: on NUMA node 0
[    0.201621] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12)
[    0.201727] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 10 11 12) *0, disabled.
[    0.201833] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12)
[    0.201937] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12)
[    0.202041] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12)
[    0.202145] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12)
[    0.202248] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12)
[    0.202352] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12)
[    0.202736] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.202927] SCSI subsystem initialized
[    0.202952] libata version 3.00 loaded.
[    0.202961] ACPI: bus type USB registered
[    0.203006] usbcore: registered new interface driver usbfs
[    0.203027] usbcore: registered new interface driver hub
[    0.203053] usbcore: registered new device driver usb
[    0.203106] pps_core: LinuxPPS API ver. 1 registered
[    0.203109] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.203121] PTP clock support registered
[    0.203261] Advanced Linux Sound Architecture Driver Initialized.
[    0.203283] PCI: Using ACPI for IRQ routing
[    0.203286] PCI: pci_cache_line_size set to 64 bytes
[    0.203343] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    0.203346] e820: reserve RAM buffer [mem 0x7d8f8000-0x7fffffff]
[    0.203349] e820: reserve RAM buffer [mem 0x7e619000-0x7fffffff]
[    0.203351] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[    0.203543] Bluetooth: Core ver 2.21
[    0.203559] NET: Registered protocol family 31
[    0.203561] Bluetooth: HCI device and connection manager initialized
[    0.203565] Bluetooth: HCI socket layer initialized
[    0.203569] Bluetooth: L2CAP socket layer initialized
[    0.203577] Bluetooth: SCO socket layer initialized
[    0.203755] clocksource: Switched to clocksource refined-jiffies
[    0.203859] FS-Cache: Loaded
[    0.203928] pnp: PnP ACPI init
[    0.204281] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.204286] system 00:00: [mem 0x7f800000-0x7fffffff] could not be reserved
[    0.204292] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.204385] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.204389] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.204393] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.204397] system 00:01: [mem 0xfed00000-0xfedfffff] could not be reserved
[    0.204400] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
[    0.204404] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.204408] system 00:01: [mem 0xffa00000-0xffffffff] has been reserved
[    0.204419] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.204425] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204474] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.204553] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.204626] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.204952] system 00:05: [io  0x0a00-0x0a1f] has been reserved
[    0.204956] system 00:05: [io  0x0a20-0x0a2f] has been reserved
[    0.204960] system 00:05: [io  0x0a30-0x0a3f] has been reserved
[    0.204967] system 00:05: [io  0x0a40-0x0a4f] has been reserved
[    0.204971] system 00:05: [io  0x0a50-0x0a5f] has been reserved
[    0.204975] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205106] pnp: PnP ACPI: found 6 devices
[    0.212768] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.212794] clocksource: Switched to clocksource acpi_pm
[    0.212816] pci 0000:00:01.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.212822] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.212826] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.212837] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.212848] pci 0000:00:03.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.212853] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.212863] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.212874] pci 0000:00:01.0: res[8]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.212879] pci 0000:00:01.0: res[8]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.212882] pci 0000:00:01.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212886] pci 0000:00:01.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212890] pci 0000:00:02.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212894] pci 0000:00:02.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212898] pci 0000:00:03.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212902] pci 0000:00:03.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212906] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212910] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.212914] pci 0000:00:01.0: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.212917] pci 0000:00:01.0: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.212921] pci 0000:00:03.0: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.212924] pci 0000:00:03.0: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.212932] pci 0000:00:01.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.212939] pci 0000:00:01.0: BAR 9: assigned [mem 0x180000000-0x1801fffff 64bit pref]
[    0.212945] pci 0000:00:02.0: BAR 9: assigned [mem 0x180200000-0x1803fffff 64bit pref]
[    0.212950] pci 0000:00:03.0: BAR 9: assigned [mem 0x180400000-0x1805fffff 64bit pref]
[    0.212956] pci 0000:00:04.0: BAR 9: assigned [mem 0x180600000-0x1807fffff 64bit pref]
[    0.212961] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.212966] pci 0000:00:03.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.212971] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.212976] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.212982] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.212989] pci 0000:00:01.0:   bridge window [mem 0x180000000-0x1801fffff 64bit pref]
[    0.212997] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.213001] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.213007] pci 0000:00:02.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.213013] pci 0000:00:02.0:   bridge window [mem 0x180200000-0x1803fffff 64bit pref]
[    0.213022] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.213026] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.213032] pci 0000:00:03.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.213038] pci 0000:00:03.0:   bridge window [mem 0x180400000-0x1805fffff 64bit pref]
[    0.213046] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.213050] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.213056] pci 0000:00:04.0:   bridge window [mem 0xdfb00000-0xdfbfffff]
[    0.213062] pci 0000:00:04.0:   bridge window [mem 0x180600000-0x1807fffff 64bit pref]
[    0.213073] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.213076] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.213079] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.213083] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.213086] pci_bus 0000:00: resource 8 [mem 0x180000000-0xfffffffff window]
[    0.213089] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.213092] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.213096] pci_bus 0000:01: resource 2 [mem 0x180000000-0x1801fffff 64bit pref]
[    0.213099] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.213102] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.213106] pci_bus 0000:02: resource 2 [mem 0x180200000-0x1803fffff 64bit pref]
[    0.213109] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.213112] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.213116] pci_bus 0000:03: resource 2 [mem 0x180400000-0x1805fffff 64bit pref]
[    0.213119] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.213122] pci_bus 0000:04: resource 1 [mem 0xdfb00000-0xdfbfffff]
[    0.213125] pci_bus 0000:04: resource 2 [mem 0x180600000-0x1807fffff 64bit pref]
[    0.213166] NET: Registered protocol family 2
[    0.213363] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.213444] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.213598] TCP: Hash tables configured (established 32768 bind 32768)
[    0.213651] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.213678] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.213812] NET: Registered protocol family 1
[    0.213947] RPC: Registered named UNIX socket transport module.
[    0.213949] RPC: Registered udp transport module.
[    0.213951] RPC: Registered tcp transport module.
