Linksys WPC600N

From TechInfoDepot
(Redirected from Linksys WPC600N v1.1)
Jump to navigationJump to search
abgn (AN600)
Dual-Band Wireless-N Notebook Adapter
Linksys WPC600N 1.1 001.jpg
Support
InfoDepot Wiki
WikiDevi.wi-cat.ru
Platform
BrandModelRev
Linksys WPC600N v1.1
Interface
PCMCIA (32-bit)
Connector
PCMCIA (32-bit)
ID:14e4:4328 (15 addl. devices) SS: 1737:0066
Windows: PCI\VEN_14E4&DEV_4328&SUBSYS_00661737
FCCID
ICID
Chip1
Broadcom BCM4321
Chip2
Broadcom BCM2055
MIMO status
2x2:2
Wireless Standards
IEEE 802.11a/b/g/n
802.11n
up to 300/300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
802.11a
up to 54 Mbps
Operating Frequency
2.4 or 5 GHz
Other
Manuf/OEM/ODM
Flags:
DFS

Additional chips
2.4/5GHz Front End Module;Skyworks;unknown;;1;

Retail
FCC approval date 31 July 2007
UPC 745883573172
(UPC DB, On eBay)
ASIN B000WMK8TE Flag of the United States.svg

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Linksys device with specifications, see Linksys.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

WPC600N serial numbers appear to start with ANV0 or MNV0.

Wi-Fi Certified : WFA5421 (as of 03/31/2008)

lspci -nnv dump

Network controller: Broadcom BCM4321 802.11a/b/g/n [14e4:4328] (rev 01)
Subsystem: Linksys WPC600N v1 802.11a/b/g/n Wireless-N Adapter [1737:0066]
        Flags: bus master, fast devsel, latency 64, IRQ 19
        Memory at f1d00000 (32-bit, non-prefetchable) [size=16K]
        Kernel driver in use: b43-pci-bridge

ssb + b43 dump

ssb: Found chip with id 0x4321, rev 0x01 and package 0x01
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x12, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0B, vendor 0x4243)
ssb: Core 2 found: PCI-E (cc 0x820, rev 0x02, vendor 0x4243)
ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243)
ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
b43-phy5: Broadcom 4321 WLAN found (core revision 11)
b43-phy5: Found PHY: Analog 5, Type 4 (N), Revision 1
          Broadcom 43xx driver loaded [ Features: PNL ]
ieee80211 phy5: Selected rate control algorithm 'minstrel_ht'
b43-phy5: Loading firmware version 666.2 (2011-02-23 01:15:07)
b43-phy5 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000
b43-phy5 ERROR: This device does not support DMA on your system.
         It will now be switched to PIO.
b43-phy5: Controller RESET (DMA error) ...
b43-phy5: Loading firmware version 666.2 (2011-02-23 01:15:07)
b43-phy5 warning: Forced PIO by use_pio module parameter.
         This should not be needed and will result in lower performance.
b43-phy5: Controller restarted
IPv6: ADDRCONF(NETDEV_UP): wlan147: link is not ready

Pictures

FCCID Q87-WPC600NV11