Edimax 3G-6200n

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
wireless router
InfoDepot Wiki
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Edimax 3G-6200n
FCC ID
Type
wireless router
CPU1
Ralink RT3050
CPU1 Type
MIPS 24KEc
CPU1 Speed
320 MHz 16-bit
Flash1 Chip
Macronix 29LV320DBTI-70G
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Zentel A3V56S40ETP-G6
ETH chip1
Ralink RT3050
Switch
Ralink RT3050
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3/3u

802dot11 OUI: 00:1F:1F (4 E, 14 W)
Ethernet OUI: 00:1F:1F (4 E, 14 W)

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1 A
Connector type
barrel
Other

Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 58 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 184 additional devices
of which 73 are Edimax devices

Manuf/OEM/ODM
Retail
FCC approval date 23 February 2009
ASIN B00EWWE36O Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Ralink RT3050
Wireless interface OUI
00:1F:1F
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 FCC ID
Edimax BR-6226nNDD9562250817
NDD9562250907

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Edimax device with specifications, see Edimax.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

USB 2.0 for 3G/3.5G USB Modem or Printer

JTAG-Serial Info

Serial

Serial Pinouts

For the record serial seems to be also on JP2
Pins are 3.3V - RXD - GND - TXD
Configuration is: 57600 8 N 1

boot log • >>
***************************************************************************************************************************************************************************************************************************************************

Submarine 1.1.3 (Apr 16 2009 - 10:03:22)

Board: Ralink APSoC DRAM: 32 MB
relocate-code pointer at: 81fa8000
************************************
Init GPIO Pin************************************
flash-protect ON: from 0xBFC00000 to 0xBFC262B7
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash-protect ON: from 0xBFC30000 to 0xBFC3FF
protect on 10
*** Warning - bad CRC, using default environment


Ralink Submarine Version: 3.1
--------------------------------------------------------------
ASIC 3052-MP1 (MAC to GigaMAC Mode)
DRAM COMPONENT: 256Mbits
DRAM BUS: 16BIT
Total memory: 32 MBytes
Flash: 4 MBytes
Date:Apr 16 2009 Time:10:03:22

icache: sets:256, ways:4, linesz:32,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

The CPU freq - 320 MHz

SDRAM bus set to 16 bit
SDRAM size Ã32 Mbytes

Please choose the operation:
0: Load ucos code to SDRAM via TFTP Client.
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.

Net:
eth register
Eth0 (10/100-M)
enetvar'ethaddr,Eth addr:00:AA:BB:CC:DD:18
00:AA:BB:CC:DD:18:

et-current->name >Em0 (10/100-M)

DEBUG BootType 48

0: System Load Boot Loader | F/W then write to Flash via TFTP Client.
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
Please Input new ones /or Ctrl-C to discard
Input device IP (10.10.10.123) Input server IP (10.10.10.3) Input Li
nux Kernel filename (NULL>)

netboot-common, argcÃ3 3
***********buf 0x81fce420
********NexTxPacket à 81fe64c0

NetTxPacket 0x81FE64C0

NetRxPackets[0] - 0x81FE6AC0

NetRxPackets[1] - 0x81FE70C0

NetRxPackets[2] 0x81FE76C0

NetRxPackets[3] 0x81FE7CC0

NetRxPackets[4] 0x81FE82C0

NetRxPackets[5] 0x81FE88C0

NetRxPackets[6] 0x81FE8EC0

NetRxPackets[7] 0x81FE94C0

NetRxPackets[8] 0x81FE9AC0

NetRxPackets[9] 0x81FEA0C0

NetRxPackets[10] - 0x81FEA6C0

NetRxPackets[11] 0x81FEACC0

NetRxPackets[12] 0x81FEB2C0

NetRxPackets[13] 0x81FEB8C0

NetRxPackets[14] 0x81FEBEC0

NetRxPackets[15] 0x81FEC4C0

NetRxPackets[16] - 0x81FECAC0

NetRxPackets[17] 0x81FED0C0

NetRxPackets[18] 0x81FED6C0

NetRxPackets[19] 0x81FEDCC0

KSEG1ADDR(NetTxPacket) 0xA1FE64C0

NetLoop,call eth-halt !

NetLoop,call ethinit !
Trying Eth0 (10/100-M)

Waitting RT2880-RX-DMA-BUSY status Start... done

Mac to giga Mac mode

Ã...r. Ã A1FCE840, tx ring0 Ã A1FCE700

Header Payload scatter function is Disable !!