[    0.213953] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.225123] PCI: CLS 64 bytes, default 64
[    0.225212] Unpacking initramfs...
[    1.095343] Freeing initrd memory: 4212K
[    1.095359] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.095363] software IO TLB [mem 0x794db000-0x7d4db000] (64MB) mapped at [ffff8800794db000-ffff88007d4dafff]
[    1.130118] VFS: Disk quotas dquot_6.6.0
[    1.130200] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.133705] NFS: Registering the id_resolver key type
[    1.133723] Key type id_resolver registered
[    1.133725] Key type id_legacy registered
[    1.133732] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.134219] Key type cifs.spnego registered
[    1.134234] Key type cifs.idmap registered
[    1.134315] fuse init (API version 7.23)
[    1.139884] NET: Registered protocol family 38
[    1.139897] async_tx: api initialized (async)
[    1.139999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.140099] io scheduler noop registered
[    1.140103] io scheduler deadline registered
[    1.140163] io scheduler cfq registered (default)
[    1.140262] io scheduler bfq registered
[    1.140265] BFQ I/O-scheduler: v7r11
[    1.140778] gpio_it87: Found Chip IT8732 rev 2. 64 GPIO lines starting at 0a10h
[    1.141485] pcieport 0000:00:04.0: can't derive routing for PCI INT A
[    1.141490] pcieport 0000:00:04.0: PCI INT A: no GSI
[    1.141576] intel_idle: MWAIT substates: 0x3000020
[    1.141579] intel_idle: v0.4.1 model 0x4D
[    1.141581] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.141871] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.141878] ACPI: Power Button [PWRF]
[    1.143672] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    1.143885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.164240] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.184671] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.185286] Linux agpgart interface v0.103
[    1.185339] [drm] Initialized drm 1.1.0 20060810
[    1.192807] loop: module loaded
[    1.193201] gpio_ich: GPIO from 388 to 447 on gpio_ich
[    1.193353] mpt3sas version 12.100.00.00 loaded
[    1.201940] ahci 0000:00:17.0: version 3.0
[    1.212868] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.212875] ahci 0000:00:17.0: flags: 64bit ncq led clo pio deso sadm sds apst 
[    1.212918] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.212955] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.212987] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.213019] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.214657] scsi host0: ahci
[    1.216839] scsi host1: ahci
[    1.218216] scsi host2: ahci
[    1.219547] scsi host3: ahci
[    1.219651] ata1: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36100 irq 88
[    1.219656] ata2: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36180 irq 88
[    1.219659] ata3: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36200 irq 88
[    1.219662] ata4: SATA max UDMA/133 abar m2048@0xdff36000 port 0xdff36280 irq 88
[    1.231841] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.231849] ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sadm sds apst 
[    1.231890] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.231921] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.234631] scsi host4: ahci
[    1.234851] scsi host5: ahci
[    1.234933] ata5: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 89
[    1.234937] ata6: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 89
[    1.235178] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.235184] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.235231] ReadyNAS model: ReadyNAS 3138
[    1.235236] do_marvell_9170_recover: start_engine() called for PCI#2 port 0
[    1.235238] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.235242] marvell_9170_save_pci_dev: pci[4]=100407
[    1.235245] marvell_9170_save_pci_dev: pci[c]=10
[    1.235248] marvell_9170_save_pci_dev: pci[10]=d041
[    1.235251] marvell_9170_save_pci_dev: pci[14]=d031
[    1.235254] marvell_9170_save_pci_dev: pci[18]=d021
[    1.235257] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.235260] marvell_9170_save_pci_dev: pci[20]=d001
[    1.235263] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.235266] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.235269] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.235272] marvell_9170_save_pci_dev: pci[44]=0
[    1.235275] marvell_9170_save_pci_dev: pci[50]=17005
[    1.235278] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.235281] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.235284] marvell_9170_save_pci_dev: pci[78]=92027
[    1.235287] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.235290] marvell_9170_save_pci_dev: pci[a0]=2
[    1.235292] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.235295] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.235298] marvell_9170_save_pci_dev: dev[104]=0
[    1.235300] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.235303] marvell_9170_save_pci_dev: dev[10c]=0
[    1.235305] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.235307] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.235309] marvell_9170_save_pci_dev: dev[118]=710011
[    1.235312] marvell_9170_save_pci_dev: dev[180]=98500
[    1.235315] marvell_9170_save_pci_dev: dev[184]=0
[    1.235317] marvell_9170_save_pci_dev: dev[188]=98540
[    1.235320] marvell_9170_save_pci_dev: dev[18c]=0
[    1.235322] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.235324] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.235326] marvell_9170_save_pci_dev: dev[198]=710011
[    1.235367] do_marvell_9170_recover: start_engine() called for PCI#2 port 1
[    1.235369] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.235372] marvell_9170_save_pci_dev: pci[4]=100407
[    1.235376] marvell_9170_save_pci_dev: pci[c]=10
[    1.235379] marvell_9170_save_pci_dev: pci[10]=d041
[    1.235382] marvell_9170_save_pci_dev: pci[14]=d031
[    1.235385] marvell_9170_save_pci_dev: pci[18]=d021
[    1.235388] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.235391] marvell_9170_save_pci_dev: pci[20]=d001
[    1.235394] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.235397] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.235400] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.235403] marvell_9170_save_pci_dev: pci[44]=0
[    1.235406] marvell_9170_save_pci_dev: pci[50]=17005
[    1.235409] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.235412] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.235415] marvell_9170_save_pci_dev: pci[78]=92027
[    1.235418] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.235421] marvell_9170_save_pci_dev: pci[a0]=2
[    1.235423] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.235426] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.235428] marvell_9170_save_pci_dev: dev[104]=0
[    1.235431] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.235434] marvell_9170_save_pci_dev: dev[10c]=0
[    1.235436] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.235438] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.235440] marvell_9170_save_pci_dev: dev[118]=710011
[    1.235442] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.235445] marvell_9170_save_pci_dev: dev[184]=0
[    1.235448] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.235451] marvell_9170_save_pci_dev: dev[18c]=0
[    1.235453] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.235454] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.235456] marvell_9170_save_pci_dev: dev[198]=710011
[    1.236340] scsi host6: ahci
[    1.237684] scsi host7: ahci
[    1.237806] ata7: SATA max UDMA/133 abar m512@0xdfd10000 port 0xdfd10100 irq 90
[    1.237811] ata8: SATA max UDMA/133 abar m512@0xdfd10000 port 0xdfd10180 irq 90
[    1.237860] do_marvell_9170_recover: still booting
[    1.238044] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.238051] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.238097] do_marvell_9170_recover: start_engine() called for PCI#4 port 0
[    1.238099] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.238103] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238106] marvell_9170_save_pci_dev: pci[c]=10
[    1.238109] marvell_9170_save_pci_dev: pci[10]=d041
[    1.238112] marvell_9170_save_pci_dev: pci[14]=d031
[    1.238115] marvell_9170_save_pci_dev: pci[18]=d021
