LevelOne WBR-2400TX
b (B11) | |
---|---|
22Mbps Wireless AP Router w/ 4-Port Switch | |
Wikipedia | |
Platform | |
Brand • Model • Rev |
LevelOne WBR-2400TX |
FCC ID | |
Type |
wireless router |
CPU1 |
Texas Instruments TNETW5305 |
CPU1 Type |
ARM7 |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
? MiB |
RAM1 Size |
? MiB |
RAM1 Chip |
Brand? Model? x 2 |
ETH chip1 |
Texas Instruments TNETW5305 |
Switch |
ADMtek Model? |
Ethernet Port Count |
1-WAN 4-100MbE-LAN |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
Power |
12 VDC, 0.8 A |
Connector type |
barrel |
Other | |
Default IP address: 192.168.0.1 | |
Manuf/OEM/ODM | |
Retail | |
FCC approval date | 10 June 2003 |
Country of manuf | Taiwan |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
Wireless Standard |
IEEE 802.11b |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
For a list of all currently documented LevelOne device with specifications, see LevelOne.
- • 11 Mbps - 2.4GHz 802.11b = B11 class
Overview
"MADE IN TAIWAN" and "4900K301B" is silkscreened on the LED board in the FCC photos.
The FCC test report specifies the CPU as the TNETW5305 (ARM7) and the Flash and RAM size as 1MB and 4MB respectively (with Can Expand noted after the values). It also specifies the Switch chip as a Atan 8995L / AT8985P or Marvell 88E6052.. but the FCC image shows the device with an ADMtek Switch.
This device uses the same board as the SerComm IP706ST (minus some minor changes like modularization of the LEDs).
The default SSID may be default.