Dell TrueMobile 2300 v1 (WX-5565D)
bg (G54) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless Broadband Router | |||||||||||||
![]() | |||||||||||||
Wikipedia | |||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | |||||||||||||
OpenWrt |
Status Unknown | ||||||||||||
Tomato any flavor |
Status Unknown | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Dell TrueMobile 2300 v1 A00 | ||||||||||||
Model Part Number |
WX-5565D | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Type |
wireless router | ||||||||||||
CPU1 |
Broadcom BCM4702 | ||||||||||||
CPU1 Type |
MIPS 32 | ||||||||||||
CPU1 Speed |
125 MHz | ||||||||||||
Flash1 Chip |
AMD Am29LV320DB-90EI | ||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||
RAM1 Chip |
AMIC A43L2616V-6 x 2 | ||||||||||||
ETH chip1 |
Broadcom BCM4702 | ||||||||||||
ETH chip2 |
Altima AC101L | ||||||||||||
Switch |
Broadcom BCM5325MA2 | ||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||
Stock FW OS |
Linux | ||||||||||||
Expansion IF types |
Mini PCI | ||||||||||||
Mini PCI slots |
1 | ||||||||||||
Power |
5 VDC, 2 A | ||||||||||||
Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) | ||||||||||||
Serial Port (UART) |
possible, no UART, unpopulated | ||||||||||||
Other | |||||||||||||
Default SSID: wireless (9 addl. devices) | |||||||||||||
Manuf/OEM/ODM |
Gemtek WX-5565D | ||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
FCC approval date | 09 May 2003 | ||||||||||||
ASIN |
B001V7596Q ![]() | ||||||||||||
Country of manuf | Taiwan | ||||||||||||
Radio 1 | |||||||||||||
Radio1 module | |||||||||||||
Radio1 module IF |
Mini PCI | ||||||||||||
Chip1 |
Broadcom BCM4306 | ||||||||||||
Chip2 |
Broadcom BCM2050 | ||||||||||||
Wireless interface OUI |
00:90:4B | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
Wireless Standard |
IEEE 802.11b/g | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Dell device with specifications, see Dell.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
- OEM: Gemtek WX-5565D (WX5565_V02)
The device is on the DD-WRT supported device table.
- Switch is part no. BCM5325MA2KQM.
The Mini PCI card is soldered onto the retaining clips..
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
OpenWrt
Recovery
This information is per tasiak on the OpenWrt forums.
The 2300 v1 is recoverable from (at least some) bricked states via pin shorting..
- specifically, pins 9 and 10 on the Flash IC.
Pin 1 is denoted by the silkscreened dot. Pin 10 should be about where a small
- silkscreened line on the PCB which intersects with R69 in the board photos below.
Recovery steps...
- 0: Figure out how you are going to proceed with the following steps.
- 1: Power the router off.
- 2: Power the router on. Wait for LED init..
- 3: Short pins 9 and 10 for a short period of time (~ 1 second).
- 4: Press the reset button. (I did not find this step necessary.)
- 5: The router should now be pingable at whatever the bootloader is set to.. probably 192.168.2.1.
- 6: TFTP (binary / octet mode) the firmware of choice
- (I used the latest version of Tomato, the stock FW did not work) to the unit and wait.
Tomato
w/ Tomato 1.28
dmesg |
---|