[    1.238118] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.238121] marvell_9170_save_pci_dev: pci[20]=d001
[    1.238125] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.238128] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.238131] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.238134] marvell_9170_save_pci_dev: pci[44]=0
[    1.238137] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238140] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238143] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.238146] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238149] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238152] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238154] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.238157] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.238160] marvell_9170_save_pci_dev: dev[104]=0
[    1.238163] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.238165] marvell_9170_save_pci_dev: dev[10c]=0
[    1.238167] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238169] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238171] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238174] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.238177] marvell_9170_save_pci_dev: dev[184]=0
[    1.238180] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.238182] marvell_9170_save_pci_dev: dev[18c]=0
[    1.238184] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238186] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.238188] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238190] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.238193] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238196] marvell_9170_save_pci_dev: pci[c]=10
[    1.238199] marvell_9170_save_pci_dev: pci[10]=c041
[    1.238202] marvell_9170_save_pci_dev: pci[14]=c031
[    1.238205] marvell_9170_save_pci_dev: pci[18]=c021
[    1.238208] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.238211] marvell_9170_save_pci_dev: pci[20]=c001
[    1.238214] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.238217] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.238220] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.238223] marvell_9170_save_pci_dev: pci[44]=0
[    1.238226] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238229] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238232] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.238236] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238239] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238242] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238244] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.238246] marvell_9170_save_pci_dev: dev[100]=76cc0000
[    1.238249] marvell_9170_save_pci_dev: dev[104]=0
[    1.238252] marvell_9170_save_pci_dev: dev[108]=76cc0400
[    1.238255] marvell_9170_save_pci_dev: dev[10c]=0
[    1.238257] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238258] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238260] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238263] marvell_9170_save_pci_dev: dev[180]=98500
[    1.238266] marvell_9170_save_pci_dev: dev[184]=0
[    1.238269] marvell_9170_save_pci_dev: dev[188]=98540
[    1.238271] marvell_9170_save_pci_dev: dev[18c]=0
[    1.238273] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238275] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.238277] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238319] do_marvell_9170_recover: start_engine() called for PCI#4 port 1
[    1.238320] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.238324] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238327] marvell_9170_save_pci_dev: pci[c]=10
[    1.238330] marvell_9170_save_pci_dev: pci[10]=d041
[    1.238333] marvell_9170_save_pci_dev: pci[14]=d031
[    1.238336] marvell_9170_save_pci_dev: pci[18]=d021
[    1.238339] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.238342] marvell_9170_save_pci_dev: pci[20]=d001
[    1.238345] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.238348] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.238351] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.238354] marvell_9170_save_pci_dev: pci[44]=0
[    1.238357] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238360] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238363] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.238366] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238369] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238372] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238374] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.238377] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.238380] marvell_9170_save_pci_dev: dev[104]=0
[    1.238382] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.238385] marvell_9170_save_pci_dev: dev[10c]=0
[    1.238387] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238389] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238391] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238394] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.238396] marvell_9170_save_pci_dev: dev[184]=0
[    1.238399] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.238402] marvell_9170_save_pci_dev: dev[18c]=0
[    1.238404] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238406] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.238416] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238418] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.238422] marvell_9170_save_pci_dev: pci[4]=100407
[    1.238425] marvell_9170_save_pci_dev: pci[c]=10
[    1.238428] marvell_9170_save_pci_dev: pci[10]=c041
[    1.238431] marvell_9170_save_pci_dev: pci[14]=c031
[    1.238434] marvell_9170_save_pci_dev: pci[18]=c021
[    1.238437] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.238440] marvell_9170_save_pci_dev: pci[20]=c001
[    1.238443] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.238446] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.238449] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.238452] marvell_9170_save_pci_dev: pci[44]=0
[    1.238455] marvell_9170_save_pci_dev: pci[50]=17005
[    1.238458] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.238461] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.238464] marvell_9170_save_pci_dev: pci[78]=92027
[    1.238467] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.238470] marvell_9170_save_pci_dev: pci[a0]=2
[    1.238472] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.238475] marvell_9170_save_pci_dev: dev[100]=76cc0000
[    1.238478] marvell_9170_save_pci_dev: dev[104]=0
[    1.238480] marvell_9170_save_pci_dev: dev[108]=76cc0400
[    1.238483] marvell_9170_save_pci_dev: dev[10c]=0
[    1.238485] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.238487] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.238489] marvell_9170_save_pci_dev: dev[118]=710011
[    1.238492] marvell_9170_save_pci_dev: dev[180]=76ce0000
[    1.238494] marvell_9170_save_pci_dev: dev[184]=0
[    1.238497] marvell_9170_save_pci_dev: dev[188]=76ce0400
[    1.238500] marvell_9170_save_pci_dev: dev[18c]=0
[    1.238502] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.238504] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.238506] marvell_9170_save_pci_dev: dev[198]=710011
[    1.238878] do_marvell_9170_recover: still booting
[    1.241017] scsi host8: ahci
[    1.241243] scsi host9: ahci
[    1.241330] ata9: SATA max UDMA/133 abar m512@0xdfb10000 port 0xdfb10100 irq 91
[    1.241335] ata10: SATA max UDMA/133 abar m512@0xdfb10000 port 0xdfb10180 irq 91
[    1.241624] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    1.241758] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.241836] tun: Universal TUN/TAP device driver, 1.6
[    1.241839] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.241958] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.241964] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.242009] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.242012] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.242044] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    1.242047] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.523844] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.523856] ata2: SATA link down (SStatus 0 SControl 300)
[    1.525850] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.525863] ata4: SATA link down (SStatus 0 SControl 300)