RT2880-PDMA-GLO-CFG-00000020

*******************************************************************

RT2880-RX-CALC-IDX0-19

RT2880-RX-DRX-IDX0 - 0

*******************************************************************

ETH STATE ACTIVE!!
Select server or client model: 1/2
server model start
SERVER IP address : 192.168.1.6 port:69
Load address: 0x80100000
Loading: *

***************************************************************************************************************************************************************************************************************************************************

Submarine 1.1.3 (Apr 16 2009 - 10:03:22)

Board: Ralink APSoC DRAM: 32 MB
relocate-code pointer at: 81fa8000
************************************
Init GPIO Pin************************************
flash-protect ON: from 0xBFC00000 to 0xBFC262B7
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash-protect ON: from 0xBFC30000 to 0xBFC3FF
protect on 10
*** Warning - bad CRC, using default environment


Ralink Submarine Version: 3.1
--------------------------------------------------------------
ASIC 3052-MP1 (MAC to GigaMAC Mode)
DRAM COMPONENT: 256Mbits
DRAM BUS: 16BIT
Total memory: 32 MBytes
Flash: 4 MBytes
Date:Apr 16 2009 Time:10:03:22

icache: sets:256, ways:4, linesz:32,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

The CPU freq - 320 MHz

SDRAM bus set to 16 bit
SDRAM size Ã32 Mbytes

Please choose the operation:
0: Load ucos code to SDRAM via TFTP Client.
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.

You choosed 3

0 0

3: System boot system code via Flash.
Booting image at bfc50000 ...
Bad Magic Number,43535953
Image name: Linux Kernel Image
Created: 2009-11-03 9:38:24 UTC

System Control status 0x20400000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3653548 bytes à 3.5 MB
Load Address: 80000000
Entry Point: 802bc000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
Transferring control to Linux (at address 802bc000) ...
Giving linux memsize in MB, 32

Starting kernel ...


LINUX started...

THIS IS ASIC
Linux version 2.6.21 (root-vance.localdomain) (gcc version 3.4.2)
17:30:33 CST 2009

The CPU feqenuce set to 320 MHz
CPU revision is: 0001964c
Determined physical RAM map:
memory: 02000000 Ã 00000000 (usable)
Built 1 zonelists. Total pages: 8128
Kernel command line: console-ttyS1.57600n8 root/env/mtdblock4
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause à 80800034, status à 1100ff00
PID hash table entries: 128 (order: 7, 512 bytes)
calculating r4... 00138800(1280000)
CPU frequency 320.00 MHz
Using 160.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29468k/32768k available (2266k kernel code, 3300k reserved, 529k data, 1
16k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
FLASH-API: MAN-ID-C2 DEV-ID-22A8 SIZE-4MB
***********Init LED Driver*************
Init GPIO Pin
Init GPIO Direction
Init GPIO Interrupt
***********Init LED Driver Finishing*********
RalinkÃ3gpio-init-irq
LED & GPIO & LAN Status Driver LED VERSION
HDLC line discipline: version Ã...Revision: 1.1.1.1, maxframe 4096
N-HDLC line discipline registered.
Serial: 8250/16550 driver - Revision: 1.3 - 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq à 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq à 12) is a 16550A
loop: loaded (max 8 devices)
rdmÃ3major à 254
GDMA1-MAC-ADRH -- 0x00000000
GDMA1-MAC-ADRL -- 0x00000000
Ralink APSoC Ethernet Driver Initilization. v1.60 256 rx/tx descriptors allocat
ed, mtu à 1500!
GDMA1-MAC-ADRH -- 0x0000000c
GDMA1-MAC-ADRL -- : 0x43305277
PROC INIT OK!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
ralink flash device: 0x1000000 at 0xbf000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi-cmdset-0002: Disabling erase-suspend-program due to code brokenness.
Creating 7 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "Boot Loader"
mtd: Giving out device 0 to Bootloader
0x00030000-0x00040000 : "Config "
mtd: Giving out device 1 to Config
0x00040000-0x00050000 : "Factory"
mtd: Giving out device 2 to Factory
0x00050000-0x00160000 : "Kernel"
mtd: Giving out device 3 to Kernel
0x00160000-0x003e0000 : "RootFS"
mtd: Giving out device 4 to RootFS
0x003e0000-0x00400000 : "Cimage"
mtd: Giving out device 5 to Cimage
0x00050000-0x003e0000 : "Uimage"
mtd: Giving out device 6 to Uimage
block2mtd: version >Revision: 1.1.1.1
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
dwc-otg: version 2.60a 22-NOV-2006
DWC-otg: Using DMA mode
dwc-otg lm0: DWC OTG Controller
dwc-otg lm0: new USB bus registered, assigned bus number 1
dwc'otg lm0: irq 18, io mem 0x00000000
DWCÃotg: Init: Port Power? opÃ3stateÃ1
DWC-otg: Init: Power Port (0)
usb usb1: Product: DWC OTG Controller
usb usb1: Â Manufacturer: Linux 2.6.21 dwcÃotgÃ3hcd
usb usb1: SerialNumber: lm0
usb usb1: configuration Ã1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
u32 classifier
Performance counters on
nfÃ3conntrack version 0.5.0 (256 buckets, 2048 max)
ip tables: (C) 2000-2006 Netfilter Core Team, Type-Restricted Cone
ClusterIP Version 0.8 loaded successfully
arp tables: (C) 2002 David S. Miller
ipt 'time loading
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear Ã...greearbÃ3candelatech.com>
All bugs added by David S. Miller Ã...davemÃ3redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
init started: BusyBox v1.11.1 (2009-11-03 17:37:25 CST)
starting pid 606, tty '': '/etc/rc.sh'
Cannot run '/etc/rc.sh': No search file or directory

starting pid 607, tty '': '-/bin/sh'console.
Algorithmics/MIPS FPU Emulator v1.5


BusyBox v1.11.1 (2009-11-03 17:37:25 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Sat Jan 1 00:00:00 UTC 2000
killall: pptp.sh: no process killed
killall: pppoe.sh: no process killed
killall: failover.sh: no process killed
ifconfig: 0.0.0.0: error fetching interface information: Device not found

