AboCom AP700C

From TechInfoDepot
Jump to navigationJump to search
b (B11)
11Mbps 802.11b Wireless Access Point
Downloads
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
AboCom AP700C
FCC ID
Type
access point
CPU1
Realtek RTL8181
CPU1 Type
Lexra LX5280
CPU1 Speed
not specified
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Realtek RTL8181
ETH chip2
Realtek RTL8201CP
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
5 VDC, ? A
Connector type
barrel

Additional chips
2.4GHz Power Amplifier IC;GATAX;;G W22, ????A, WP02;1;

Other

Default IP address: 192.168.100.252
the IP 192.168.100.252 is used by 4 additional devices
of which 1 are AboCom devices

Manuf/OEM/ODM
Retail
FCC approval date 17 August 2004
Country of manuf Taiwan
Radio 1
Chip1
Realtek RTL8181
Chip2
Philips SA2400A
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
Wireless Standard
IEEE 802.11b
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Philips chipsets with specifications, see Philips.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented AboCom device with specifications, see AboCom.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"M01-AP700-X20" is silkscreened on the board in the FCC photos.

The manual says the default SSID is 802.11bAP.

The power adapter shown in the FCC photos is a TECHNICS TESA2-0503000d (100-240VAC ~ 50/60Hz, 0.40A max. -> 5VDC, 3.0A).