[    1.525879] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.525888] ata1: SATA link down (SStatus 0 SControl 300)
[    1.527853] do_marvell_9170_recover: ignoring PCI device (8086:1f22) at PCI#0
[    1.527863] ata3: SATA link down (SStatus 0 SControl 300)
[    1.541830] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.541838] ata6: SATA link down (SStatus 0 SControl 300)
[    1.542833] do_marvell_9170_recover: start_engine() called for PCI#2 port 0
[    1.542837] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.542842] marvell_9170_save_pci_dev: pci[4]=100407
[    1.542845] marvell_9170_save_pci_dev: pci[c]=10
[    1.542848] marvell_9170_save_pci_dev: pci[10]=d041
[    1.542851] marvell_9170_save_pci_dev: pci[14]=d031
[    1.542854] marvell_9170_save_pci_dev: pci[18]=d021
[    1.542857] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.542860] marvell_9170_save_pci_dev: pci[20]=d001
[    1.542864] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.542867] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.542870] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.542873] marvell_9170_save_pci_dev: pci[44]=0
[    1.542876] marvell_9170_save_pci_dev: pci[50]=17005
[    1.542879] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.542882] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.542885] marvell_9170_save_pci_dev: pci[78]=92027
[    1.542888] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.542891] marvell_9170_save_pci_dev: pci[a0]=2
[    1.542893] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.542896] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.542899] marvell_9170_save_pci_dev: dev[104]=0
[    1.542902] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.542904] marvell_9170_save_pci_dev: dev[10c]=0
[    1.542906] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.542908] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.542910] marvell_9170_save_pci_dev: dev[118]=710011
[    1.542913] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.542916] marvell_9170_save_pci_dev: dev[184]=0
[    1.542919] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.542921] marvell_9170_save_pci_dev: dev[18c]=0
[    1.542923] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.542925] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.542927] marvell_9170_save_pci_dev: dev[198]=710011
[    1.542929] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.542932] marvell_9170_save_pci_dev: pci[4]=100407
[    1.542935] marvell_9170_save_pci_dev: pci[c]=10
[    1.542938] marvell_9170_save_pci_dev: pci[10]=c041
[    1.542941] marvell_9170_save_pci_dev: pci[14]=c031
[    1.542944] marvell_9170_save_pci_dev: pci[18]=c021
[    1.542947] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.542950] marvell_9170_save_pci_dev: pci[20]=c001
[    1.542953] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.542957] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.542960] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.542963] marvell_9170_save_pci_dev: pci[44]=0
[    1.542966] marvell_9170_save_pci_dev: pci[50]=17005
[    1.542969] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.542972] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.542975] marvell_9170_save_pci_dev: pci[78]=92027
[    1.542978] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.542981] marvell_9170_save_pci_dev: pci[a0]=2
[    1.542983] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.542986] marvell_9170_save_pci_dev: dev[100]=76cc0000
[    1.542988] marvell_9170_save_pci_dev: dev[104]=0
[    1.542991] marvell_9170_save_pci_dev: dev[108]=76cc0400
[    1.542994] marvell_9170_save_pci_dev: dev[10c]=0
[    1.542996] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.542998] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.543000] marvell_9170_save_pci_dev: dev[118]=710011
[    1.543002] marvell_9170_save_pci_dev: dev[180]=76ce0000
[    1.543005] marvell_9170_save_pci_dev: dev[184]=0
[    1.543008] marvell_9170_save_pci_dev: dev[188]=76ce0400
[    1.543011] marvell_9170_save_pci_dev: dev[18c]=0
[    1.543013] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.543014] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.543016] marvell_9170_save_pci_dev: dev[198]=710011
[    1.543027] ata7: SATA link down (SStatus 0 SControl 300)
[    1.543844] do_marvell_9170_recover: ignoring PCI device (8086:1f32) at PCI#0
[    1.543850] do_marvell_9170_recover: start_engine() called for PCI#2 port 1
[    1.543854] ata5: SATA link down (SStatus 0 SControl 300)
[    1.543856] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.543861] marvell_9170_save_pci_dev: pci[4]=100407
[    1.543865] marvell_9170_save_pci_dev: pci[c]=10
[    1.543868] marvell_9170_save_pci_dev: pci[10]=d041
[    1.543871] marvell_9170_save_pci_dev: pci[14]=d031
[    1.543874] marvell_9170_save_pci_dev: pci[18]=d021
[    1.543877] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.543880] marvell_9170_save_pci_dev: pci[20]=d001
[    1.543883] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.543887] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.543890] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.543893] marvell_9170_save_pci_dev: pci[44]=0
[    1.543896] marvell_9170_save_pci_dev: pci[50]=17005
[    1.543899] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.543902] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.543905] marvell_9170_save_pci_dev: pci[78]=92027
[    1.543908] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.543911] marvell_9170_save_pci_dev: pci[a0]=2
[    1.543913] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.543916] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.543919] marvell_9170_save_pci_dev: dev[104]=0
[    1.543922] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.543924] marvell_9170_save_pci_dev: dev[10c]=0
[    1.543926] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.543928] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.543930] marvell_9170_save_pci_dev: dev[118]=710011
[    1.543933] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.543936] marvell_9170_save_pci_dev: dev[184]=0
[    1.543938] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.543941] marvell_9170_save_pci_dev: dev[18c]=0
[    1.543943] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.543945] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.543947] marvell_9170_save_pci_dev: dev[198]=710011
[    1.543949] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.543952] marvell_9170_save_pci_dev: pci[4]=100407
[    1.543955] marvell_9170_save_pci_dev: pci[c]=10
[    1.543958] marvell_9170_save_pci_dev: pci[10]=c041
[    1.543961] marvell_9170_save_pci_dev: pci[14]=c031
[    1.543964] marvell_9170_save_pci_dev: pci[18]=c021
[    1.543967] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.543970] marvell_9170_save_pci_dev: pci[20]=c001
[    1.543973] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.543976] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.543979] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.543982] marvell_9170_save_pci_dev: pci[44]=0
[    1.543985] marvell_9170_save_pci_dev: pci[50]=17005
[    1.543988] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.543991] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.543994] marvell_9170_save_pci_dev: pci[78]=92027
[    1.543998] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.544001] marvell_9170_save_pci_dev: pci[a0]=2
[    1.544002] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.544005] marvell_9170_save_pci_dev: dev[100]=76cc0000
[    1.544008] marvell_9170_save_pci_dev: dev[104]=0
[    1.544011] marvell_9170_save_pci_dev: dev[108]=76cc0400
[    1.544013] marvell_9170_save_pci_dev: dev[10c]=0
[    1.544015] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.544017] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.544019] marvell_9170_save_pci_dev: dev[118]=710011
[    1.544022] marvell_9170_save_pci_dev: dev[180]=76ce0000
[    1.544025] marvell_9170_save_pci_dev: dev[184]=0
[    1.544027] marvell_9170_save_pci_dev: dev[188]=76ce0400
[    1.544030] marvell_9170_save_pci_dev: dev[18c]=0
[    1.544032] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.544034] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.544036] marvell_9170_save_pci_dev: dev[198]=710011
[    1.544047] ata8: SATA link down (SStatus 0 SControl 300)
[    1.545866] do_marvell_9170_recover: start_engine() called for PCI#4 port 0
[    1.545870] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.545874] marvell_9170_save_pci_dev: pci[4]=100407
[    1.545878] marvell_9170_save_pci_dev: pci[c]=10
[    1.545881] marvell_9170_save_pci_dev: pci[10]=d041
[    1.545884] marvell_9170_save_pci_dev: pci[14]=d031
[    1.545887] marvell_9170_save_pci_dev: pci[18]=d021
[    1.545890] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.545893] marvell_9170_save_pci_dev: pci[20]=d001
[    1.545896] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.545899] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.545903] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.545906] marvell_9170_save_pci_dev: pci[44]=0
[    1.545909] marvell_9170_save_pci_dev: pci[50]=17005
[    1.545912] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.545915] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.545918] marvell_9170_save_pci_dev: pci[78]=92027
[    1.545921] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.545924] marvell_9170_save_pci_dev: pci[a0]=2
[    1.545926] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.545929] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.545932] marvell_9170_save_pci_dev: dev[104]=0
[    1.545935] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.545937] marvell_9170_save_pci_dev: dev[10c]=0
[    1.545939] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.545941] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.545943] marvell_9170_save_pci_dev: dev[118]=710011
[    1.545946] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.545949] marvell_9170_save_pci_dev: dev[184]=0
[    1.545951] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.545954] marvell_9170_save_pci_dev: dev[18c]=0
[    1.545956] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.545958] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.545960] marvell_9170_save_pci_dev: dev[198]=710011
[    1.545962] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.545965] marvell_9170_save_pci_dev: pci[4]=100407
[    1.545968] marvell_9170_save_pci_dev: pci[c]=10
[    1.545971] marvell_9170_save_pci_dev: pci[10]=c041
[    1.545974] marvell_9170_save_pci_dev: pci[14]=c031
[    1.545977] marvell_9170_save_pci_dev: pci[18]=c021
[    1.545980] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.545983] marvell_9170_save_pci_dev: pci[20]=c001
[    1.545986] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.545989] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.545992] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.545995] marvell_9170_save_pci_dev: pci[44]=0
[    1.545998] marvell_9170_save_pci_dev: pci[50]=17005
[    1.546001] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.546004] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.546007] marvell_9170_save_pci_dev: pci[78]=92027
[    1.546010] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.546013] marvell_9170_save_pci_dev: pci[a0]=2
[    1.546015] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.546018] marvell_9170_save_pci_dev: dev[100]=76cc0000
[    1.546021] marvell_9170_save_pci_dev: dev[104]=0
[    1.546024] marvell_9170_save_pci_dev: dev[108]=76cc0400
[    1.546026] marvell_9170_save_pci_dev: dev[10c]=0
[    1.546028] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.546030] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.546032] marvell_9170_save_pci_dev: dev[118]=710011
[    1.546035] marvell_9170_save_pci_dev: dev[180]=76ce0000
[    1.546038] marvell_9170_save_pci_dev: dev[184]=0
[    1.546040] marvell_9170_save_pci_dev: dev[188]=76ce0400
[    1.546043] marvell_9170_save_pci_dev: dev[18c]=0
[    1.546045] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.546047] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.546049] marvell_9170_save_pci_dev: dev[198]=710011
[    1.546059] ata9: SATA link down (SStatus 0 SControl 300)
[    1.546832] do_marvell_9170_recover: start_engine() called for PCI#4 port 1
[    1.546835] do_marvell_9170_recover: saving PCI#2 and DEV
[    1.546838] marvell_9170_save_pci_dev: pci[4]=100407
[    1.546842] marvell_9170_save_pci_dev: pci[c]=10
[    1.546845] marvell_9170_save_pci_dev: pci[10]=d041
[    1.546848] marvell_9170_save_pci_dev: pci[14]=d031
[    1.546851] marvell_9170_save_pci_dev: pci[18]=d021
[    1.546854] marvell_9170_save_pci_dev: pci[1c]=d011
[    1.546857] marvell_9170_save_pci_dev: pci[20]=d001
[    1.546860] marvell_9170_save_pci_dev: pci[24]=dfd10000
[    1.546863] marvell_9170_save_pci_dev: pci[30]=dfd00000
[    1.546866] marvell_9170_save_pci_dev: pci[3c]=10b
[    1.546869] marvell_9170_save_pci_dev: pci[44]=0
[    1.546872] marvell_9170_save_pci_dev: pci[50]=17005
[    1.546876] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.546879] marvell_9170_save_pci_dev: pci[58]=41c1
[    1.546882] marvell_9170_save_pci_dev: pci[78]=92027
[    1.546885] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.546888] marvell_9170_save_pci_dev: pci[a0]=2
[    1.546890] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.546893] marvell_9170_save_pci_dev: dev[100]=76c80000
[    1.546895] marvell_9170_save_pci_dev: dev[104]=0
[    1.546898] marvell_9170_save_pci_dev: dev[108]=76c80400
[    1.546901] marvell_9170_save_pci_dev: dev[10c]=0
[    1.546903] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.546905] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.546907] marvell_9170_save_pci_dev: dev[118]=710011
[    1.546910] marvell_9170_save_pci_dev: dev[180]=76ca0000
[    1.546912] marvell_9170_save_pci_dev: dev[184]=0
[    1.546915] marvell_9170_save_pci_dev: dev[188]=76ca0400
[    1.546918] marvell_9170_save_pci_dev: dev[18c]=0
[    1.546920] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.546922] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.546924] marvell_9170_save_pci_dev: dev[198]=710011
[    1.546925] do_marvell_9170_recover: saving PCI#4 and DEV
[    1.546928] marvell_9170_save_pci_dev: pci[4]=100407
[    1.546931] marvell_9170_save_pci_dev: pci[c]=10
[    1.546934] marvell_9170_save_pci_dev: pci[10]=c041
[    1.546938] marvell_9170_save_pci_dev: pci[14]=c031
[    1.546941] marvell_9170_save_pci_dev: pci[18]=c021
[    1.546944] marvell_9170_save_pci_dev: pci[1c]=c011
[    1.546947] marvell_9170_save_pci_dev: pci[20]=c001
[    1.546950] marvell_9170_save_pci_dev: pci[24]=dfb10000
[    1.546953] marvell_9170_save_pci_dev: pci[30]=dfb00000
[    1.546956] marvell_9170_save_pci_dev: pci[3c]=1ff
[    1.546959] marvell_9170_save_pci_dev: pci[44]=0
[    1.546962] marvell_9170_save_pci_dev: pci[50]=17005
[    1.546965] marvell_9170_save_pci_dev: pci[54]=fee0f00c
[    1.546968] marvell_9170_save_pci_dev: pci[58]=41e1
[    1.546971] marvell_9170_save_pci_dev: pci[78]=92027
[    1.546974] marvell_9170_save_pci_dev: pci[80]=10120040
[    1.546977] marvell_9170_save_pci_dev: pci[a0]=2
[    1.546979] marvell_9170_save_pci_dev: dev[4]=80000002
[    1.546982] marvell_9170_save_pci_dev: dev[100]=76cc0000
[    1.546985] marvell_9170_save_pci_dev: dev[104]=0
[    1.546987] marvell_9170_save_pci_dev: dev[108]=76cc0400
[    1.546990] marvell_9170_save_pci_dev: dev[10c]=0
[    1.546992] marvell_9170_save_pci_dev: dev[110]=ffffffff
[    1.546994] marvell_9170_save_pci_dev: dev[114]=7840007f
[    1.546996] marvell_9170_save_pci_dev: dev[118]=710011
[    1.546999] marvell_9170_save_pci_dev: dev[180]=76ce0000
[    1.547001] marvell_9170_save_pci_dev: dev[184]=0
[    1.547004] marvell_9170_save_pci_dev: dev[188]=76ce0400
[    1.547007] marvell_9170_save_pci_dev: dev[18c]=0
[    1.547009] marvell_9170_save_pci_dev: dev[190]=ffffffff
[    1.547011] marvell_9170_save_pci_dev: dev[194]=7840007f
[    1.547013] marvell_9170_save_pci_dev: dev[198]=710011
[    1.547023] ata10: SATA link down (SStatus 0 SControl 300)
[    1.583699] igb 0000:00:14.0: added PHC on eth0
[    1.583704] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
[    1.583794] igb 0000:00:14.0: eth0: PBA No: 002100-000
[    1.583802] igb 0000:00:14.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    1.926675] igb 0000:00:14.1: added PHC on eth1
[    1.926681] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
[    1.926757] igb 0000:00:14.1: eth1: PBA No: 002100-000
[    1.926760] igb 0000:00:14.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.097821] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[    2.097828] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
[    2.269657] igb 0000:00:14.2: added PHC on eth2
[    2.269662] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection
[    2.269738] igb 0000:00:14.2: eth2: PBA No: 002100-000
