Belkin F9K1003
From TechInfoDepot
Jump to navigationJump to searchbgn | |
---|---|
N450 Wireless N+ Router | |
![]() | |
Homepage | |
Support | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
Platform | |
Brand • Model • Rev |
Belkin F9K1003 v1 |
FCC ID | |
IC ID | |
Type |
wireless router |
Wireless class |
N450 |
CPU1 |
Ralink RT3883 |
CPU1 Speed |
500 MHz |
Flash1 Chip |
Macronix MX25L6406EM2I-12G |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
EtronTech EM68B16CWPA-25H |
ETH chip1 |
Ralink RT3883 |
Switch |
Realtek RTL8367R |
Ethernet Port Count |
1-WAN 4-1GbE-LAN |
Stock bootloader |
U-Boot 1.7.4 Ralink 3.5.2.0 |
Stock FW OS |
Linux 2.6.22 |
Expansion IF types |
none specified |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (57600 8N1), JP12 |
Other | |
Default IP address |
192.168.2.1 |
Default SSID |
belkin.XXX |
Manuf/OEM/ODM | |
Retail | |
FCC approval date | 27 April 2011 |
UPC |
722868817841 (UPC DB, On eBay) |
ASIN |
B004N625A0 ![]() |
Country of manuf | China |
Radio 1 | |
Chip1 |
Ralink RT3883 |
Wireless interface OUI |
08:86:3B |
Antenna Connector Type |
soldered |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 450 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview[edit]
A triangular RoHS logo / indicator and "P/N: 141710520000J R01A" is silkscreened on the board.
2.4 GHz only, 10/100/1000 Ethernet
The default SSID pattern is belkin.XXX where XXX is the last three hex
- digits of the wireless interface MAC address (lower case letters).
- An example SSID is belkin.618 where the WLAN MAC is 08:86:3B:27:16:18.
Links of Interest[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Flashing[edit]
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Reverting[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
JTAG-Serial Info[edit]
JTAG[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Serial[edit]
Serial Pinouts[edit]
^ to RAM © (GND) © (RxD) © (TxD) ® [3.3] NC J12 v to shield
Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - Communication - HyperTerminal Enter a name for the connection, Click ok Choose com port you adapter is plugged into, Click ok Set: Bits per second = 57600 Data Bits = 8 Parity = none Stop bits = 1 Flow control = none Click ok Click File - Save As, and select a place to save it to so you don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it Serial line = The COM port your using for serial (ie. COM3) Speed = 57600 Click on Serial under Connection Serial line to connect to = same as above (Serial line) Speed (baud) = 57600 Data bits = 8 Stop bits = 1 Parity = none Flow control = none Click Session Enter a name for your connection under saved sessions Click Save Click Open
Serial Recovery[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
USB Info[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
vlan Info[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Pictures[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Notes[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Hardware Modification[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
See also[edit]
![]() | This section is empty. You can help by adding to it. (May 2020) |
Categories:
- Belkin
- Embedded system/wireless router
- Embedded System Ralink
- Embedded System RT3883
- Embedded System Realtek
- Embedded System RTL8367R
- Manuf Arcadyan
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Ralink
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation