Belkin F5D7230-4 vA

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
Wireless G Router
Belkin F5D7130-4 01a.jpg
Support
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Belkin F5D7230-4 vA
FCC ID
IC ID
Type
wireless router
Series
F5D7230-4
CPU1
CPU1 Type
MIPS 4KEc
CPU1 Speed
180 MHz
Flash1 Chip
Eon P16-75HCP
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip
ISSI IC42S16400F-7TL
ETH chip1
Switch
Atheros AR8216
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:1C:DF (16 E, 32 W)
Ethernet OUI: 00:1C:DF (16 E, 32 W)

Stock FW OS
SuperTask!
Expansion IF types
none specified
Power
9 VDC, 1 A
Connector type
barrel
Flags:
boot log
Other

Default SSID: belkin54g (12 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 99 are Belkin devices

Manuf/OEM/ODM
Retail
FCC approval date 14 March 2008
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
00:1C:DF
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Belkin F5D7230-4 v1BroadcomBroadcomBroadcom
Belkin F5D7230-4 v1 (v1444)BroadcomBroadcomBroadcom
Belkin F5D7230-4 v2BroadcomBroadcomBroadcom
Belkin F5D7230-4 v3BroadcomBroadcomBroadcom
Belkin F5D7230-4 v4MarvellMarvellMarvell
Belkin F5D7230-4 v5AtherosAtheros
Belkin F5D7230-4 v6MarvellMarvellMarvell
Belkin F5D7230-4 v7AtherosAtheros
Belkin F5D7230-4 v8BroadcomBroadcom
Belkin F5D7230-4 v9RealtekRealtekRealtek
Belkin F5D7230-4 vAAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Belkin device with specifications, see Belkin.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"141400520023J REV: 0A1" is silkscreened on the board in the FCC photos. The same board part number is on the Belkin F5D7234-4 v3.

"141400520023J REV: 01"" is silkscreened on a production model board.

It would appear (and is being assumed) that the SuperTask! RTOS is used on this device.

Links of Interest

JTAG-Serial Info

Serial

Boot Log (from above DD-WRT forums post)

Boot Log
ar531xPlus rev 0x00000090 boot loader startup...
Flash initialized
SDRAM initialized
Cache initialized

Copy program from 0xbfc00000 to 0x80520000, length 0x0000d284 bytes ... done
Jump to SDRAM 0x80520cb4 [0x10000008, 0x00000000, 0x00000000]
Clear BSS section ... done
Stack: 0x8053f0b0
Heap: 0x8053f0c0



=========================================================================
 Wireless Gateway WG4005G 1-LF-AK Loader 0.05 build Jan  3 2008 16:41:29
                  Arcadyan Technology Corporation
=========================================================================

Copying boot params.....DONE
cpuFreq=240000000 sysFreq=60000000 cntFreq=120000000

Press any key to enter command mode ...
Checking Valid Image in Flash... Passed.
failed(4)

Try to find image for running...
Valid Code found in the Flash
done
Uncompressed size = 2455721
I am going to run the Code image from 80001000




firmware startup...
Stack: 0x807bcd50
Heap: 0x807bcd60
[GPIO FLOW] SetGpio() Begin ..
/home/titan_liu/Project/AP65_Linux/Broadband_SuperTask/ttf2004_GW61_Vista/ttf2007_GW61_Vista/source/firmware/hardware/ar5312/ar531xbsp.c:bsp_gpio_init is called
[GPIO FLOW] SetGpio() End.
##### _ftext      = 0x80001000
##### _fdata      = 0x80231060
##### __bss_start = 0x802588A9
##### end         = 0x807ACD50
##### stack size  = 0x10000
##### Backup Data from 0x80231060 to 0x807BCD50, size = 161865 bytes

install_exception 
Installing TLB Refill exception handler from 80008D00 to 80000000, size=192
Installing General exception handler from 80008DC0 to 80000180, size=16
Installing Interrupt exception handler from 80008DD0 to 80000200, size=160
misc_int_init 
mips_int_enable : 0x00000400
Connect the AHB interrupt
sysBoardDataInit 
Init the GPIOs !!!
Enable arbitration for SOC devices !!!
cpuFreq=184000000 sysFreq=40000000 cntFreq=92000000
should call WLanReset.. 
AR531X_TIMER=00061A6D
AR531X_RELOAD=00061A80
time1 0003a92d, time2 0003a921
AR531X_IMR=00000028
mips_cp0_status=10000401
mips_cp0_cause=00800000
Runtime code version: A.00.11
System startup...
[INIT] Memory COLOR 0, 800000 bytes ..
[INIT] Memory COLOR 1, 500000 bytes ..
[INIT] Memory COLOR 2, 351200 bytes ..

