(c)Copyright Realtek, Inc. 2003
Project ROME LOADER
Version 00.00.18(uClinux) (Jun 16 2005 15:35:49)
LDR version 1.00.04 for identification
[865xB] CPU Clock Rate: 200MHz, Memory Clock Rate: 130MHz
AMD/Fujitsu Standard CFI Query Table v1.3 at 0x0040
Detected flash size: total 8MB.
SDRAM size: 32MB
+TFTP +Auto UART +Bank1:ROM
Here we try to capture the default reset button: None.
--== Loader Menu ==--
'r' to update run image
'a' to change config
'l' to update loader
'g' to load run image without updating Flash
'o' to update flash with ROM file
's' to test SDRAM memory
't' to test flash memory
'e' to erase flash memory
'i' to test led on/off
Loading runtime image ...
Unzip image from address: 0xbe020000
Start runtime image at 80000400.
************************************
Powered by Realtek RTL8651B SoC, rev 1
************************************
SDRAM size: 32MB
CPU revision is: 0000ff00
Init MMU (16 entries)
Primary instruction cache 0kB, linesize 0 bytes.
Primary data cache 0kB, linesize 0 bytes.
Linux version 2.4.26-uc0 (shixiang@compile-server)
(gcc version 3.3.3) #423 Wed Mar 28 13:33:22 CST 2007
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
NOFS reserved @ 0x802e11d0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock4
IRR(0)=c0000000
Calibrating delay loop... 199.06 BogoMIPS
Memory: 29456k/32768k available (2395k kernel code,
3312k reserved, 108k data, 104k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
NEW PCI Driver...isLinuxCompliantEndianMode=False(Big Endian)
Found Airgo PCI, function=0!
Memory Space 0 data=0xfffe0000 size=0x20000
Memory Space 1 data=0xfff80000 size=0x80000
PCI device exists: slot 0 function 0 VendorID 17cb DeviceID 2 bbd40000
Found Airgo PCI, function=1!
Found Airgo PCI, function=2!
Found Airgo PCI, function=3!
Found Airgo PCI, function=4!
Found Airgo PCI, function=5!
Found Airgo PCI, function=6!
Found Airgo PCI, function=7!
memory mapping BAnum=0 slot=0 func=0
memory mapping BAnum=1 slot=0 func=0
assign mem base 1bf00000~1bf7ffff at bbd40014 size=524288
assign mem base 1bf80000~1bf9ffff at bbd40010 size=131072
Find Total 1 PCI functions
Found 00:00 [17cb/0002] 000200 00
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SERIAL_PCI enabled
Probing RTL8651 home gateway controller...
chip name: 8651B, chip revid: 1
===> Request IRQ 6 for eth0, ret=0
PPP generic driver version 2.4.2
PPP BSD Compression module registered
flash device: 7e0000 at be000000
AMD/Fujitsu Standard CFI Query Table v1.3 at 0x0040
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00006000 : "boot1"
0x00010000-0x00020000 : "boot2"
0x00000000-0x00800000 : "boot3"
0x00020000-0x00120000 : "kernel"
0x00120000-0x00800000 : "rootfs"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
GRE over IPv4 tunneling driver
ip_conntrack version 2.1 (256 buckets, 2048 max) - 344 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 104k freed
Bad boy: serial (at 0x8009d9fc) called us without a dev_id!
IRR(4)=c0c40000
===> Request IRQ 4 for serial, ret=0
BusyBox v1.00-pre2 (2006.04.07-04:21+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
# System initializing...AMD/Fujitsu Standard CFI Query Table v1.3 at 0x0040
cfgmgr_integrityCheck: ok
cfgmgr_init: romeCfgParam size: 24232(0x5ea8)
cfgmgr_init: pRomeCfgParam addr: 715853824(0x2aab1000)
rtl8651_user_pid set to 18
AMD/Fujitsu Standard CFI Query Table v1.3 at 0x0040
cfg wan toAMD/Fujitsu Standard CFI Query Table v1.3 at 0x0040
dhcp client ...
pRomeCfgParam->ifCfgParam[0].mtu =1500
Set IGMP Default Upstream interface (eth0) ... SUCCESS!!
info, client (v0.9.9-pre) started
dhcpc client deconfig
ifCfgParam[0].ipAddr: 0.0.0.0
ifCfgParam[0].ipMask: 0.0.0.0
ifCfgParam[0].gwAddr: 0.0.0.0
ifCfgParam[0].dnsPrimaryAddr: 0.0.0.0
ifCfgParam[0].dnsSecondaryAddr: 0.0.0.0
ifCfgParam[0].winsPrimaryAddr: 0.0.0.0
ifCfgParam[0].winsSecondaryAddr: 0.0.0.0
rtl8651_delNaptMapping: ret -6
rtl8651_delRoute(default): ret -3
rtl8651_delIpIntf: ret -2710
Using /lib/modules/2.4.26-uc0/kernel/drivers/net/led/led.o
PPPoE Passthru disabled.
Drop Unknown PPPoE PADT disabled.
IPv6 Passthru disabled.
killall: upnp: no process killed
/proc/sys/net/ipv4/ip_masq_udp_dloose: No such file or directory
target 239.0.0.0
SIOCDELRT: No such process
Using /lib/modules/2.4.26-uc0/kernel/drivers/net/askey/airgo/ccd.o
Using /lib/modules/2.4.26-uc0/kernel/drivers/net/askey/airgo/wns_mod.o
Using /lib/modules/2.4.26-uc0/kernel/drivers/net/askey/airgo/pol_nosdram.o
debug, Sending discover...
debug, Sending discover...
CPU: LX5280@ 2001340 cycles/jiffies
plm probe (plm_dump_buf @ C0029060)
np->hif_regs->bus_slave.hif_ctrl.val 00000000
np->hif_regs->bus_slave.hif_ctrl.val 000000C0
wlan0: PCI Revision = 1, Slot Name[00:00.0], Slot#[0]
wlan0: at BAR0 = 0xbbf80000, BAR1 = 0xbbf00000, IRQ 5.
IRR(5)=c0c40000
===> Request IRQ 5 for wlan0, ret=0
Register shadow 18
ccd_msg_handler_shadow 18 2 C002A4C0
find_pid_by_name(): 0
ssid=linksys
aniSdkSetSsid sintStatus =0
aniSdkSetSuppressSsid sintStatus =0
aniSdkSetBeaconParam sintStatus =0
aniSdkSetDot11MacParam sintStatus =0
aniSdkSetNwkDensity sintStatus =0
aniSdkSetRadioPersona
debug, Sending discover...
aniSdkSetWorldMode
Error: can' get ,48! ken debug : wl_country_code =US,get code =
ken , struParam.Channel =0
sec_chan = 0
ken , struParam.secondaryChannel =0
ken param.channel=0,secondarychannel=0,autoselmode=1
ken , struParam.channelBondingMode =1
ken ... chbonding....
ken ... wl_qos....
struParam.qosMode =1
ken ... QoS Mode....
ken ... wl_wme....
ken ... CCK Rate....
ken ... OFDM....
ken ... wl_frameburst....
ken debug wl_proximity
ken .. wl_compression =0
ken ................. wl_macmode
ken debug : pc01Value wl_wep = off
halPhyGetChanelListWithPower: dev_ind->numChan = 11
Applied commit-all global settings
find_pid_by_name(): PID(45) match
find_pid_by_name(): 1
airgo_init(): ani8021x_aa processes existed
ssid=linksys
Starting MAC FW module...radioID = 0 NUM_RADIO 1
- param_addr = 0x8148d2f4 start at C003B3B0
[0][1a][2][1179] successfully initialized hal rc 0
[0][20][2][1] halPerformSystemReset Called
[0][10][2][1] After halMacHwInit done
[0][11][3][1] Sending CFG_DNLD_REQ
Register External Device (wlan0) vid (9) extPortNum (6)
Reserve port 6 for peripheral device use. (0x40)
Total WLAN/WDS links: 1
aniSdkSetSsid sintStatus =0
aniSdkSetSuppressSsid sintStatus =0
aniSdkSetBeaconParam sintStatus =0
WSM radio 0 reset started.
