D-Link DI-714P+ rev B1
b | |
---|---|
Enhanced 2.4GHz (802.11b) Wireless Router plus Print Server | |
![]() | |
Support | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
Platform | |
Brand • Model • Rev |
D-Link DI-714+ B1 |
FCC ID | |
Type |
wireless router, print server |
Wireless class |
B22 |
CPU1 |
Conexant CX82110-51 |
Flash1 Chip |
AMD Am29LV800BB-90EC |
Flash1 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> |
RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Chip |
GLT GLT5640L16-6TC |
ETH chip1 |
Conexant CX82110-51 |
Switch |
Kendin KS8995X |
Ethernet Port Count |
1-WAN 4-100MbE-LAN |
802dot11 OUI: none specified | |
Expansion IF types |
Parallel |
Paralell Ports |
1 |
Power |
5 VDC, ? A |
Connector type |
barrel 5.5 mm (OD) 2.2 mm (ID) 10 mm (LEN) |
Flags |
schematics |
Other | |
Default IP address |
192.168.0.1 |
Default login user |
admin |
Default login password |
Leave blank |
Default SSID |
default |
Manuf/OEM/ODM | |
Retail | |
FCC approval date | 12 February 2003 |
ASIN |
B00006SKKD ![]() |
Country of manuf | Taiwan |
Radio 1 | |
Radio1 module | |
Radio1 module IF |
unknown |
Chip1 | |
Chip2 |
Ralink Model? |
Wireless interface OUI |
none specified |
Antenna Connector Type |
RP-SMA |
Wireless Standard |
IEEE 802.11b |
802.11b |
up to 22 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview[edit]
"103408600Y1" and "WPA400AM-Y1" is silkscreened on the mainboard.
It is possible these units may have differing wireless modules (which do not appear to be standard PCMCIA). This particular one uses a National Datacomm NWH1021. The FCC photos depict the device with an RFMD based DBTel card, however, the FCC photos depict a different main board (probably for the A1 revision).
The OUI of the MAC on the wireless module label is 00:80:C6 (National Datacomm). The OUI on the label affixed to the router is 00:0D:88 (D-Link).
The RP-SMA antenna leads on the case exterior are soldered directly to the wireless module.
Links of Interest[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
Flashing[edit]
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
Reverting[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
JTAG-Serial Info[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
USB Info[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
vlan Info[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
Pictures[edit]
- from D-Link
Notes[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
Hardware Modification[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
See also[edit]
![]() | This section is empty. You can help by adding to it. (September 2020) |
- D-Link
- Embedded system/wireless router
- Embedded system/print server
- Embedded System Conexant
- Embedded System CX82110-51
- Embedded System Kendin
- Embedded System KS8995X
- Manuf AMIT
- Embedded System Texas Instruments
- Embedded System ACX100
- Embedded System Ralink
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Conexant
- Kendin
- Texas Instruments
- Ralink
- Embedded System
- FCC Photo's Needed
- English Documentation