Flash Found. It is 2MB Flash....
Set flash memory layout to ar531xmac_set_macaddr : next = 10Boot Parameters found !!!
Bootcode version: 0.05
Serial number: BE701644386
Hardware version: 01
sizeof(struct III_Config_t) is 65492
>>> etcpip_init_config() copy over gSKUID=17, ChannelBound=13, CountryCode=8210
default route: 0.0.0.0
BufferInit:
BUF_HDR_SZ=48 BUF_ALIGN_SZ=4 BUFFER_OFFSET=112
BUF_BUFSZ0=272 BUF_BUFSZ1=1776
NUM_OF_B0=0 NUM_OF_B1=600
BUF_POOL0_SZ=0 BUF_POOL1_SZ=1094400
sizeof(BUFFER0)=320,sizeof(BUFFER1)=1824
*BUF0=0x805caf78 *BUF1=0x804bfc68
Altgn *BUF0=0x805caf80 *BUF1=0x804bfc70
End at BUF0:0x805caf80, BUF1:0x805caf70

BUF0[0]=0x805caf80 BUF1[0]=0x804bfc70

buffer0 pointer init OK!
buffer1 pointer init OK!
gConfig.Interface[0].IP_Addr = 127.0.0.1
gConfig.Interface[0].Subnet_Mask = 255.255.255.255
time = 08/01/2003, 00:00:00
Interface 0 ip = 127.0.0.1

gConfig.Interface[1].IP_Addr = 192.168.0.31
gConfig.Interface[1].Subnet_Mask = 255.255.255.0
ar531xmac_init: ifno=1, initstr=UNIT=0 VLAN=1
/home/titan_liu/Project/AP65_Linux/Broadband_SuperTask/ttf2004_GW61_Vista/ttf2007_GW61_Vista/source/firmware/hardware/ar5312/ar531xbsp.c:sysEnetInit is called
ae531xEndLoad: loading device ...
ae531xEndLoad: unit=0, pDmaBuf=0xa030d694, dmaBufSize=5136, txDescCount=128, rxDescCount=128, clCount=256
ae531xEndLoad: System param: mac=b0500000, dma=b0501000, ivec=4, ilev=1000
ae531xEndLoad: Flash ea = xx:xx:xx:xx:xx:xx
ae0 qt = 1, buf begin = 80000000, buf end = 80000000
ae0 qt = 1, drsc begin = a030d6a0, desc end = a030e08c
Tx Queue b=0xa030d6a0, e=0xa030e08c, c=0xa030d6a0, s@c=0x       0
ae0 qt = 2, buf begin = 804bfce2, buf end = 804f85c2
ae0 qt = 2, drsc begin = a030e0a0, desc end = a030ea8c
Rx Queue b=0xa030e0a0, e=0xa030ea8c, c=0xa030e0a0, s@c=0x80000000
ae531xMemInit: Memory setup complete.
enter athr_VLANInit
ae0 Phy Setup Failed
Please check the ethernet cable on port 0!
eth0: duplex 0, link 0
ae_SetMacFromPhy: enet0 as full duplex, 10Mbps
ae0: setting TXDP=0xa030d6a0 RXDP=0xa030e0a0
ae0 Verify MAC address B1DF1C00 00000985 
  sb = xx xx xx xx xx xx
ae531xRxFilterConfig: MacControl = 1014000C
ae531xEndLoad: Done loading, pDrvCtrl=8030D48C txQ=8030D4B8 rxQ=8030D4CC
ae_unitLinkGained :
ae_SetMacFromPhy: enet0 as full duplex, 10Mbps
call ae531xStart
ae531xStart: Interrupt connected 0x0 0x4 0x80176EC8 0x8030D48C.
ae531xDmaIntEnable 0001a1e2
ae531xStart: complete. im = 0001A1E2, is = 00660004.
mips_int_enable : 0x00001400
Wake up DHCP client
ar531xmac_init: enet0 set to VLAN mode
ar531xmac_init: enet0 interface 1 registered to VLAN 1

