Celeno VXT1836

From TechInfoDepot
Jump to navigationJump to search
an (A450)
VXT1836 Wireless Video Extender Kit
Video Bridge Unit
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Celeno VXT1836
FCC ID
Type
access point, station
CPU1
Celeno-Ralink CL1830
CPU1 Type
MIPS 74Kc
CPU1 Speed
not specified
Flash1 Chip
Macronix MX29LV640EBTI-70G
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Nanya NT5TU32M16CG-25C
ETH chip1
Celeno-Ralink CL1830
ETH chip2
IC+ IP101A
ETH chip3
IC+ IP101A
Ethernet Port Count
2-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Other

Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 0 are Celeno devices

Manuf/OEM/ODM
Zinwell ZW-N5000
Retail
FCC approval date 10 May 2013
Radio 1
Chip1
Celeno-Ralink CL1830
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
3x3:3
Wireless Standard
IEEE 802.11a/n
802.11n
up to 450 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

For a list of all currently documented Celeno device with specifications, see Celeno.

450 Mbps - 3SS 5GHz 802.11n (40MHz chan.) = A450 class

Overview

"ZW-N5000 Ver:05" is silkscreened on the board in the FCC photos.

The device appears to be using three Skyworks (SiGe) SE5012T / 5012T 5GHz FEMs.

Per the FCC manual...

  • The default credentials are admin:admin
  • In AP mode..
    • Default IP of 10.0.0.2 (w/ 255.0.0.0 Net Mask) *In STA mode..
    • Default IP of 10.0.0.10 (w/ 255.0.0.0 Net Mask)*The default SSID pattern shown as an example is VXT1800'''XXXXXX
    • XXXXXX is the last three octets of the BSSID (upper case letters)
    • There are a fair number of hits for this pattern on WiGLE (93 w/ 80:1F:02 [Edimax] OUIs)
    • The actual SSID pattern may be VXT1836'''XXXXXX