Amped Wireless AP300

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
High Power Wireless-300N Smart Access Point
Amped Wireless AP300.jpg
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Amped Wireless AP300
FCC ID
Type
access point
CPU1
CPU1 Type
Lexra RLX4181
CPU1 Speed
390 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Zentel Model?
ETH chip1
Switch
Ethernet Port Count
5-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: F8:78:8C (1 E, 2 W)
Ethernet OUI: F8:78:8C (1 E, 2 W)

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Other

Default SSID: Amped_AP
Default IP address: 192.168.1.240
the IP 192.168.1.240 is used by 21 additional devices
of which 11 are Amped Wireless devices

Manuf/OEM/ODM
Retail
FCC approval date 18 April 2012
UPC 850214003126
(UPC DB, On eBay)
ASIN B0058X0TFA Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Chip1
Realtek Model?
Wireless interface OUI
F8:78:8C
Antenna Connector Type
RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Amped Wireless device with specifications, see Amped Wireless.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

The device is presumed to use RTL8196C. It probably also uses RTL8192CE. "LPC0014 REV:2.2" is silkscreened on the board.

The default WPA key is wireless.

OUI appears to be F8:78:8C (should probably be F8:7B:8C, and may be in some instances)

no FCC ID on a device label with this OUI...

Links of Interest

Datasheet
User's guide