  DmaStatus  = 0x  660004
  DmaBusMode = 0x    2084
  DmaRxBase  = 0x  30e0a0
  DmaTxBase  = 0x  30d6a0
  DmaControl = 0x  202002
  DmaIntr    = 0x   1a1e2
  MacControl = 0x1014000c
  MacAddrHi  = 0x     xxx
  MacAddrLo  = 0xxxxxxxxx
  MacVlan1   = 0x    xxxx
  MacVlan2   = 0x       x

Rx Queue b=0xa030e0a0, e=0xa030ea8c, c=0xa030e0a0, s@c=0x80000000
Current Rx buffer = 0x  4bfce2
Tx Queue b=0xa030d6a0, e=0xa030e08c, c=0xa030d6a0, s@c=0x       0
Current Tx buffer = 0x       0
time = 08/01/2003, 00:00:00
ae531xRxFilterConfig: MacControl = 1014000C
Interface 1 ip = 192.168.0.31

ae531xRxFilterConfig: MacControl = 1014000C
gConfig.Interface[2].IP_Addr = 0.0.0.0
gConfig.Interface[2].Subnet_Mask = 0.0.0.0
ar531xmac_init: ifno=2, initstr=UNIT=0 VLAN=2
ar531xmac_init: driver already loaded, number of instances is 2
ar531xmac_init: enet0 set to VLAN mode
ar531xmac_init: enet0 interface 2 registered to VLAN 2

  DmaStatus  = 0x  660004
  DmaBusMode = 0x    2084
  DmaRxBase  = 0x  30e0a0
  DmaTxBase  = 0x  30d6a0
  DmaControl = 0x  202002
  DmaIntr    = 0x   1a1e2
  MacControl = 0x1014000c
  MacAddrHi  = 0x     xxx
  MacAddrLo  = 0xxxxxxxxx
  MacVlan1   = 0x    xxxx
  MacVlan2   = 0x       x

Rx Queue b=0xa030e0a0, e=0xa030ea8c, c=0xa030e0a0, s@c=0x80000000
Current Rx buffer = 0x  4bfce2
Tx Queue b=0xa030d6a0, e=0xa030e08c, c=0xa030d6a0, s@c=0x       0
Current Tx buffer = 0x       0
time = 08/01/2003, 00:00:00
iput_IpLinkUp(ifno=2)> ifp->add_default_route:1
Re-Init NAT data structure
Init NAT data structure
Interface 2 ip = 0.0.0.0

