D-Link DIR-400 rev A1

From TechInfoDepot
(Redirected from D-Link DIR-400 A1)
Jump to navigationJump to search
bg (G108)
D-Link DIR-400 Wireless 108G
wireless router with internal and external antennas
DIR-400 Front.jpg
Wikipedia
InfoDepot Wiki
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
D-Link DIR-400 A1
FCC ID
IC ID
Type
wireless router
CPU1
CPU1 Type
MIPS 4KEc
CPU1 Speed
180 MHz 32-bit
Flash1 Chip
Spansion FL032AIF
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
ESMT M12L128168A
ETH chip1
Switch
Marvell 88E6060
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
5 VDC, 2.5 A
Connector type
barrel
Serial Port (UART)
yes
JTAG Port
yes
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 793 additional devices
of which 224 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 357 additional devices
of which 193 are D-Link devices

Default Channel(s)
6
3rd Party Firmware Support
DD-WRT • (List)
Retail
Availability rare
FCC approval date 22 August 2007
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 108 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented D-Link device with specifications, see D-Link.

108 Mbps - 2.4GHz 802.11g = G108 class


Overview

Product pages:

Model is laid off and not found on US or UK versions of site.

Links of Interest

On the DD-WRT wiki

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = v24 rc7 - build 9120

In order to flash your router you need to do the following steps:

  • Download TFTPserver, it can be downloaded from here
  • Download firmware from here
  • Download Putty client or you can use any telnet clients(try to stay away from Windows built in telnet)
  • Change your local IP adress to a static 192.168.0.2 and subnet mask to 255.255.255.0
  • Connect an ethernet cable between your computer and DIR-400's WAN port
  • Prepare Putty telnet session -- 192.168.0.1 port 9000
  • Start pinging your router throught a command line. Type ping 192.168.0.1 -n 900 (You don't really need to ping that many times)
  • Power DIR-400 router on and wait for 2nd successful ping and then initiate putty telnet session.
  • Press CTRL-C as soon as you see that boot script is executing (if you are using Putty ver. 0.60 or newer then you don't have to worry about this)
  • Start TFTP server with linux.bin in TFTP root directory

If you did everything right then you should see the following on the window of putty:

== Executing boot script in 1.140 seconds - enter ^C to abort
^C 
RedBoot>

Type ip_address -l 192.168.0.1/24 -h 192.168.0.2 and press Enter

You should see the following:

RedBoot> ip_address -l 192.168.0.1/24 -h 192.168.0.2
IP: 192.168.0.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.0.2

Type fis init and then

RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)?

Type y and press Enter. Wait until the process is complete:

About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
And a descriptor for the configuration data size = 10000
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .

Type load -r -b 0x80041000 linux.bin and press Enter

RedBoot> load -r -b 0x80041000 linux.bin
Using default protocol (TFTP)
Raw file loaded 0x80041000-0x803bafff, assumed entry at 0x80041000

Type fis create linux and press Enter (this one will take a while. DO NOT UNPLUG YOUR ROUTER)

RedBoot> fis create linux
... Erase from 0xbfc40000-0xbffba000: ........................................................
... Program from 0x80041000-0x803bb000 at 0xbfc40000: ........................................................
prog_ok
flash_addr = 0xbfc40000
mem_addr = 0x80041000
entry_addr = 0x80041000
length = 0x37a000
img_size = 0x37a000
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: . 

Type fconfig and press Enter

RedBoot> fconfig 
Run script at boot: true 

Press Enter

Run script at boot: true
Boot script:
.. fis load -l linux
.. exec
Enter script, terminate with empty line

Type fis load -l linux and press Enter

>> fis load -l linux

type exec and press Enter

>> exec

just press Enter

>> 
Boot script timeout (1000ms resolution): 2 

press Enter

Use BOOTP for network configuration: false

press Enter

Gateway IP address: 

press Enter

Local IP address: 192.168.0.1 

press Enter

Local IP address mask: 255.255.255.0

press Enter

Default server IP address: 192.168.0.100 

press Enter

Console baud rate: 9600 

press Enter

GDB connection port: 9000 

press Enter

Force console for special debug messages: false  

press Enter

Network debug at boot time: false 

press Enter

Update RedBoot non-volatile configuration - continue (y/n)? 

type y and press Enter

Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .

Type reset and press Enter

RedBoot> reset
  • Re-connect an ethernet cable between your computer and DIR-400’s LAN port
  • Change your local IP adress to a static 192.168.1.2 and subnet mask to 255.255.255.0

Your router will be accessible at http://192.168.1.1

Pictures