Adtran Bluesocket BSAP-1925

From TechInfoDepot
Jump to navigationJump to search
abgn (N300)
Indoor Wireless Access Point
1700955F1.jpg
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Adtran Bluesocket BSAP-1925
Model Part Number
1700955F1
FCC ID
IC ID
Board ID
7016A0507001
Type
access point
CPU1
CPU1 Type
MIPS 74Kc
CPU1 Speed
560 MHz 32-bit
Flash1 Chip
Spansion FL256SAIFRO
Flash1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Nanya NT5TU32M16DG-AC x 2
ETH chip1
ETH chip2
Atheros AR8035-A
Ethernet Port Count
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: 00:19:92 (4 E, 4 W)
Ethernet OUI: 00:19:92 (4 E, 4 W)

Stock bootloader
U-Boot 1.1.4 DB120
Stock FW OS
Linux 2.6.35
Expansion IF types
none specified
PoE
802.3af, standard
Power
12 VDC, 1.25 A
Connector type
barrel
Serial Port (UART)
yes, internal, 4-pin header, 3.3V TTL
Other

Default IP address: 192.168.190.1
the IP 192.168.190.1 is used by 4 additional devices
of which 4 are Adtran devices
Default login user: adm1n
Default login password: blue1socket
adm1n:blue1socket credentials used by 5 additional devices
of which 5 are Adtran devices

Manuf/OEM/ODM
Senao CAP4201AG
Retail
FCC approval date 02 April 2013
ASIN B00B1SL1R6 Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Chip1
Wireless interface OUI
00:19:92
Antenna Connector Type
U.FL, RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
Radio 2
Chip1
Atheros AR9382
Wireless interface OUI
00:19:92
Antenna Connector Type
U.FL, RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Adtran device with specifications, see Adtran.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"7016A0507001 Ver: 1.00" is silkscreened on the board in the FCC photos.

This is the same text found on the WatchGuard AP100 (Senao CAP2100AG) and the Senao CAP4200AG.
A label affixed to the BSAP-1920 model (integral antennas) in the FCC external photos identifies the device as a CAP4200AG.
The BSAP-192x series are the same hardware, BSAP-1925 antennae are external and detachable RP-SMA, while the BSAP-1920 are internal.

The default credentials in this entry are per the FCC QSG.

They are specified as being for SSH access.

The power adapter shown in the FCC external photos is a Powertron Electronics PA1015-2I/PA1015-2I 120125 (100-240VAC ~ 50-60Hz, 0.4A -> 12VDC, 1.25A, 15W max.).

JTAG-Serial Info

Serial

Boot log

stock boot messages
U-Boot 1.1.4 (Oct  3 2012 - 13:28:43)

U-boot DB120
DRAM:  
sri
Wasp 1.2
wasp_ddr_initial_config(249): (32bit) ddr2 init
wasp_ddr_initial_config(426): Wasp ddr init done
Tap value selected = 0xd [0x0 - 0x1a]
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 211k for U-Boot at: 87fc8000
Reserving 192k for malloc() at: 87f98000
Reserving 44 Bytes for Board Info at: 87f97fd4
Reserving 36 Bytes for Global Data at: 87f97fb0
Reserving 128k for boot params() at: 87f77fb0
Stack Pointer at: 87f77f98
Now running in RAM - U-Boot at: 87fc8000
Flash Manuf Id 0x1, DeviceId0 0x2, DeviceId1 0x19
flash size 32MB, sector count = 512
Flash: 32 MB
BOARD IS NOT CALIBRATED!!!
In:    serial
Out:   serial
Err:   serial
Setting 0xb8116290 to 0x58b02d0f
Net:   ag934x_enet_initialize...
loc=a0ff0000 for eth0, [ff] [ff] [ff]
No valid address in Flash. Using generated address
 wasp  reset mask:c03300 
WASP  ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:0d:fc:06:a9:16
athrs17_reg_init: complete
eth0 up
eth0
Adtran bootloader version 1.0.4
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erase Flash from 0x9f040000 to 0x9f04ffff in Bank # 1 
First 0x4 last 0x4 sector size 0x10000
����   4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
## Booting image at 9f300000 ...
   Image Name:   Linux Kernel Image
   Created:      2018-06-11  20:52:25 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1400641 Bytes =  1.3 MB
   Load Address: 80002000
   Entry Point:  800061f0
   Verifying Checksum at 0x81000040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 800061f0) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

