Netgear EVG2000

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
BigPond Velocity Home Network Gateway
Homepage
Wikipedia
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
Netgear EVG2000
FCC ID
none specified
Type
wireless router, dsl modem, analog phone gateway
CPU1
Broadcom BCM6369
CPU1 Type
MIPS BMIPS4350
CPU1 Speed
not specified ( 2 cores )
Flash1 Chip
Macronix MX29GL128ELT2I-90G
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Nanya NT5DS8M16FS-5T x 2
ETH chip1
Broadcom BCM6369
Switch
Broadcom BCM53115
Ethernet Port Count
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: 20:4E:7F (16 E, 16 W)
Ethernet OUI: 20:4E:7F (16 E, 16 W)

Expansion IF types
USB 2.0
USB ports
2
USB Hub Compatible
Untested
Power
12 VDC, 2.5 A
Connector type
barrel
Flags:
VDSL2
Other
Manuf/OEM/ODM
Foxconn U12H154T80
Retail
(Est.) release date 2011
Country of manuf China
Radio 1
Chip1
Broadcom BCM4322
Wireless interface OUI
20:4E:7F
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
16

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Netgear device with specifications, see Netgear.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

EVG2000-BPAUS (Telstra) TA "100-14583-01R12" S/N "28E10274003F0" ebay

  • This product was produced for a select few ISPs for use with their service.
It would appear the device is currently used by Telstra (Australia), Optus (Australia), and Tele2 (Europe).

The default IP, login credentials, SSID, and everything else will depend on the device's branding.

  • For Tele2..
The default IP is 192.168.0.1
The default login credentials are admin:tele2
The default SSID format is Tele2GatewayXXXX
The default IP is 10.0.0.138
The default login credentials are admin:admin
The default SSID format is BigPondXXXX
Per WiGLE, upper case hex digits are used.
There does not seem to be a relation between the digits and the BSSID.

Links of Interest

EVG834N on SpeedGuide.net

Per the images below and other sources, this device is using...

  • Broadcom BCM6369KPBG SoC @400MHz (BMIPS4350 v3.1)
  • Macronix MX29GL128ELT2I-90G 16 MB Flash chip
  • either 2x Nanya NT5DS8M16FS-5T RAM chips (16 MB each, 32 MB total)
or 2x Winbond W9425G6JH-5 RAM chips (32 MB each, 64 MB total) (per the OpenWrt Wiki)
  • Broadcom BCM4322LKFBG 802.11n Wi-Fi radio
  • Broadcom BCM53115SKFBG GbE Switch chip
  • 2x Silicon Labs Si3210-FM (Si3210) ProSLIC SLIC/Codec (VoIP)
  • 20:4E:7F OUI

Pictures

User Images

-->