[    2.269742] igb 0000:00:14.2: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.612698] igb 0000:00:14.3: added PHC on eth3
[    2.612704] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection
[    2.612785] igb 0000:00:14.3: eth3: PBA No: 002100-000
[    2.612789] igb 0000:00:14.3: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    2.613639] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.3.3
[    2.613641] Copyright(c) 1999 - 2017 Intel Corporation.
[    2.613878] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.3.6
[    2.613884] i40e: Copyright(c) 2013 - 2017 Intel Corporation.
[    2.613975] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[    2.618754] Fusion MPT base driver 3.04.20
[    2.618758] Copyright (c) 1999-2008 LSI Corporation
[    2.618785] Fusion MPT SAS Host driver 3.04.20
[    2.618823] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.618963] mptctl: Registered with Fusion MPT base driver
[    2.618967] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.618974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.618984] ehci-pci: EHCI PCI platform driver
[    2.619143] ehci-pci 0000:00:16.0: EHCI Host Controller
[    2.619154] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1
[    2.619171] ehci-pci 0000:00:16.0: debug port 2
[    2.623073] ehci-pci 0000:00:16.0: cache line size of 64 is not supported
[    2.623096] ehci-pci 0000:00:16.0: irq 23, io mem 0xdff37000
[    2.628861] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00
[    2.629345] hub 1-0:1.0: USB hub found
[    2.629366] hub 1-0:1.0: 8 ports detected
[    2.629724] uhci_hcd: USB Universal Host Controller Interface driver
[    2.629891] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.629901] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.690429] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000410
[    2.690931] hub 2-0:1.0: USB hub found
[    2.690956] hub 2-0:1.0: 2 ports detected
[    2.691124] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.691131] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    2.691209] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.691461] hub 3-0:1.0: USB hub found
[    2.691484] hub 3-0:1.0: 2 ports detected
[    2.691708] usbcore: registered new interface driver cdc_acm
[    2.691710] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.691736] usbcore: registered new interface driver usblp
[    2.691790] usbcore: registered new interface driver usb-storage
[    2.691854] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.930812] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.959548] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.961593] rtc_cmos 00:02: RTC can wake from S4
[    2.968086] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.969267] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[    2.969308] i2c /dev entries driver
[    2.969336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.970672] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.045597] hub 1-1:1.0: USB hub found
[    3.045813] hub 1-1:1.0: 4 ports detected
[    3.098002] clocksource: Switched to clocksource tsc
[    3.318804] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    3.405956] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    3.406203] scsi host10: usb-storage 1-1.2:1.0
[    3.976799] ismt_smbus 0000:00:13.0: completion wait timed out
[    4.982795] ismt_smbus 0000:00:13.0: completion wait timed out
[    5.988789] ismt_smbus 0000:00:13.0: completion wait timed out
[    6.994782] ismt_smbus 0000:00:13.0: completion wait timed out
[    7.001560] it87: Found IT8732F chip at 0xa30, revision 2
[    7.001606] it87: Configuring VIN3 for external sensor
[    7.001735] it87 it87.2608: Reconfiguring PWM to active high polarity
[    7.002407] md: raid0 personality registered for level 0
[    7.002412] md: raid1 personality registered for level 1
[    7.002416] md: raid10 personality registered for level 10
[    7.002733] md: raid6 personality registered for level 6
[    7.002746] md: raid5 personality registered for level 5
[    7.002749] md: raid4 personality registered for level 4
[    7.002936] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    7.003053] usbcore: registered new interface driver btusb
[    7.003140] usbcore: registered new interface driver usbhid
[    7.003142] usbhid: USB HID core driver
[    7.003298] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.003607] NET: Registered protocol family 10
[    7.004123] NET: Registered protocol family 17
[    7.004152] 8021q: 802.1Q VLAN Support v1.8
[    7.004175] Key type dns_resolver registered
[    7.004423] readynas_io_init: initializing ReadyNAS I/O.
[    7.004427] procfs_init: initializing ReadyNAS procfs.
[    7.004448] pwr_button_state_init: initializing ReadyNAS PWR button state handler for rn313x.
[    7.004472] button_init: initializing ReadyNAS button set.
[    7.004476] __button_init: button 'uid' gpio_it87:55 (POLL)
[    7.004546] __button_init: button 'reset' gpio_it87:21n (IRQ)
[    7.004682] rn_button 'reset' IRQ#45
[    7.005885] input: rn_button as /devices/virtual/input/input2
[    7.005978] readynas_io_init: initialization successfully completed.
[    7.006089] readynas_lcd_init: installing ReadyNAS LCD driver.
[    7.006188] readynas_led_init: installing ReadyNAS LED driver.
[    7.006791] register_led: registering LED "readynas:green:pwr"
[    7.006926] register_led: registering LED "readynas:red:err"
[    7.007022] register_led: registering LED "readynas:blue:uid"
[    7.007181] register_led: registering LED ".readynas::sata1_pwr"
[    7.007214] register_led: registering LED ".readynas::sata2_pwr"
[    7.007249] register_led: registering LED ".readynas::sata3_pwr"
[    7.007283] register_led: registering LED ".readynas::sata4_pwr"
[    7.007316] register_led: registering LED "readynas:green:sata1"
[    7.007349] register_led: registering LED "readynas:green:sata2"
[    7.007386] register_led: registering LED "readynas:green:sata3"
[    7.007422] register_led: registering LED "readynas:green:sata4"
[    7.007455] register_led: registering LED "readynas:red:sata1"
[    7.007493] register_led: registering LED "readynas:red:sata2"
[    7.007530] register_led: registering LED "readynas:red:sata3"
[    7.007565] register_led: registering LED "readynas:red:sata4"
[    7.007781] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x122
[    7.007790] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x122
[    7.007802] microcode: CPU2 sig=0x406d8, pf=0x1, revision=0x122
[    7.007814] microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x122
[    7.007890] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.007913] SSE version of gcm_enc/dec engaged.
[    7.013496] registered taskstats version 1
[    7.014883] Btrfs loaded, crc32c=crc32c-intel
[    7.016341] rtc_cmos 00:02: setting system clock to 2021-08-14 15:16:25 UTC (1628954185)
[    7.017848] ALSA device list:
[    7.017853]   No soundcards found.
[    7.018515] Freeing unused kernel memory: 856K
[    7.026878] vpd: module license 'Proprietary' taints kernel.
[    7.026884] Disabling lock debugging due to kernel taint
[    7.027028] ReadyNAS VPD init
[    8.418666] scsi 10:0:0:0: Direct-Access              USB DISK MODULE  PMAP PQ: 0 ANSI: 4
[    8.419180] sd 10:0:0:0: Attached scsi generic sg0 type 0
[    8.420516] sd 10:0:0:0: [sda] 497664 512-byte logical blocks: (255 MB/243 MiB)
[    8.424255] sd 10:0:0:0: [sda] Write Protect is off
[    8.424261] sd 10:0:0:0: [sda] Mode Sense: 23 00 00 00
[    8.428001] sd 10:0:0:0: [sda] No Caching mode page found
[    8.434051] sd 10:0:0:0: [sda] Assuming drive cache: write through
[    8.452260]  sda: sda1
[    8.460880] sd 10:0:0:0: [sda] Attached SCSI removable disk
[   23.091697] random: nonblocking pool is initialized
[   66.321169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   66.321175] 8021q: adding VLAN 0 to HW filter on device eth0
[   66.665111] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   66.665114] 8021q: adding VLAN 0 to HW filter on device eth1
[   67.009166] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   67.009172] 8021q: adding VLAN 0 to HW filter on device eth2
[   67.353154] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   67.353161] 8021q: adding VLAN 0 to HW filter on device eth3
[   69.202723] igb 0000:00:14.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   69.202850] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
# 
Processes>>