[0][12][2][1] received unexpected SME_STOP_BSS_REQ in state 2, for role 0
[0][12][2][1] eLIM_SME_SUSPEND_STATE
aniSdkSetDot11MacParam sintStatus =0
mac_mod_exit: Cleaning MAC FW module: radio Id 0
aniSdkSetNwkDensity sintStatus =0
aniSdkSetRadioPersonaStarting MAC FW module...radioID = 0 NUM_RADIO 1
- param_addr = 0x8148d2f4 start at C003B3B0
[0][1a][2][1220] successfully initialized hal rc 0
[0][20][2][1] halPerformSystemReset Called
[0][10][2][1] After halMacHwInit done
[0][11][3][1] Sending CFG_DNLD_REQ
aniSdkSetWorldMode
[0][11][3][1] CFG size 4596 bytes MAGIC dword is 0xdeaddead
[0][11][3][1] CFG hdr totParams 262 intParams 204 strBufSize 1080/1775
[0][14][2][1] Cfg param 231 indication not handled
[0][10][3][1] initFixedState : STA 0
[0][10][2][1] limresumeactivityntf is sent from hal
[0][10][2][1] halProcessStartEvent: Completed HAL/CFG/HAL init; State 3!
[0][10][2][1] halProcessStartEvent: Done:- Hal State 3
[0][12][2][1] Received RESUME_NTF in State 2 on Role 0
halPhyGetChanelListWithPower: dev_ind->numChan = 11
ken debug : wl_country_code =US,g[0][14][2][13] Cfg param 190 indication not handled
[0][14][2][13] Cfg param 191 indication not handled
[0][14][2][13] Cfg param 49 indication not handled
[0][11][2][13] Value 20 out of range [100,1000] cfg id 187
et code =US
ken , struParam.Channel =0
sec_chan = 0
ken , struParam.secondaryChannel =0
ken param.channel=0,secondarychannel=0,autoselmode=1
ken , struParam.channelBondingMode =1
ken ... chbonding....
ken ... wl_qos....
struParam.qosMode =1
ken ... QoS Mode....
ken ... wl_wme....
ken ... CCK Rate....
ken ... OFDM....
ken ... wl_frameburst....
ken debug wl_proximity
ken .. wl_compression =0
ken ................. wl_macmode
ken debug : pc01Value wl_wep = off
WSM radio 0 reset started.
Applied commit-all global settings
[0][12][2][176] received unexpected SME_STOP_BSS_REQ in state 0, for role 0
[0][12][2][176] eLIM_SME_OFFLINE_STATE
Delete port 0 from peripheral port set. (0x40)
Unregister Extension device with LinkID 1 -- (wlan0)
Total WLAN/WDS links: 0
halPhyGetChanelListWithPower: dev_ind->numChan = 11
mac_mod_exit: Cleaning MAC FW module: radio Id 0
Starting MAC FW module...radioID = 0 NUM_RADIO 1 - param_addr = 0x8148d2f4 start at C003B3B0
[0][1a][2][1415] successfully initialized hal rc 0
[0][20][2][1] halPerformSystemReset Called
[0][10][2][1] After halMacHwInit done
[0][11][3][1] Sending CFG_DNLD_REQ
Register External Device (wlan0) vid (9) extPortNum (6)
Reserve port 6 for peripheral device use. (0x40)
Total WLAN/WDS links: 1
[0][11][3][1] CFG size 4596 bytes MAGIC dword is 0xdeaddead
[0][11][3][1] CFG hdr totParams 262 intParams 204 strBufSize 1080/1775
[0][14][2][1] Cfg param 231 indication not handled
[0][10][3][1] initFixedState : STA 0
[0][10][2][1] limresumeactivityntf is sent from hal
[0][10][2][1] halProcessStartEvent: Completed HAL/CFG/HAL init; State 3!
[0][10][2][1] halProcessStartEvent: Done:- Hal State 3
[0][12][2][1] Received RESUME_NTF in State 2 on Role 0
halPhyGetChanelListWithPower: dev_ind->numChan = 11
[0][14][2][10] Cfg param 190 indication not handled
[0][14][2][10] Cfg param 191 indication not handled
[0][14][2][10] Cfg param 49 indication not handled
killall: udhcpd: no process killed
info, server (v0.9.9-pre) started
error, unable to parse 'opt domain '
error, max_leases value (254) not sane, setting to 50 instead
error, Unable to open /var/udhcpd.leases for reading
[0][12][3][179] Going to parse numSSID in the START_BSS_REQ, len=9
[0][10][3][179] initFixedState : STA 1
[0][19][3][179] dphSetBroadcastRateForFixedSta(): Set STA[0] broadcast rate to 2 (macRate 100)
[0][10][3][179] halUpdateConfig: set Proximity = 0
WSM radio 0 reset completed.
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: Bad rule (does a matching rule exist in that chain?)
|