Celeno VXT1300

From TechInfoDepot
Jump to navigationJump to search
an (A300)
access point,bridge
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Celeno VXT1300
FCC ID
IC ID
Type
access point, bridge
CPU1
Celeno CL1300
CPU1 Type
MIPS 4KEc
CPU1 Speed
not specified
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Celeno CL1300
ETH chip2
IC+ IP101A
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:0B:8C (3 E, 3 W)
Ethernet OUI: 00:0B:8C (3 E, 3 W)

Expansion IF types
none specified
Power
12 VDC, ? A
Connector type
barrel
Other

Default IP address: 10.0.0.2
the IP 10.0.0.2 is used by 9 additional devices
of which 0 are Celeno devices

Retail
FCC approval date 04 November 2009
Radio 1
Chip1
Celeno CL1300
Chip2
Maxim MAX2828
Chip3
Maxim MAX2828
Wireless interface OUI
00:0B:8C
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 FCC ID
Flextronics MWB1305XQOMWB-1305

For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Maxim chipsets with specifications, see Maxim.

For a list of all currently documented Celeno device with specifications, see Celeno.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class

Overview

  • The Celeno logo, "Patent Pending Celeno Proprietary", "CELENO VXT1300 AP", and "P/N BOARD: PCB00020" is silkscreened on the board in the FCC photos.
  • Per the FCC test report, the device "utilizes 4 internal printed antennas: two transmit and two receive".

The FCC manual states the default IP is 10.0.0.2.