# ps
  PID USER       VSZ STAT COMMAND
    1 root     22752 S    /init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    5 root         0 SW<  [kworker/0:0H]
    6 root         0 SW   [kworker/u8:0]
    7 root         0 SW   [rcu_sched]
    8 root         0 SW   [rcu_bh]
    9 root         0 SW   [migration/0]
   10 root         0 SW   [watchdog/0]
   11 root         0 SW   [watchdog/1]
   12 root         0 SW   [migration/1]
   13 root         0 SW   [ksoftirqd/1]
   14 root         0 SW   [kworker/1:0]
   15 root         0 SW<  [kworker/1:0H]
   16 root         0 SW   [watchdog/2]
   17 root         0 SW   [migration/2]
   18 root         0 SW   [ksoftirqd/2]
   19 root         0 SW   [kworker/2:0]
   20 root         0 SW<  [kworker/2:0H]
   21 root         0 SW   [watchdog/3]
   22 root         0 SW   [migration/3]
   23 root         0 SW   [ksoftirqd/3]
   24 root         0 SW   [kworker/3:0]
   25 root         0 SW<  [kworker/3:0H]
   26 root         0 SW   [kdevtmpfs]
   27 root         0 SW<  [netns]
   28 root         0 SW   [kworker/u8:1]
   30 root         0 SW<  [perf]
   45 root         0 SW   [kworker/u8:2]
   69 root         0 SW   [kworker/u8:3]
  384 root         0 SW   [kworker/u8:4]
  391 root         0 SW   [khungtaskd]
  392 root         0 SW<  [writeback]
  394 root         0 SW<  [crypto]
  395 root         0 SW<  [bioset]
  397 root         0 SW<  [kblockd]
  511 root         0 SW<  [md]
  611 root         0 SW<  [rpciod]
  612 root         0 SW   [kworker/1:1]
  613 root         0 SW   [kworker/0:1]
  642 root         0 SW   [kswapd0]
  643 root         0 SW<  [vmstat]
  719 root         0 SW   [fsnotify_mark]
  733 root         0 SW<  [nfsiod]
  739 root         0 SW<  [cifsiod]
  775 root         0 SW<  [kthrotld]
  796 root         0 SW<  [acpi_thermal_pm]
  815 root         0 SW<  [bioset]
  818 root         0 SW<  [bioset]
  821 root         0 SW<  [bioset]
  824 root         0 SW<  [bioset]
  827 root         0 SW<  [bioset]
  830 root         0 SW<  [bioset]
  833 root         0 SW<  [bioset]
  836 root         0 SW<  [bioset]
  861 root         0 SW<  [nvme]
  879 root         0 SW   [scsi_eh_0]
  880 root         0 SW<  [scsi_tmf_0]
  883 root         0 SW   [scsi_eh_1]
  884 root         0 SW<  [scsi_tmf_1]
  887 root         0 SW   [scsi_eh_2]
  888 root         0 SW<  [scsi_tmf_2]
  891 root         0 SW   [scsi_eh_3]
  892 root         0 SW<  [scsi_tmf_3]
  895 root         0 SW   [kworker/u8:5]
  898 root         0 SW   [kworker/u8:6]
  903 root         0 SW   [scsi_eh_4]
  904 root         0 SW<  [scsi_tmf_4]
  907 root         0 SW   [scsi_eh_5]
  908 root         0 SW<  [scsi_tmf_5]
  911 root         0 SW   [kworker/u8:7]
  912 root         0 SW   [scsi_eh_6]
  914 root         0 SW   [kworker/u8:8]
  920 root         0 SW<  [scsi_tmf_6]
  923 root         0 SW   [scsi_eh_7]
  924 root         0 SW<  [scsi_tmf_7]
  927 root         0 SW   [scsi_eh_8]
  928 root         0 SW   [kworker/u8:9]
  930 root         0 SW<  [scsi_tmf_8]
  938 root         0 SW   [scsi_eh_9]
  939 root         0 SW<  [scsi_tmf_9]
  942 root         0 SW   [kworker/u8:10]
  943 root         0 SW<  [target_completi]
  944 root         0 SW<  [tmr-rd_mcp]
  945 root         0 SW<  [xcopy_wq]
  946 root         0 SW   [kworker/u8:11]
 1028 root         0 SW<  [ixgbe]
 1029 root         0 SW<  [i40e]
 1032 root         0 SW<  [bnx2x]
 1033 root         0 SW<  [bnx2x_iov]
 1040 root         0 SW   [kworker/3:1]
 1045 root         0 SW   [kworker/2:1]
 1059 root         0 SW   [kworker/2:2]
 1063 root         0 SW   [kworker/2:3]
 1081 root         0 SW   [scsi_eh_10]
 1082 root         0 SW<  [scsi_tmf_10]
 1083 root         0 SW   [usb-storage]
 1096 root         0 SW<  [raid5wq]
 1100 root         0 SW<  [dm_bufio_cache]
 1112 root         0 SW<  [ipv6_addrconf]
 1120 root         0 SW   [readynas-button]
 1131 root         0 SW   [readynas-led]
 1173 root         0 SW<  [bioset]
 1178 root         0 SW<  [deferwq]
 1194 root         0 SW   [kworker/1:2]
 1195 root         0 SW<  [bioset]
 1258 root         0 SW   [kworker/0:2]
 1291 root      4904 S    raidard
 1299 root      3116 S    ifplugd -i eth1
 1302 root      3116 S    ifplugd -i eth2
 1305 root      3116 S    ifplugd -i eth3
 1374 root         0 SW<  [kworker/1:1H]
 1376 root      3100 S    telnetd
 1388 root     29300 S    rnutil remote_access -b
 1390 root      3108 S    /bin/sh -c /sbin/getty 115200 console vt100
 1392 root      3120 S    -sh
 1393 root      7160 S    {dropbearmulti} dropbear -EFs -p 127.0.0.1:1022
 1394 root      7172 S    {dropbearmulti} dbclient -T -K 60 -p 443 -R *:64200:
 1399 root      3104 R    ps
# 
Filesystems>>

