Handlink WAP-001 rev. 2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
In Wall Box Access Point
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Handlink WAP-001 2
FCC ID
Type
access point, in-wall access point
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
580 MHz
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
ESMT M14D5121632A-2.5B
ETH chip1
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
PoE
802.3af, standard
Power
48 VDC, 0.15 A
Connector type
Ethernet (PoE)
Serial Port (UART)
yes, internal, 4-pin header, 3.3V TTL
Other

Default SSID: Wireless (24 addl. devices)
Default IP address: 10.59.1.254
the IP 10.59.1.254 is used by 1 additional devices
of which 1 are Handlink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 2 are Handlink devices

Retail
FCC approval date 10 March 2014
Country of manuf Taiwan
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Handlink WAP-001 rev. 1RalinkRalink
Handlink WAP-001 rev. 2MediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"P/N: 4600001-001"<...>, "WALL AP RF BOARD", "REV : 0A0" is silkscreened on the wireless board in the FCC photos.

"P/N: 4600001-201__1__G", "WALL AP POWER BOARD", and "REV: 0B0" is silkscreened on the power / Ethernte board.

Default settings (including the SSID) are per the FCC manual. They may be inaccurate.