Booting Atheros AR934x
 
Linux version 2.6.35 (root@jenkins19-hsv) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #1 Mon Jun 11 20:51:57 UTC 2018
flash_size passed from bootloader = 32
arg 1: console=ttyS0,115200
arg 2: root=31:06
arg 3: rw
arg 4: rootfstype=jffs2
arg 5: init=/sbin/init
arg 6: mem=128M
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 560 ddr 450 ahb 225
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=31:06 rw rootfstype=jffs2 init=/sbin/init mem=128M 
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 125868k/131072k available (2940k kernel code, 5204k reserved, 797k data, 196k init, 0k highmem)
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 279.55 BogoMIPS (lpj=559104)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI init:ath_pcibios_init
ath_pcibios_init(326): PCI CMD write: 0x356
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1001ffff 64bit] (PCI address [0x10000000-0x1001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
pdev_fixup_irq pin 0
Returning IRQ 64
pdev_fixup_irq dev->irq 64  slot 0 pin 1 dev 87c10400 
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ATH GPIOC major 0
Slow work thread pool: Starting up
Slow work thread pool: Ready
JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.
fuse init (API version 7.14)
msgmni has been set to 245
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
****ath_flash_init*****
Creating 13 MTD partitions on "ath-nor0":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000080000 : "u-boot-env"
0x000000050000-0x000000090000 : "Cert"
0x000000090000-0x000000200000 : "Kdump"
mtdoops: Attached to MTD device 3
0x000000200000-0x000000300000 : "/var"
0x000000300000-0x000000580000 : "Kernel A"
0x000000580000-0x000001000000 : "Rootfs A"
0x000001000000-0x000001280000 : "Kernel B"
0x000001280000-0x000001d00000 : "Rootfs B"
0x000001d00000-0x000001e00000 : "/home"
0x000001e00000-0x000001f80000 : "/log"
0x000001ff0000-0x000002000000 : "ART"
0x000001fe0000-0x000001ff0000 : "SENAO"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
ctnetlink v0.93: registering with nfnetlink.
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
arch/mips/atheros/gpio.c (ath_simple_config_init) JUMPSTART_GPIO: 16
ath_otp_init: Registering OTP success
ath_clksw_init: Registering Clock Switch Interface success
VFS: Mounted root (jffs2 filesystem) on device 31:6.
Freeing unused kernel memory: 196k freed

Boot Bank: A Count: 1
A: 3.2.0-HA-650478 B: 3.0.1-HB-646847

Serial: 1925xxxxxxxxxx
MAC: 00:19:92:xx:xx:xx

===========================
Access Point Console (1925)
===========================
User Access verification

/
Cores disabled.

Detected 5 stored panic files on flash.



AP login:

Boot log

OpenWrt boot messages WIP
U-Boot 1.1.4 (Oct  3 2012 - 13:28:43)

U-boot DB120
DRAM:  
sri
Wasp 1.2
wasp_ddr_initial_config(249): (32bit) ddr2 init
wasp_ddr_initial_config(426): Wasp ddr init done
Tap value selected = 0xc [0x0 - 0x19]
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 211k for U-Boot at: 87fc8000
Reserving 192k for malloc() at: 87f98000
Reserving 44 Bytes for Board Info at: 87f97fd4
Reserving 36 Bytes for Global Data at: 87f97fb0
Reserving 128k for boot params() at: 87f77fb0
Stack Pointer at: 87f77f98
Now running in RAM - U-Boot at: 87fc8000
Flash Manuf Id 0x1, DeviceId0 0x2, DeviceId1 0x19
flash size 32MB, sector count = 512
Flash: 32 MB
BOARD IS NOT CALIBRATED!!!
In:    serial
Out:   serial
Err:   serial
Setting 0xb8116290 to 0x58b02d0f
Net:   ag934x_enet_initialize...
loc=a0ff0000 for eth0, [ff] [ff] [ff]
No valid address in Flash. Using generated address
 wasp  reset mask:c03300 
WASP  ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:0d:fc:06:af:1a
athrs17_reg_init: complete
eth0 up
eth0
Adtran bootloader version 1.0.4
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erase Flash from 0x9f040000 to 0x9f04ffff in Bank # 1 
First 0x4 last 0x4 sector size 0x10000
   4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
## Booting image at 9f300000 ...
   Image Name:   MIPS OpenWrt Linux-4.19.72
   Created:      2019-09-17   1:37:36 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1797764 Bytes =  1.7 MB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum at 0x81000040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