# lsblk
-sh: lsblk: not found
# mount
rootfs on / type rootfs (rw,size=1999292k,nr_inodes=499823)
proc on /proc type proc (rw,noatime,nodiratime)
sysfs on /sys type sysfs (rw,noatime,nodiratime)
udev on /dev type devtmpfs (rw,noatime,nodiratime,size=10240k,nr_inodes=499828,mode=755)
devpts on /dev/pts type devpts (rw,noatime,nodiratime,mode=600,ptmxmode=000)
# df -h
Filesystem                Size      Used Available Use% Mounted on
udev                     10.0M         0     10.0M   0% /dev
# 

Notes

Memory

The NAS is an ordinary Intel PC with the motherboard hosting two DDR3 SDRAM slots supporting up to 16 GB in total of DDR3-1600 (PC3-12800) memory. The maximum size of a single modules seems to be limited to 8 GB.

Additionally the mainboard contains two unpopulated SATA connectors which can be used to install additional two SFF hard disks:

Netgear-RN3138-Extra 2 SFF disks.jpg

Power Supply

The power supply is an FSP GROUP GSP180-50LH. The power rails provided are:

Power Supply voltage rails
+3.3V +5V +12V +5Vsb -12V
10.0A 14.0A 10.0A 2.5A 0.3A

+3.3V and +5V can source 80W maximum in total. The maximum total continuous output power is 180W.

Pictures

Retail Images
User Images

Mods

A number of mods has been documented for this device, see "Mods" here: https://pop.fsck.pl/hardware/netgear-rn3138.html