Loopcomm LP-8696C

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
wireless router
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Loopcomm LP-8696C
FCC ID
Type
wireless router
CPU1
CPU1 Type
Lexra RLX4181
CPU1 Speed
390 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Switch
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Flags:
schematics
Other

Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 155 additional devices
of which 5 are Loopcomm devices

Retail
FCC approval date 07 December 2010
Radio 1
Chip1
Realtek RTL8192CE
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Loopcomm device with specifications, see Loopcomm.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"LPC0014 REV:2.1" is silkscreened on the board in the FCC photos.

Default crendentials are defined from the FCC submitted manual.

Probable 00:1A:EF (Loopcomm) OUI (on FCC MAC label)

Probably: source

  • RTK 8196C + 8192CE
  • Winbond W25Q16BV - 16M-bit/2MB Flash
  • zentel A3V28S40ETP-G6 - 16MB Ram