[    0.000000] Linux version 4.19.72 (briang@sunny) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r11034-cf6ccef8f2)) #0 Tue Sep 17 01:37:36 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] MIPS: machine is Adtran Bluesocket BSAP-1925
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a8 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,115200 root=31:06 rw rootfstype=jffs2 init=/sbin/init mem=128M root= rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 122488K/131072K available (4272K kernel code, 172K rwdata, 1008K rodata, 1196K init, 207K bss, 8584K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 560.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[    0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[    0.008234] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.084812] pid_max: default: 32768 minimum: 301
[    0.089921] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.096918] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.109915] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.120331] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.126907] pinctrl core: initialized pinctrl subsystem
[    0.133397] NET: Registered protocol family 16
[    0.146546] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
[    0.153031]  MEM 0x0000000010000000..0x0000000013ffffff
[    0.158536]   IO 0x0000000000000000..0x0000000000000000
[    0.183667] PCI host bridge to bus 0000:00
[    0.188056] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.195304] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.201193] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.208351] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.218293] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[    0.226016] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[    0.237072] clocksource: Switched to clocksource MIPS
[    0.243567] NET: Registered protocol family 2
[    0.249071] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    0.257259] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.264614] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.271346] TCP: Hash tables configured (established 1024 bind 1024)
[    0.278180] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.284348] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.291391] NET: Registered protocol family 1
[    0.299283] Crashlog allocated RAM at address 0x3f00000
[    0.306223] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.320045] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.326190] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.349558] io scheduler noop registered
[    0.353696] io scheduler deadline registered (default)
[    0.361383] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.368476] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.375879] console [ttyS0] disabled
[    0.379737] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[    0.388853] console [ttyS0] enabled
[    0.388853] console [ttyS0] enabled
[    0.396401] bootconsole [early0] disabled
[    0.396401] bootconsole [early0] disabled
[    0.412165] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
[    0.417419] 11 fixed-partitions partitions found on MTD device spi0.0
[    0.424071] Creating 11 MTD partitions on "spi0.0":
[    0.429156] 0x000000000000-0x000000040000 : "u-boot"
[    0.435140] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.441580] 0x000000050000-0x000000090000 : "Cert"
[    0.447401] 0x000000090000-0x000000200000 : "Kdump"
[    0.453248] 0x000000200000-0x000000300000 : "/var"
[    0.459063] 0x000000300000-0x000001000000 : "firmware1"
[    0.470296] 2 uimage-fw partitions found on MTD device firmware1
[    0.476506] Creating 2 MTD partitions on "firmware1":
[    0.481787] 0x000000000000-0x0000001c0000 : "kernel"
[    0.487763] 0x0000001c0000-0x000000d00000 : "rootfs"
[    0.493643] mtd: device 7 (rootfs) set to be root filesystem
[    0.501135] 1 squashfs-split partitions found on MTD device rootfs
[    0.507597] 0x000000550000-0x000000d00000 : "rootfs_data"
[    0.514033] 0x000001000000-0x000001d00000 : "firmware2"
[    0.520377] 0x000001d00000-0x000001e00000 : "/home"
[    0.526235] 0x000001e00000-0x000001f80000 : "/log"
[    0.532058] 0x000001fe0000-0x000001ff0000 : "SENAO"
[    0.538001] 0x000001ff0000-0x000002000000 : "art"
[    0.544778] libphy: Fixed MDIO Bus: probed
[    0.908999] libphy: ag71xx_mdio: probed
[    1.007277] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd072, driver=Atheros 8035 ethernet]
[    1.018423] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[    1.027561] NET: Registered protocol family 10
[    1.037418] Segment Routing with IPv6
[    1.041333] NET: Registered protocol family 17
[    1.045990] 8021q: 802.1Q VLAN Support v1.8
[    1.061340] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    1.073976] Freeing unused kernel memory: 1196K
[    1.078701] This architecture does not have kernel memory protection.
[    1.085354] Run /sbin/init as init process
[    2.226134] init: Console is alive
[    2.229974] init: - watchdog -
[    2.477090] random: fast init done
[    3.520859] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.597901] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.615832] init: - preinit -
[    5.033785] random: jshn: uninitialized urandom read (4 bytes read)
[    5.273403] random: jshn: uninitialized urandom read (4 bytes read)
[    5.327921] random: jshn: uninitialized urandom read (4 bytes read)
[    5.579363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    8.898422] jffs2: notice: (487) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (0 unchecked, 3 orphan) and 14 of xref (3 dead, 0 orphan) found.
[    8.917691] mount_root: switching to jffs2 overlay
[    8.945881] overlayfs: upper fs does not support tmpfile.
[    8.962263] urandom-seed: Seeding with /etc/urandom.seed
[    9.192294] procd: - early -
[    9.195382] procd: - watchdog -
[    9.849780] procd: - watchdog -
[    9.853355] procd: - ubus -
[    9.933713] urandom_read: 5 callbacks suppressed
[    9.933721] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.947813] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.955996] procd: - init -
Please press Enter to activate this console.
[   10.854931] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.032161] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
[   11.040052] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
[   11.054687] urngd: v1.0.0 started.
[   11.108871] xt_time: kernel timezone is -0000
[   11.255733] PPP generic driver version 2.4.2
[   11.278146] NET: Registered protocol family 24
[   11.380769] random: crng init done
[   11.389537] ath: phy0: disabling 2GHz band
[   11.411196] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
[   11.418455] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[   11.510861] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=14
[   11.521362] kmodloader: done loading kernel modules from /etc/modules.d/*
[   26.047457] br-lan: port 1(eth0) entered blocking state
[   26.052864] br-lan: port 1(eth0) entered disabled state
[   26.058645] device eth0 entered promiscuous mode
[   26.095257] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   33.409209] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   33.431221] br-lan: port 2(wlan1) entered blocking state
[   33.436826] br-lan: port 2(wlan1) entered disabled state
[   33.442723] device wlan1 entered promiscuous mode
[   33.602813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.636967] br-lan: port 3(wlan0) entered blocking state
[   33.642524] br-lan: port 3(wlan0) entered disabled state
[   33.648399] device wlan0 entered promiscuous mode
[   33.653367] br-lan: port 3(wlan0) entered blocking state
[   33.658903] br-lan: port 3(wlan0) entered forwarding state
[   33.665091] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   34.438305] br-lan: port 3(wlan0) entered disabled state
[   39.369374] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   39.376291] br-lan: port 3(wlan0) entered blocking state
[   39.381843] br-lan: port 3(wlan0) entered forwarding state
[   40.309696] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   40.316494] br-lan: port 2(wlan1) entered blocking state
[   40.322044] br-lan: port 2(wlan1) entered forwarding state