0x01d25000, tx ring 0xa1d25000, size: 16 bytes

phy'rx'ring à 0x01d26000, rx ring à 0xa1d26000, size: 16 bytes
RT305x-ESW: Link Status Changed
GDMA1 FWD CFG - 710000
ra2880stop()...Done
Free TX/RX ring memory!
GDMA1-MAC-ADRH -- : 0x0000001f
GDMA1-MAC-ADRL -- : 0x1f6d80fc

0x01cdb000, tx ring 0xa1cdb000, size: 16 bytes

phy'rx'ring à 0x01cdc000, rx ring à 0xa1cdc000, size: 16 bytes
GDMA1 FWD CFG - 710000
eth2.1: Setting MAC address to 00 1f 1f 6d 80 fc.
VLAN (eth2.1): Underlying device (eth2) has same MAC, not checking promiscious
mode.
eth2.2: Setting MAC address to 00 0f ea c4 35 3c.
device eth2 entered promiscuous mode
WiFi (eth2.2): Setting underlying device (eth2) to promiscious mode.
Initialize WLAN interface

Setup BRIDGE interface

ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
device eth2.1 entered promiscuous mode
eth2.1: dev'set promiscuity(master,1)
route: ioctl 0x890c failed: No search process
br0: port 1(eth2.1) entering learning state
br0: topology change detected, propagating
br0: port 1(eth2.1) entering forwarding state
route: ioctl 0x890c failed: No search process
route: ioctl 0x890c failed: No search process

------> 802.1x------>Enter
------> 802.1x------>Exit

Static DHCP Leases disable!
route: ioctl 0x890c failed: No search process
device eth2 is not a slave of br0
device eth2.1 is already a member of a bridge; can't enslave it to bridge br0.
switch reg write offset-14, value 405555
switch reg write offset, value-2001
switch reg write offset-98, value-7f3f
switch reg write offset-40, value-1001
switch reg write offset 44, value-1001
switch reg write offset-48, value-1002
switch reg write offset 70, value-ffff506f
Set: phy[0].reg[0] Ã b100
Set: phy[1].reg[0]
Set: phy[2].reg[0]
Set: phy[3].reg[0] Ã b100
Set: phy[4].reg[0] Ã b100

**************************************************************************************************************************
* Running Diagd *
**************************************************************************************************************************
**************************************************************************************************************************
* Enable WSC-UPnP *
**************************************************************************************************************************
/bin/init.sh: line 522: wscd: not found
**************************************************************************************************************************
* Enable LLTD *
**************************************************************************************************************************


killall: snmpd: no process killed
killall: lld2d: no process killed
**************************************************************************************************************************
* Enable GPIO Interrupt *
**************************************************************************************************************************
ralink-gpio:ioctl GPIO REG
ralink-gpio:ioctl GPIO REG

killall: watchdog.sh: no process killed
ip table: set wan-name-eth2.2

killall: radiusd: no process killed
RADIUS server disable !!
kill: you need to specify whom to kill
**************************************************************************************************************************
* FREE Page,Dentries and Inodes Cache *
**************************************************************************************************************************
MemFree: 23608 kB
Cached: 1340 kB
killall: pppd: no process killed
killall: pptp.sh: no process killed
killall: pppoe.sh: no process killed
ifconfig: 0.0.0.0: error fetching interface information: Device not found
Setup WAN interface
ifconfig: 0.0.0.0: error fetching interface information: Device not found
device eth2 is not a slave of br0
device eth2.1 is already a member of a bridge; can't enslave it to bridge br0.
switch reg write offset-14, value 405555
switch reg write offset, value-2001
switch reg write offset-98, value-7f3f
switch reg write offset-40, value-1001
switch reg write offset 44, value-1001
switch reg write offset-48, value-1002
switch reg write offset 70, value-ffff506f
Set: phy[0].reg[0] Ã b100
Set: phy[1].reg[0]
Set: phy[2].reg[0]
Set: phy[3].reg[0] Ã b100
Set: phy[4].reg[0] Ã b100

udhcpc (v1.11.1) started
rm: cannot remove '/tmp/agentenabledflag': No such file or directory
/bin/start-wan.sh: line 265: /bin/agent: nip table: set wan-name-eth2.2
ot found
killall: modemctl: no process killed


ralink-gpio:ioctl GPIO REG
ralink-gpio:ioctl GPIO REG
into eth2.2.deconfig

killall: snmpd: no process killed