CPU revision is: 00024000 Loading BCM4710 MMU routines. Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@tobu) (gcc version 3.2.3 with Broadcom modifications) #1 Sun Jun 27 20:13:35 PDT 2010 Setting the PFC value as 0x15 Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4710 rev 0 at 125 MHz !unable to setup serial console! Calibrating delay loop... 82.94 BogoMIPS Memory: 14464k/16384k available (1336k kernel code, 1920k reserved, 108k data, 64k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.0 (2006/03/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096 N_HDLC line discipline registered. PPP generic driver version 2.4.2 Amd/Fujitsu Extended Query Table v1.1 at 0x0040 number of CFI chips: 1 Flash device: 0x400000 at 0x1fc00000 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x003f0000 : "linux" 0x000e2a10-0x002f0000 : "rootfs" 0x002f0000-0x003f0000 : "jffs2" 0x003f0000-0x00400000 : "nvram" sflash: chipcommon not found NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (8092 buckets, 4096 max) - 368 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Warning: unable to open an initial console. Algorithmics/MIPS FPU Emulator v1.5 nvram_commit(): init nvram_commit(): end ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.38.0 eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.38.0 PCI: Enabling device 01:01.0 (0004 -> 0006) eth2: Broadcom BCM4320 802.11 Wireless Controller 3.90.38.0 tomato_ct.c [Jun 27 2010 20:15:22] device eth0 entered promiscuous mode device eth2 entered promiscuous mode br0: port 2(eth2) entering learning state br0: port 1(eth0) entering learning state br0: port 2(eth2) entering forwarding state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating |
cat /proc/cpuinfo |
---|
# cat /proc/cpuinfo system type : Broadcom BCM947XX processor : 0 cpu model : BCM4710 V0.0 BogoMIPS : 82.94 wait instruction : no microsecond timers : yes tlb_entries : 32 extra interrupt vector : no hardware watchpoint : no VCED exceptions : not available VCEI exceptions : not available unaligned_instructions : 1 dcache hits : 3598479012 dcache misses : 18079573 icache hits : 1940176145 icache misses : 110146386 instructions : 2051150825 |
nvram show |
---|
# nvram show action_service= autofw_port0= block_wan=1 boardnum=44 boardtype=bcm94710ap boot_wait=on brau_state= btn_override= btn_reset= cifs1= cifs2= clkfreq=125 console_loglevel=1 ct_max= ct_tcp_timeout= ct_udp_timeout= ddnsx0= ddnsx0_cache= ddnsx1= ddnsx1_cache= ddnsx_refresh=28 ddnsx_save=1 debug_clkfix=1 debug_cprintf=0 debug_cprintf_file=0 debug_ddns=0 debug_nocommit=0 dhcp_domain=wan dhcp_lease=0 dhcp_num=50 dhcp_start=100 dhcpc_minpkt=0 dhcpd_dmdns=1 dhcpd_endip= dhcpd_gwmode= dhcpd_lmax= dhcpd_slt=0 dhcpd_startip= dhcpd_static= dl_ram_addr=a0001000 dmz_enable=0 dmz_ipaddr=0 dmz_sip= dns_addget=0 dns_intcpt=0 dnsmasq_custom= dr_lan_rx=0 dr_lan_tx=0 dr_setting=0 dr_wan_rx=0 dr_wan_tx=0 env_path= et0macaddr=00:90:4c:49:00:2c et0mdcport=0 et0phyaddr=30 et1macaddr=00:90:4c:4a:00:2c et1mdcport=1 et1phyaddr=1 filter=on filter_client0= filter_maclist= filter_macmode=deny http_enable=1 http_id=TIDe4bbaa8b6caea394 http_lanport=80 http_passwd=admin http_username= http_wanport=8080 https_crt= https_crt_cn= https_crt_file= https_crt_save=0 https_enable=0 https_lanport=443 jffs2_exec= jffs2_format=0 jffs2_on=0 l2tp_get_ip= l2tp_server_ip= lan_dhcp=0 lan_domain= lan_gateway=0.0.0.0 lan_hwaddr=00:90:4C:49:00:2C lan_hwnames= lan_ifname=br0 lan_ifnames=eth0 eth2 eth3 eth4 lan_ipaddr=192.168.1.1 lan_lease=86400 lan_netmask=255.255.255.0 lan_proto=dhcp lan_route= lan_stp=0 lan_wins= led_override= log_events= log_file=1 log_in=0 log_limit=60 log_mark=60 log_out=0 