BusyBox v1.31.0 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r11034-cf6ccef8f2
 -----------------------------------------------------
root@OpenWrt:/# cat /proc/cpuinfo 
system type             : Atheros AR9344 rev 2
machine                 : Adtran Bluesocket BSAP-1925
processor               : 0
cpu model               : MIPS 74Kc V4.12
BogoMIPS                : 278.93
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa                     : mips1 mips2 mips32r1 mips32r2
ASEs implemented        : mips16 dsp dsp2
Options implemented     : tlb 4kex 4k_cache prefetch mcheck ejtag llsc dc_aliases perf_cntr_intr_bit nan_legacy nan_2008 perf
shadow register sets    : 1
kscratch registers      : 0
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

root@OpenWrt:/# iwinfo
wlan0     ESSID: "OpenWrt"
          Access Point: 00:19:92:xx:xx:xx
          Mode: Master  Channel: 44 (5.220 GHz)
          Tx-Power: 15 dBm  Link Quality: unknown/70
          Signal: unknown  Noise: -95 dBm
          Bit Rate: unknown
          Encryption: none
          Type: nl80211  HW Mode(s): 802.11an
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

wlan1     ESSID: "OpenWrt"
          Access Point: 00:19:92:xx:xx:xx
          Mode: Master  Channel: 6 (2.437 GHz)
          Tx-Power: 21 dBm  Link Quality: unknown/70
          Signal: unknown  Noise: -91 dBm
          Bit Rate: unknown
          Encryption: none
          Type: nl80211  HW Mode(s): 802.11bgn
          Hardware: 168C:0030 168C:A120 [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy1