iconnect AP880G

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
wireless router
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
iconnect AP880G
FCC ID
Type
wireless router
CPU1
Atheros AR2312A
CPU1 Type
MIPS 4Kc
CPU1 Speed
180 MHz
Flash1 Chip
Fujitsu Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
AMIC Model?
ETH chip1
Atheros AR2312A
Switch
Marvell 88E6060
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
9 VDC, 1 A
Connector type
barrel
Flags:
block diagram

Additional chips
2.4GHz Power Amplifier IC;Microsemi;LX5510;;1;

Other

Default SSID: 11g (2 addl. devices)
Default IP address: 10.0.0.1
the IP 10.0.0.1 is used by 20 additional devices
of which 0 are iconnect devices

Manuf/OEM/ODM
Retail
FCC approval date 22 November 2003
Radio 1
Chip1
Atheros AR2312A
Chip2
Atheros AR2112A
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The AP880G and AP880G-Pro would appear to be covered by this FCC ID.

"PCB-1016-00" appears to be silkscreened on the board in the FCC photos.

The Aztech NA8300 appears to share the same board as this device. The parent RFNet model may be APRT-2001g.

Default settings are per the FCC manual.

The power supply shown in the external photos is an unbranded SY-0901 (120VAC ~ 60Hz, 150mA -> 9VDC, 1.0A).