log_remote=0 log_remoteip= log_remoteport=514 mac_wan= mac_wl= macnames= manual_boot_nv=0 mtu_enable=0 multicast_pass=0 ne_shlimit=0,3,60 ne_syncookies=0 ne_valpha=2 ne_vbeta=6 ne_vegas=0 ne_vgamma=2 nf_ftp=1 nf_h323=1 nf_l7in=1 nf_loopback=1 nf_pptp=1 nf_rtsp=1 nf_ttl=0 ntp_kiss= ntp_kiss_ignore= ntp_server=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org ntp_tdod=0 ntp_updates=4 os_date=Sun, 27 Jun 2010 20:10:52 -0700 os_flash_addr=bfc40000 os_name=linux os_ram_addr=80001000 os_version=1.28.1816 pmon_ver=PMON 3.11.48.7 portforward=0<3<1.1.1.0/24<1000:2000<<192.168.1.2<ex: 1000 to 2000, restricted>0<2<<1000,2000<<192.168.1.2<ex: 1000 and 2000>0<1<<1000<2000<192.168.1.2<ex: different internal port>0<3<<1000:2000,3000<<192.168.1.2<ex: 1000 to 2000, and 3000> ppp_ac= ppp_demand=0 ppp_get_ac= ppp_get_srv= ppp_idletime=5 ppp_keepalive=0 ppp_mru=1500 ppp_mtu=1500 ppp_passwd= ppp_redialperiod=30 ppp_service= ppp_static=0 ppp_static_ip= ppp_username= pppoe_ac= pppoe_demand=0 pppoe_idletime=5 pppoe_ifname= pppoe_keepalive=0 pppoe_lef= pppoe_lei= pppoe_passwd= pppoe_pid0= pppoe_service= pppoe_static=0 pppoe_static_ip= pppoe_username= pptp_get_ip= pptp_server_ip= qos_ack=1 qos_burst0= qos_burst1= qos_default=3 qos_enable=0 qos_fin=0 qos_ibw=1000 qos_icmp=0 qos_obw=230 qos_orates=80-100,10-100,5-100,3-100,2-95,1-50,1-40,1-30,1-20,1-10 qos_orules=0<<6<d<80,443<0<<0:512<1<WWW>0<<6<d<80,443<0<<512:<3<WWW (512K+)>0<<-1<d<53<0<<0:2<0<DNS>0<<-1<d<53<0<<2:<4<DNS (2K+)>0<<-1<d<1024:65535<0<<<4<Bulk Traffic qos_reset=0 qos_rst=0 qos_syn=0 remote_management=0 remote_mgt_https=0 restore_defaults=0 rmgt_sip= router_name=tomato routes_static= routes_static_saved= rrule0=0|1320|300|31|||word text ^begins-with.domain. .ends-with.net$ ^www.exact-domain.net$|0|example rruleN=0 rrules_radio=-1 rrulewp=80,8080 rstats_bak=0 rstats_colors= rstats_data= rstats_enable=1 rstats_exclude= rstats_offset=1 rstats_path= rstats_sshut=1 rstats_stime=48 sch_c1= sch_c1_cmd= sch_c2= sch_c2_cmd= sch_c3= sch_c3_cmd= sch_rboot= sch_rcon= scratch=a0180000 script_brau= script_fire= script_init= script_shut= script_wanup= sdram_config=0x0000 sdram_init=0x0419 sdram_ncdl=0x00000000 sdram_refresh=0x8040 security_mode2=disabled security_mode=disabled security_mode_last= sesx_b0=1 sesx_b1=4 sesx_b2=4 sesx_b3=4 sesx_led=0 sesx_script= sshd_authkeys= sshd_eas=0 sshd_hostkey= sshd_pass=1 sshd_port=22 sshd_remote=0 sshd_rport=2222 t_cafree=0 t_features=0x0 t_fix1= t_hidelr=0 t_model=0 t_model_name=Broadcom 10/bcm94710ap/44// t_noise=-99 telnetd_eas=1 telnetd_port=23 tftp_ipaddr=192.168.2.1 tm_dst=1 tm_sel=PST8PDT,M3.2.0/2,M11.1.0/2 tm_tz=PST8PDT,M3.2.0/2,M11.1.0/2 trigforward=0<1<3000:4000<5000:6000<ex: open 5000-6000 if 3000-4000> upnp_enable=1 upnp_port=5000 upnp_secure=1 wait_time=5 wan_dns= wan_domain= wan_gateway=0.0.0.0 wan_gateway_buf=0.0.0.0 wan_get_dns= wan_get_domain= wan_hostname=unknown wan_hwaddr=00:90:4C:49:00:2D wan_hwname= wan_iface=eth1 wan_ifname=eth1 wan_ifnameX=eth1 wan_ifnames=eth1 wan_ipaddr=0.0.0.0 wan_islan=0 wan_lease=0 wan_mtu=1500 wan_netmask=0.0.0.0 wan_primary=1 wan_proto=dhcp wan_run_mtu=1500 wan_speed=4 wan_unit=0 wan_wins= watchdog=1000 wds_enable=0 wds_save= web_css=tomato web_mx=status,bwm web_pb= web_svg=1 web_wl_filter=0 wk_mode=gateway wl0_active_mac= wl0_afterburner=off wl0_akm= wl0_antdiv=-1 wl0_ap_isolate=0 wl0_auth=0 wl0_auth_mode=none wl0_bcn=100 wl0_bss_enabled=1 wl0_channel=6 