ASUS WL-500gP v1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
Multi-Functional Wireless Router
Asus WL-500GP v2.0 a.jpg
Support
Wikipedia
InfoDepot Wiki
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Tomato any flavor
Gargoyle
Status Unknown
Platform
BrandModelRev
ASUS WL-500g Premium v1 (R1.14)
FCC ID
Type
wireless router
Series
WL-500gP
CPU1
Broadcom BCM4704
CPU1 Type
MIPS32
CPU1 Speed
264 MHz
Flash1 Chip
Spansion S29GL064A90TFI
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Parallel)
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
SK hynix HY5DU281622ETP-6 x 2
ETH chip1
Broadcom BCM4704
Switch
Broadcom BCM5325E
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3/3u

802dot11 OUI: 00:17:3F (11 E, 27 W)
Ethernet OUI: 00:17:3F (11 E, 27 W)

Stock bootloader
CFE
Stock FW OS
Linux
Expansion IF types
Mini PCI, USB 2.0
Mini PCI slots
1
USB ports
2
USB Hub Compatible
Untested
Power
5 VDC, 2.5 A
Connector type
barrel
Serial Port (UART)
yes

Additional chips
4-port USB Host Chip;VIA;VT6212L;VIA, VT6212L, G 0552CD, TAIWAN, 23B7005400;1;

Other

Default SSID: default (101 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1303 additional devices
of which 172 are ASUS devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1330 additional devices
of which 204 are ASUS devices

3rd Party Firmware Support
DD-WRT • (List)
, Oleg-ng (wl500g) • (List)
, OpenWrt • (List | Dev | DLs)
, Tomato • (List | DLs)
, TomatoUSB • (List | DLs)
Retail
Availability End of Life
FCC approval date 27 March 2006
ASIN B0018CZZG8 Flag of the United States.svg
multiple uses
Country of manuf China
Radio 1
Radio1 module
Radio1 module IF
Mini PCI
Chip1
Broadcom BCM4318E
Wireless interface OUI
00:17:3F
Antenna Connector Type
U.FL, RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
9
 FCC ID
ASUS WL-500gP v1/deMSQWL500GP
MSQWL120GV2A
 FCC ID
ASUS WL-120g v2AMSQWL120GV2A
ASUS WL-500gP v1/deMSQWL500GP
MSQWL120GV2A
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
ASUS WL-500gBroadcomBroadcomBroadcom
ASUS WL-500g DeluxeBroadcomBroadcomBroadcom
ASUS WL-500gP v1BroadcomBroadcom
ASUS WL-500gP v1/deBroadcomBroadcom
ASUS WL-500gP v2BroadcomBroadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented ASUS device with specifications, see ASUS.

54 Mbps - 2.4GHz 802.11g = G54 class


Overview

Default settings (including the SSID) are per ASUS's manual.

De

Links of Interest

Reviews

00:17:3F OUI on the label, presumed to be used for both interfaces

Forum threads

Hardware
BROADCOM BCM4704KPBG
BROADCOM BCM5325EKQMG
BROADCOM BCM4318EKFBG
SPANSION S29GL064M90TFIR7
SK hynix HY5DU281622ETP-5
VIA VT6212L
SIGE 2521A6

PCI ID
14e4:4704	BCM4704 PCI to SB Bridge
14e4:4705	BCM4704 802.11b Wireless LAN Controller
14e4:4706	BCM4704 Ethernet Controller
14e4:4707	BCM4704 USB Controller
14e4:4708	BCM4704 Crypto Accelerator
14e4:4318	BCM4318 802.11g Wireless LAN Controller
14e4:4319	BCM4318 802.11a/b/g PCI Express Transceiver

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = v23 SP3

It is extremely important to follow the guidelines for your specific router. Please see Installation for more information. Remember to read the Peacock Announcementfor important basic information on Broadcom Routers.

A major clean-up of the Asus Install section was needed (and done) in the fall of 2009 - see Asus WL500-- old descriptions for the old but working guides. Valuable information from the old guides should be generalised, summarised and added to the Install list below, in an manner that would keep the Initial Install page looking good.

