Arris BGW210-700

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC22002R)
AT&T Arris BGW210-700 802.11b/g/n/ac 400mW Bonded
VDSL2 Wireless Voice Gateway 4 x Gigabit Ports
Arris BGW210-700.jpg
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Arris BGW210-700
FCC ID
Type
Fiber CPE, wireless router, dsl modem, VoIP phone
CPU1
Broadcom BCM63148
CPU1 Type
ARM Cortex-A9 (v7)
CPU1 Speed
1.0 GHz ( 2 cores )
CPU2
Quantenna QT3840BC
CPU2 Type
ARC 700
CPU2 Speed
500 MHz ( 2 cores )
Flash1 Chip
Spansion Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Broadcom BCM63148
Switch
Broadcom BCM63148
Ethernet Port Count
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types
USB 3.0
USB ports
2
USB Hub Compatible
Untested
Flags:
DFS (master)
Other

Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 155 additional devices
of which 2 are Arris devices

Retail
FCC approval date 01 December 2016
ASIN B07BZC72TB Flag of the United States.svg
Radio 1
Chip1
Quantenna Model?
Chip2
Quantenna QT2518B
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
4x4:4
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1733 Mbps
802.11n
up to 600 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
Radio 2
Chip1
Broadcom Model?
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
3x3:3
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 450 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.

For a list of all currently documented Arris device with specifications, see Arris.

1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.),
450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AC2200 class

Overview

"ARRIS", "BGW210", and "HW1.3A" is silkscreened on the board.

"20MHZ operation is not supported in the DFS bands"

Notes

Bridge mode

1. Login to the BGW210-700's web-based configuration interface in your web browser using the link: https://192.168.1.254

2. Go to the "Home Network" tab -> "Wi-Fi" tab

3. Set Home SSID Enable to "Off"

4. Set Guest SSID Enable to "Off"

5. Set 2.4 GHz Wi-Fi operation to "Off"

6. Set 5 GHz Wi-Fi operation to "Off"

7. Go to the "Firewall" -> "Packet Filter" tab. Click on the "Disable Packet Filters" button.

8. Go to the "Firewall" -> "IP Passthrough" tab. Select "Passthrough" in the "Allocation Mode" option

9. Do not enter anything for the "Default Server Internal Address". Leave this field blank

10. In the "Passthrough Mode" selection choose "DHCPS-Fixed".

11. Type in the routers MAC address for your router under "Manual Entry". The MAC address should be in traditional hexadecimal format xx:xx:xx:xx:xx:xx where x's should be values from 0-9 or letters a-f, separated by colons.

12. The Passgthrough DHCP Lease value defaults to 10 minutes. You cannot change this.

13. Click "Save" at the bottom. Go back and check to make sure that the changes were implemented. If not, do it again.

14. Click on the "Device" tab and select "Restart Device". It will take a couple of minutes.