gConfig.Interface[4].IP_Addr = 0.0.0.0
gConfig.Interface[4].Subnet_Mask = 255.255.255.0
[HWLAN] ifno=4 irno=7 port=0x00000000
[HWLAN] pRadio->abolt = 00000000
[HWLAN] pRadio->abolt = 00000000
[HWLAN] gSetting.BasicRate=f 
[HWLAN] apCfgDefaultSet : prepare to set WDS.. 
apInit: Initialize Access Point.
[HWLAN] ar5hwcCreatePhy : ifno:4 pdevInfo=80386748, devno=1
[HWLAN] devno 1 pdevInfo 80386748
[HWLAN] Base address = b0000000, irq 3
Attach AR5212 0x13 0x80386748
[HWLAN] DOMAIN 00008210
[HWLAN] MAC Address=xx-xx-xx=xx-xx-xx 
[HWLAN] wlan1 revisions: mac 11.0 phy 4.8 analog 8.6 eeprom 5.3
[HWLAN] phwChannel 2462, channelFlags 00005400
[HWLAN] size of ATHEROS_DESC hardware part 32
[HWLAN] CACHE_LINE_SIZE 16, AR_DESC_SIZE 128
[HWLAN] AR_HEADER_SIZE 96, AR_BUF_SIZE 1696numDescriptors = 704
<<< Try to NonCache 223264
[HWLAN] wlan1: pDmaBuf=A025A330
[HWLAN] pMemBuf a025a330 pdevInfo->pDmaBuf a025a330
[HWLAN] ar5hwcQueueCreate: semaphore id 802d3aac
[HWLAN] ar5hwcQueueCreate: semaphore id 802d3ac0
[HWLAN] ar5hwcQueueCreate: semaphore id 802d3ad4
[HWLAN] ar5hwcQueueCreate: semaphore id 802d3ae8
[HWLAN] pMemBuf a0276330, pdevInfo->pDmaBuf + pdevInfo->dmaBufSize a0290b50
[HWLAN] muxDevLoad is called for vportNum 10000, loadfn 800d5f3c, vportStr 16: 0: 1
[HWLAN] ioctl CMD=0xb
mips_int_connect: ivec 3 ar5hwcInt 800ba644 pdevInfo 80386748
mips_int_enable : 0x00001C00
[HWLAN] bridgePortAdd : vp, 10000
[HWLAN] bridgePortAdd (base BSS) succeeded for vp1
wlan1 added STA: 00:1c:df:b1:85:09 (2530)
[HWLAN] ifno=4 after call apInit() : .... bg 1 , a 0 .... 
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() .. 
Interface 4 ip = 192.168.0.31

[HWLAN] hwlan_ioctl() .. 
ruleCheck()> Group: 0,  Error: Useless rule index will be truncated
ruleCheck()> Group: 1,  Error: Useless rule index will be truncated
ruleCheck()> Group: 2,  Error: Useless rule index will be truncated
CBAC rule format check succeed !!
reqCBACBuf()> init match pool, Have: 50
Memory Address: 0x80796874 ~ 0x80796e08
reqCBACBuf()> init timeGap pool, Have: 2000
Memory Address: 0x80796e08 ~ 0x807a0a5c
reqCBACBuf()> init sameHost pool, Have: 200
Memory Address: 0x807a0a5c ~ 0x807a237c
CBAC rule pool initialized !!
Init NAT data structure
No default route, no need to reinit the NAT data structure
RUNTASK id=2 if_task if0...
RUNTASK id=3 if_task if1...
RUNTASK id=4 if_task if2...
RUNTASK id=5 if_task if4...
RUNTASK id=6 timer_task...
RUNTASK id=7 conn_mgr...
RUNTASK id=8 main_8021x...
RUNTASK id=9 main_lltd...
RUNTASK id=10 period_task...
RUNTASK id=11,  dhcp_clt task success...
RUNTASK id=12 pptp_callmgr...
httpd: listen at 192.168.0.31:80
HTTPD TIMER_RESOURCE:5, FS_RESOURCE:6
RUNTASK httpd...
RUNTASK id=15 dnsproxy...
UPnP is enabled
UPNP Device initialize success! slot=16

>>> belkin_wan_cfg task runs successfully, task_id = 17
RUNTASK id=18 wscmain...
RUNTASK id=19 wsc_Send_eap_packet...
RUNTASK id=20 wsc_Send_UPNP_packet...
RUNTASK id=21 WSC_WaitUserAction_Task...
Starting Multitask...
load_lang_table to : English.cpz
get_language /www/doc/English.cpz, size=70207, >>>>>>>>
RUNTASK id=22 hwlan_light_isr...
RUNTASK id=23 led_task...
MTstart2() begin  ...
init psock cnt=12
turn on hwlan light
*********************************************
Wi-Fi Simple Config Application - Intel Corp.
Version: Build 1.02, May@#*@#*@#*EAP-WSC: Entered eap_wsc_init *#@*#@*#@
Entered udp_read
wsc_Send_eap_packet:udpFdupnp_wcn:16;;udpFdupnp:1WSC_WaitUserAction:wait user action:2
 ser action:2
*********************************************
Initializing stack...
---------in wsc init----------
-8
---------sizeof(uint32)=4
----------sizeof(uint-long)=4
----------sizeof(uint32)=2
[18]pthread_cond_init: 0
[18]pthread_mutex_init: resource No. 26
[18]pthread_mutex_init: resource No. 27
[PORTABLITY]:WscCreateThread--------------WscCmd:ActualCBThreadProc: Started
------
 
