Kimax U25AWF
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
---|---|
mobile NAS | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Kimax U25AWF |
FCC ID |
none specified |
Type |
mobile NAS |
CPU1 | |
CPU1 Type |
MIPS 24KEc |
CPU1 Speed |
580 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Macronix MX25L12805D |
ETH chip1 | |
Ethernet Port Count |
1-100MbE-LAN |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot 1.1.3 |
Stock FW OS |
Linux 3.14.18 |
Expansion IF types |
USB 2.0, USB 3.0 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
5 VDC, ? A |
Connector type |
USB Female Micro-B |
Flags: battery, portable | |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
ASIN |
B01CTNN07K ![]() |
Country of manuf | China |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
Kimax U25AWF
There is three brend name of this device Kimax/Mixxar/Blueendless
- There is not official site of it.
Kimax U25AWF is a HDD Enclosure with Wi-Fi/Eth conection and battery.
- It has 1x USB 2.0 and 1x USB 3.0 OTG/Charge.
Modes
It has three modes
- 1. HDD Enclosure with USB 2.0 HUB
- 2. NAS
- 2a. Power supply from battery
- 2b. Power supply from USB 3.0 port
- 3. Power bank
Links of Interest
Vendor links
- Kimax U25AWF on AliExpress (currently selling for ~$45)
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
OpenWRT
OEM Firmware
It is OpenWRT with changed WebUI (system version 1.1.6).
- There is not Telnet/SHH.
There is patch supporting all option of this device.
- Checked for Chaos Calmer. All work
Upgrading
Upgrading Firmware
It can be done with OEM WebUI.
Upgrading Bootloader
You can upgrade bootloader from u-boot menu or using programmer.
JTAG-Serial Info
Serial
Board don`t have pins for serial connection. But you can solder three wires
- (2 micro pad tx, rx and gnd get at any place where you want).
Serial port settings is 57600 8n1 for u-boot and 9600 8n1
- (was found out by "logic analyzer") for firmware
- (settings are changed from start of uploading firmware)