Argus Technologies EW-2101

From TechInfoDepot
Jump to navigationJump to search
b
access point
WikiDevi.wi-cat.ru
Platform
BrandModelRev
Argus Technologies EW-2101
FCC ID
Type
access point
Wireless class
B11
CPU1
Samsung S3C4510B
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Chip
AMIC A43L0616V-6 x 2
ETH chip1
Samsung S3C4510B
ETH chip2
Realtek Model?
ETH chip3
Realtek RTL8019AS
Ethernet Port Count
1-WAN
1-10MbE-LAN

802dot11 OUI: none specified

Expansion IF types
PCMCIA (16-bit)
PCMCIA slots
1
Power
5 VDC, 2 A
Connector type
barrel

Additional chips
UART with FIFO buffer;EPIC;Ei16C550;EPIC, Ei16C550-CJ44, 0034;1;CMOS;44-pin PLCC;
CPLD;Altera;EPM3032A;ALTERA, EPM3032ALC44-10, T BAD490049A;1;;44-pin PLCC;

Other
Default IP address
192.168.2.1
Default login user
admin
Default login password
Leave blank
Default SSID
Wireless
Manuf/OEM/ODM
Argus Technologies
Retail
FCC approval date 20 August 2001
Radio 1
Radio1 module
unknown
Radio1 module IF
PCMCIA (16-bit)
Chip1
Harris HFA3841
Chip2
Intersil HFA3861B
Chip3
Intersil HFA3683A
Wireless interface OUI
none specified
Antenna Connector Type
MMCX
Wireless Standard
IEEE 802.11b
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.

Overview[edit]

"JOE.H", "AGS:200103 Ver. 0B", and "Broadband Router+LAN Wireless" appears to be silkscreened on the board in the FCC photos.

Noted covered models in the FCC test report are as follows...

  • WR-2201
  • EW-2100
  • EW-2101
  • WA-601
  • WA-2201 (appears to be the JAHT WA-2201 / WA2201)

The default SSID for this device is presumed to be Wireless. It is the SSID shown in the manual.

The power adapter specified as used in the FCC docs is a Touch SP9715-A (100-240VAC ~ 50-60Hz, 0.6A -> 5VDC, 2.0A).

Links of Interest[edit]

Flashing[edit]

Upgrading[edit]

Reverting[edit]

JTAG-Serial Info[edit]

USB Info[edit]

vlan Info[edit]

Pictures[edit]

Notes[edit]

Hardware Modification[edit]

See also[edit]