======================
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x8002C168  PC=0x8002C26C
0x00000003,Function=0x80upnp_Init: flag=0
SSDP Initialization completed0eted...
0x00000004,Function=0x80003020  PC=0x80003018
0x00000005,Function=0x00000000  PC=0xFFFFFFF8

============.  PC=0xFFFFFFF8
GenaInit : event_hook is NULL!!
=nt_hook is NULL!!
Atheros_NetTask running ...
[18]pthread_cond_init: 1
[18]pthread_mutex_init: resource No. 28
[18]pthread_mutex_init: resource No. 29
[WscCmd:ActualUIThreadProc: Started.
ActualUIThreadProc: wait q
PtualUIThreadProc: wait q

======================
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x8002C168  PC=0x8002C33C
0x00000003,Function=0x8002BFE4  PC=0x8002C064
0x00000004,Function=0x80003020  PC=0x80003018
0x00000005,Function=0x00000000  PC=0xFFFFFFF8

======================
MasterControl constructor
WscCmd::MC instantiated ok
[18]pthread_cond_init: 2
[18]pthread_mutex_init: resource No. 30
[18]pthread_mutex_init: resource No. 31
[PORTABLITY]:WscCreateThread--------------------
 
======================
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x801B0F18  PC=0x801B100C
0x00000003,Function=0x8002C168  PC=0x8002C3C4
0x00000004,Function=0x8002BFE4  PC=0x8002C064
0x00000005,Function=0x80003020  PC=0x80003018
0x00000006,Function=0x00000000  PC=0xFFFFFFF8

======================
[18]pthread_mutex_init: resource No. 32
[PORTABLITY]:pthread_mutex_init--------------------
 CTransport Construction
[18]pthread_cond_init: 3
[18]pthread_mutex_init: resource No. 33
[18]pthread_mutex_init: resource No. 34
[PORTABLITY]:WscCreateThread--------------------
 
======================
0x00000000,Function=0x800A50B4  PC=0x80In CTransport::ActualCBThreadProc
ActualCBThreadProc: Calling Dequeue
0A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x801AFD70  PC=0x801AFE18
0x00000003,Function=0x801B0F18  PC=0x801B1174
0x00000004,Function=0x8002C168  PC=0x8002C3C4
0x00000005,Function=0x8002BFE4  PC=0x8002C064
0x00000006,Function=0x80003020  PC=0x80003018
0x00000007,Function=0x00000000  PC=0xFFFFFFF8

======================
MC::Init: Init complete ok
WscCmd::MC intialized ok
WscCmd::Init ok, starting stack...
Info::ReadConfigFile: Called
Info::ReadConfigFile:€"ç
Info::ReadConfigFile:File open ok
******************uuid_p:0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx*****
mp_deviceInfo->uuid[i]:
x-x-x-x-x-x-x-x-xx-x-x-xx-xx-xx-xx-x-
mp_deviceInfo->macAddr:xx:xx:xx:xx:xx:xx
gSetting.dot1x.if_entry[0].enableWEP:0
authTypeFlags is 1 ,encrTypeFlags is 1 ,m_nwKey is , key len is 0
 ssid is belkin54g
S, 14e
E, 1c1
RegistrarSM constructor
[18]pthread_cond_init: 4
[18]pthread_mutex_init: resource No. 35
[18]pthread_mutex_init: resource No. 36
[PORTABLITY]:WscCreateThread--------------------
 
======================
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x800093CC  PC=0x800094B8
0x00000003,Function=0x801C2128  PC=0x801C2138
0x00000004,Function=0x801B4090  PC=0x801B4238
0x00000005,Function=0x801B15B8  PC=0x801B171C
0x00000006,Function=0x8002BFE4  PC=0x8002C094
0x00000007,Function=0x80003020  PC=0x80003018
0x00000008,Function=0x00000000  PC=0xFFFFFFF8