wl0_closed=0 wl0_corerev=4 wl0_country=JP wl0_country_code=JP wl0_crypto=tkip wl0_distance= wl0_dtim=1 wl0_frag=2346 wl0_frameburst=off wl0_gmode=1 wl0_gmode_protection=off wl0_hwaddr=00:90:4B:36:30:06 wl0_ifname=eth2 wl0_infra=1 wl0_key1= wl0_key2= wl0_key3= wl0_key4= wl0_key=1 wl0_lazywds=1 wl0_leddc=0x640000 wl0_mac_deny= wl0_mac_list= wl0_maclist= wl0_macmode=disabled wl0_maxassoc=128 wl0_mode=ap wl0_mrate=0 wl0_net_mode=mixed wl0_net_reauth=36000 wl0_passphrase= wl0_phytype=g wl0_phytypes=g wl0_plcphdr=long wl0_radio=1 wl0_radioids=BCM2050 wl0_radius_ipaddr= wl0_radius_key= wl0_radius_port=1812 wl0_rate=0 wl0_rateset=default wl0_reg_mode=off wl0_rts=2347 wl0_ssid=wireless wl0_txant=3 wl0_txpwr=42 wl0_unit=0 wl0_wds= wl0_wds_timeout=1 wl0_wep=disabled wl0_wep_bit=128 wl0_wep_buf= wl0_wep_gen= wl0_wep_last= wl0_wme=off wl0_wme_ap_be=15 63 3 0 0 off wl0_wme_ap_bk=15 1023 7 0 0 off wl0_wme_ap_vi=7 15 1 6016 3008 off wl0_wme_ap_vo=3 7 1 3264 1504 off wl0_wme_no_ack=off wl0_wme_sta_be=15 1023 3 0 0 off wl0_wme_sta_bk=15 1023 7 0 0 off wl0_wme_sta_vi=7 15 2 6016 3008 off wl0_wme_sta_vo=3 7 2 3264 1504 off wl0_wpa_gtk_rekey=3600 wl0_wpa_psk= wl_active_mac= wl_afterburner=off wl_akm= wl_antdiv=-1 wl_ap_isolate=0 wl_auth=0 wl_auth_mode=none wl_bcn=100 wl_bss_enabled=1 wl_channel=6 wl_closed=0 wl_corerev= wl_country=JP wl_country_code=JP wl_crypto=tkip wl_distance= wl_dtim=1 wl_frag=2346 wl_frameburst=off wl_gmode=1 wl_gmode_protection=off wl_hwaddr= wl_ifname=eth2 wl_infra=1 wl_key1= wl_key2= wl_key3= wl_key4= wl_key=1 wl_lazywds=1 wl_leddc=0x640000 wl_mac_deny= wl_mac_list= wl_maclist= wl_macmode=disabled wl_maxassoc=128 wl_mode=ap wl_mrate=0 wl_net_mode=mixed wl_net_reauth=36000 wl_passphrase= wl_phytype=g wl_phytypes= wl_plcphdr=long wl_radio=1 wl_radioids= wl_radius_ipaddr= wl_radius_key= wl_radius_port=1812 wl_rate=0 wl_rateset=default wl_reg_mode=off wl_rts=2347 wl_ssid=wireless wl_txant=3 wl_txpwr=42 wl_unit=0 wl_wds= wl_wds_timeout=1 wl_wep=disabled wl_wep_bit=128 wl_wep_buf= wl_wep_gen= wl_wep_last= wl_wme=off wl_wme_ap_be=15 63 3 0 0 off wl_wme_ap_bk=15 1023 7 0 0 off wl_wme_ap_vi=7 15 1 6016 3008 off wl_wme_ap_vo=3 7 1 3264 1504 off wl_wme_no_ack=off wl_wme_sta_be=15 1023 3 0 0 off wl_wme_sta_bk=15 1023 7 0 0 off wl_wme_sta_vi=7 15 2 6016 3008 off wl_wme_sta_vo=3 7 2 3264 1504 off wl_wpa_gtk_rekey=3600 wl_wpa_psk= wlx_hpamp= --- 435 entries, 7277 bytes used, 25491 bytes free. |
cat /proc/mtd |
---|
# cat /proc/mtd dev: size erasesize name mtd0: 00040000 00010000 "pmon" mtd1: 003b0000 00010000 "linux" mtd2: 0020d5f0 00010000 "rootfs" mtd3: 00100000 00010000 "jffs2" mtd4: 00010000 00010000 "nvram" |
Pictures
Notes
Used PSU(s)
The included power adapter is a Delta ADP-10SB REV. B.
- ID/OD/length measurements used in this entry are likely not exact..
Delta Electronics ADP-10SB B (more) | |||||
---|---|---|---|---|---|
Input: 100-240 VAC ~ 50-60 Hz, 0.4 A | |||||
Input connector: unknown Style: large, vertical | |||||
Output: 5 VDC, 2 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |
- Dell
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4702
- Embedded System MIPS
- Embedded System 32
- Embedded System Altima
- Embedded System AC101L
- Embedded System BCM5325MA2
- Manuf Gemtek
- DD-WRT Supported
- Embedded System BCM4306
- Embedded System BCM2050
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Broadcom
- Altima
- Embedded System
- English Documentation