Linksys WTR54GS v1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
Wireless-G Travel Router with SpeedBooster
Linksys WTR54GS.jpg
Support
Wikipedia
InfoDepot Wiki
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Linksys WTR54GS v1.0
Serial number prefix
SJH0
FCC ID
Type
wireless router
CPU1
CPU1 Type
MIPS3300
CPU1 Speed
200 MHz
Flash1 Chip
Macronix MX29LV320ABTC-90
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Parallel)
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
ICSI IC42S32400-7T
ETH chip1
Ethernet Port Count
1-100MbE-WAN
1-100MbE-LAN
Wired Standard
IEEE 802.3/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
? VAC ~ ? Hz, ? A
Connector type
AC (direct)
Other

Default IP address: 192.168.16.1
the IP 192.168.16.1 is used by 8 additional devices
of which 1 are Linksys devices

Manuf/OEM/ODM
3rd Party Firmware Support
DD-WRT • (List)
Retail
FCC approval date 26 May 2005
Radio 1
Chip1
Chip2
Broadcom BCM2050
Wireless interface OUI
none specified
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
7
 FCC ID
Linksys WTR54GS v2.0Q87-WTR54GS
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Linksys WTR54GS v1BroadcomBroadcomBroadcom
Linksys WTR54GS v2.0BroadcomBroadcomBroadcom
Linksys WTR54GS v2.1BroadcomBroadcomBroadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Linksys device with specifications, see Linksys.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

WTR54GS v1.0 devices have serial numbers starting with SJH0. But per the DD-WRT forums, some UK v2.0 models may also have the same serial prefix.

"4900QZ00D" is silkscreened on the board in the FCC photos.

Links of Interest

WTR54GS on the DD-WRT wiki

On the DD-WRT forums

WRT54G series on Wikipedia

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = v24 rc5 - build 8246

- download and install Sercomm utility
- download and unzip WTR upgrade file
-- for v1: WTRv1_sercomm.zip
-- for v2 and v2.1: WTRv2x_sercomm.zip
- download latest
-- for v1: RC5 mini or RC5 nokaid
-- for v2 and v2.1: RC5 micro
- download Linksys TFTP utility

  1. Set your PC's IP to 192.168.16.10
  2. Log into WTR at 192.168.16.1, password: admin
  3. Go to: Administration -> Factory defaults -> "Restore factory Defaults"
  4. Click "Continue"
  5. Close your browser window
  6. Set your PC's IP to 192.168.1.10
  7. Start Sercomm "Upgrade Utility"
  8. Select your ethernet adapter
  9. Press "Browse target" button
  10. MAC of your WTR will apear in "Devices List"
  11. Press "Files", select: for v1: WTRv1_sercomm.bin; for v2 and v2.1: WTRv2x_sercomm.bin, press OK
  12. Press "Upgrade", wait until upgrade completes, press OK
  13. Important: WAIT ANOTHER 3 MINUTES
  14. Start ping to 192.168.1.1 -t
  15. When reply with TTL=100, start tftp (command line or Linksys TFTP utility), transfer RC5 mini or nokaid for v1, for v2 & v2.1 you can only use RC5 micro.
  16. Observe ping, when TTL=64, you have dd-wrt installed.
  17. CONGRATULATIONS!

Pictures

User Images