D-Link DNS-313
DNS-313 1-Bay Network Storage enclosure | |
Support | |
---|---|
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Incompatible |
Platform | |
Brand • Model • Rev |
D-Link DNS-313 |
Type |
NAS, NAS enclosure |
CPU1 |
Cortina Systems CS3512 |
CPU1 Speed |
300 MHz |
Flash1 Chip |
cFeon EN29LV400AB-70TCP |
Flash1 Size |
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Nanya NT5DS32M16BS-6K |
ETH chip1 |
Cortina Systems CS3512 |
ETH chip2 |
Realtek RTL8211B |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
| |
Stock bootloader |
RedBoot |
Stock FW OS |
Linux 2.6.3 |
Expansion IF types |
USB 2.0 (slave), SATA |
USB ports |
1 |
SATA Ports |
1 |
USB Hub Compatible |
no |
Power |
12 VDC, 3 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 4-pin header, unpopulated, 3.3V TTL, (19200,8,N,1), CON2 |
Flags: RTC w/ battery backup | |
Additional chips | |
Other | |
Default IP address: 192.168.0.32 | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
(Est.) release date | October 2007 |
For a list of all currently documented Cortina SoC's with specifications, see Cortina.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented D-Link device with specifications, see D-Link.
Overview
USB 2.0 Type B port is used exclusively for Direct Attached Storage function.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt Wiki
Support started version: 18.06.0
Current supported version: 22.03.5
Please insert instructions here