======================
[18]pthread_mutex_init: resource No. 37
[PORTABLITY]:pthread_mutex_init--------------------
 RegistrarSM constructor
[18]pthread_cond_init: 5
[18]pthread_mutex_init: resource No. 38
[18]pthread_mutex_init: resource No. 39
[PORTABLITY]:WscCreateThread--------------------
 
======================
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x800093CC  PC=0x800094B8
0x00000003,Function=0x801B4090  PC=0x801B42D0
0x00000004,Function=0x801B15B8  PC=0x801B171C
0x00000005,Function=0x8002BFE4  PC=0x8002C094
0x00000006,Function=0x80003020  PC=0x80003018
0x00000007,Function=0x00000000  PC=0xFFFFFFF8

======================
c_devPwd:org:12345670
**************mcp_devPwd:12345670;;
in startMonitor....
CInbEap Construction
Sizeof(WSC_NOTIFY_DATA) = -2143184464
---test--sizeof(WSC_NOTIFY_DATA) = 36
[18]pthread_cond_init: 6
[PORTABLITY]:WscCreateEvent--------------------
 Entered udp_open
Socket open successful, sd: -2143184480
Entered udp_open
Socket open successful, sd: -2143184480
Entered udp_bind
Binding successful for socket [-2143184496]
[PORTABLITY]:WscCreateThread--------------------
 
====================In CInbEap::StaticRecvThread
CInbEap::ActualRecvThread Started
Entered udp_read
=ead Started
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x801C06F0  PC=0x801C0728
0x00000003,Function=0x801AFE80  PC=0x801B008C
0x00000004,Function=0x801B4090  PC=0x801B43A4
0x00000005,Function=0x801B15B8  PC=0x801B171C
0x00000006,Function=0x8002BFE4  PC=0x8002C094
0x00000007,Function=0x80003020  PC=0x80003018
0x00000008,Function=0x00000000  PC=0xFFFFFFF8

======================
in startMonitor....
CInbUPnPDev Construction
Entered udp_open
Socket open successful, sd: -2143184480
Entered udp_open
Socket open successful, sd: -2143184480
Entered udp_bind
Binding successful for socket [-2143184496]
CInbUPnPDev StartMonitor
[PORTABLITY]:In CInbUPnPDev::StaticUPnPThread
end UPnPCreateMicroStack
Entered udp_read
Wad

======================
0x00000000,Function=0x800A50B4  PC=0x800A50F4
0x00000001,Function=0x801AC74C  PC=0x801AC7DC
0x00000002,Function=0x801C15E4  PC=0x801C1630
0x00000003,Function=0x801AFE80  PC=0x801B008C
0x00000004,Function=0x801B4090  PC=0x801B43B0
0x00000005,Function=0x801B15B8  PC=0x801B171C
0x00000006,Function=0x8002BFE4  PC=0x8002C094
0x00000007,Function=0x80003020  PC=0x80003018
0x00000008,Function=0x00000000  PC=0xFFFFFFF8

======================
MC::SwitchModeOn: Exit
MC::StartStack: Informing app of mode
-WscCmd::CallbackProc Enqueue done
MC::SwitchModeOn: Done callback
exit ws@@[25]pthread_mutex_unlock: the res is free 26-- -2145576636
WscCmd:ActualCBThreadProc: CB_MAIN_PUSH_MODE recd

c MODE: Access Point *******
******* MODE: Access Point *******
-@@[29]pthread_mutex_unlock: the res is free 28-- -2145574540
*******p_header->eType:1

Options:
0. Quit
1. Get configured
2. Get configured via push-button
3. Get configured using IEs
Enter selection: ***gp_mc->mp_info->GetSwitchMode():1
mp_info->GetSwitchMode():1:e_currMode:1,,e_targetMode:3
mp_deviceInfo->authTypeFlags:1
mp_deviceInfo->encrTypeFlags:1
********cp_devPwd:12345670*****
mp_deviceInfo->authTypeFlags:1
mp_deviceInfo->encrTypeFlags:1
MC::SetBeaconIE: call to trans->SetBeaconIE() ok
MC::SetProbeRespIE: call to trans->SetProbeRespIE() ok
Waiting for Registrar to connect...
WscCmd::unconfig initiated
ActualUIThreadProc: wait q
[HWLAN] Ready