Gemtek BCM94309MP

From TechInfoDepot
Jump to navigationJump to search
Tagline Needed
Brand • Model • Rev
Gemtek BCM94309MP (for Quanta)
Mini PCI
ID:14e4:4324 (4 addl. devices) SS: 14e4:0421
Windows: PCI\VEN_14E4&DEV_4324&SUBSYS_042114E4
Broadcom BCM4309
Broadcom BCM2050
Broadcom BCM2060
Interface OUI
Antenna Info
Wireless Standards
IEEE 802.11a/b/g
Probable Linux driver
b43legacy or b43, depending on core revision (both are in backports)
PCI ID first seen in kernel v2.6.17 (2006-06-18)
(see also passys)
FCC approval date 09 June 2003
Country of manuf Taiwan
Broadcom BCM94309MPQDS-BRCM1007
Dell TrueMobile 1400 Dual-Band WLAN miniPCI CardQDS-BRCM1007
Dell Wireless 1450 (DW1450)QDS-BRCM1007

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

lspci -nnv dump[edit]

03:06.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11a/b/g [14e4:4324] (rev 02)
        Subsystem: Broadcom Corporation Device [14e4:0421]
        Flags: bus master, fast devsel, latency 64, IRQ 22
        Memory at f9bfe000 (32-bit, non-prefetchable) [size=8K]
        Kernel driver in use: b43-pci-bridge
        Kernel modules: ssb

ssb + b43legacy info dump[edit]

[  182.492431] ssb: Found chip with id 0x4306, rev 0x02 and package 0x00
[  182.492449] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
[  182.492460] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[  182.492470] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
[  182.492478] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[  182.492487] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
[  182.492496] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[  182.497373] ssb: Sonics Silicon Backplane found on PCI device 0000:03:06.0
[  182.510339] b43legacy-phy2: Broadcom 4306 WLAN found (core revision 4)
[  182.557383] b43legacy-phy2: Loading firmware b43legacy/ucode4.fw
[  182.557560] b43legacy-phy2: Loading firmware b43legacy/pcm4.fw
[  182.557601] b43legacy-phy2: Loading firmware b43legacy/b0g0initvals2.fw
[  182.557963] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[  182.581329] b43legacy-phy2 ERROR: FOUND UNSUPPORTED PHY (Analog 1, Type 0, Revision 2)
[  182.581355] b43legacy: probe of ssb0:2 failed with error -95
[  182.581428] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[  183.029152] b43legacy-phy2: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
[  183.095119] IPv6: ADDRCONF(NETDEV_UP): wlan16: link is not ready