Cisco DDR2200-CL

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
DDR2200-CL ADSL2+ Residential Gateway
Wikipedia
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
Cisco DDR2200-CL
FCC ID
Type
wireless router, analog phone gateway, dsl modem
CPU1
Broadcom BCM6358
CPU1 Type
BMIPS4350
CPU1 Type2
BMIPS4350
CPU1 Speed
not specified ( 2 cores )
CPU1 Speed2
not specified ( 2 cores )
Flash1 Chip
Spansion Model?
Flash1 Size
? MiB
RAM1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip
Nanya NT5DS16M16CS-5T
RAM2 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM2 Chip
Nanya NT5DS16M16CS-5T
ETH chip1
Broadcom BCM6358
Switch
Marvell 88E6061
Ethernet Port Count
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified
Ethernet OUI: 50:39:55

Expansion IF types
Mini PCI, USB 2.0, USB 2.0 (slave)
Mini PCI slots
1
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1.67 A
Connector type
barrel
Flags:
HomePNA 3.0 (coaxial), ADSL2+
Other

Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 154 additional devices
of which 0 are Cisco devices
Default login user: admin
Default login password: 1PTV-ADM1N

Manuf/OEM/ODM
Retail
FCC approval date 22 December 2009
Country of manuf China
Radio 1
Radio1 module
Radio1 module IF
Mini PCI
Chip1
Ralink RT2561
Chip2
Ralink RT2527
Wireless interface OUI
none specified
Antenna Connector Type
none (internal)
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Cisco device with specifications, see Cisco.

54 Mbps - 2.4GHz 802.11g = G54 class


Overview

Per FCC photos...

  • There are two Broadcom SoCs on the board.
    • both of which are a BCM6358KFBG
  • The HomePNA controller is a CopperGate CG3011QIR-10.
  • There is a Legerity chip on-board for VoIP support.
  • The wireless module has a MAC label w/ a 00:26:82 (Gemtek) MAC on it.

This device is/was used by the following ISPs...

Default settings are per the FCC manual. They may very well be inaccurate.

Additional login credentials of support:1PTV-SUPP0RT and user:user are specified.
CenturyLink specifies the user login as user:user.

If the 50:39:55 OUI is used for the WLAN interface, the default SSID format may be CiscoXXXX (where XXXX is a number).

The power adapter shown in the FCC external photos is an Asian Power Devices Inc. DA-30H12 rev 1.2 (100-240VAC ~ 50-60 Hz, 0.7A max. -> 12VDC, 2.5A).