All Asus WL-500xx series routers

  • For all Asus WL-500xx series routers there are a number of ways to do the initial flash.
  • The TFTP method using the two Asus specific clean-up files is the "works every time-almost" way.
  • Other methods like using the Asus Recovery tool (recommended). or even using the web-GUI (not recommended) have also been reported to work for some, for the initial dd-wrt flash. So your mileage may vary.
  • Pick the one that is easier and works for you - You have now been notified of the method that is guaranteed to work!
  • The firmware files for the Asus WL-500xx series initial flash and the main builds are found here: mini-asus.trx for the initial flashing. This is the 14929 build that is the Broadcom forum recommended build at this time. Read the peacock announcement http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486 to determine if this build is still the recommended build for broadcom devices, how to upgrade properly and how to test if you need to use VINT or can use NEWD builds for upgrading. (The router database links to VINT, but the router database is often wrong and should not be followed)
  • Here is a thread on recovery. See the linked thread in the second post as well: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=48003
Clock Timing Bug

This affects many of these models. Check if you are affected before applying the fix.

The TFTP recommended Asus way for all WL-500xx routers

NOTE: This method should only be used when you're not a windows user or do not have Administrative privileges in Vista or Windows 7 . The better method is using the provided Asus Firmware recovery Utility that came with the router. You may also obtain it from Asus' website See below this entry for instructions.

Asus Recovery Utility

You can get the utilities here, or you can browse the Asus site to download the latest version. Asus only seem to provide these for Windows.

  • Under Vista and Win7 this utility must be run as administrator.
  • In case you have multiple network interfaces and are unable to find you router, disable all but the one that is connected to your router.
  • You should also turn off your firewall, in order to allow the Asus Recovery Utility to be able to connect and send data from your PC to the Router.

Steps:

  1. Remove the power connector of the WL series router.
  2. While holding the reset button, plug the power connector back in. (WL500gP - button labeled "restore")
  3. When the power LED flashes, release the reset button. The router is now in recovery mode.
  4. You need to manually set the address of your Pc Network LAN card to 192.168.1.10 and subnet mask 255.255.255.0
  5. Use the Asus recovery utility to upload the DD-WRT mini-asus.trx file.
  6. After the upgrade the Utility will ask for a router reboot. Give it about a minute to be on the safe side before removing the power. Once plugged back in, you should be able to access the web interface.
  7. DO NOT use Firefox for upgrading builds! Use Internet Explorer!!!!
  8. Type 192.168.1.1 into your browser and set your username as root and pick a password.
  9. Navigate to Administration->Firmware Upgrade and upload either the recommended build provided on the main page of the site, or another of your choice.

IMPORTANT: If flashing with a WL500xx (not 520xx) Mega or Big build (Firmware image 5MB or larger) it will take ~ 3-5 minutes AFTER the timer has reached 0 for the firmware to complete. The best thing to do is hit Upgrade and walk away for 10 minutes so you don't inadvertently disturb the upgrade process.

Links

Asus WL-500g Premium v2 wiki
Oleg's WL-series comparison table


Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 10.03.1
Current supported version: 22.03.5

Please insert instructions here

Flashing Tomato

Please insert instructions here

Upgrading

Updating DD-WRT

If dd-wrt is already on the router follow these instructions. If stock firmware is on the router follow the flashing instructions.

  1. Check for recommended builds here first.
  2. Set your computer to a static IP of 192.168.1.7. (or to whatever subnet the router is on) Disable all firewalls and security. Disable wireless on your computer and only have the router connected to the flashing computer by the ethernet cable between the two.
  3. Hard reset or 30/30/30 (If the router supports it, if not, reset to defults in the GUI) prior to flashing. Wait. Check for password page on re-login and change password.
  4. Flash firmware. You can use the webgui except if you have a belkin router. (For belkin use tftp.exe to flash)
  5. Wait...at least three minutes. Lights should return to normal. See important2, below. Failing to wait is how most people brick their routers.
  6. Do a power cycle of the router. (Unplug the cord, count to 30 and plug it back in.)
  7. Wait for the lights to return to normal usually about 2 minutes.
  8. Hard reset or 30/30/30 again (If the router supports it, if not, reset to defults in the GUI). Wait. Check for the password page and re-login to change the password. Then you can reconfigure your settings manually.
  9. Once configured set your computer back to autoIP and autoDNS.

Important1: This Hard reset or 30/30/30 works fine for Asus router, but you do have to power cycle after the reset.

Important2: After you flash the firmware, and before you do the hard reset, the router will be building some nvram settings. YOU MUST WAIT FOR THIS TO FINISH PRIOR TO DOING ANYTHING WITH THE ROUTER INCLUDING A HARD RESET. Usually, you can tell when this process is completed by the WAN light coming on, but it does take several minutes. Go have a beer. There are starting to be more and more people who BRICK their routers by not waiting until the nvram is rebuilt, PRIOR to doing a hard reset. YOU NEED TO WAIT!

USB Info

DD-WRT USB

  • The USB port is where you can connect an external USB hard drive or flash drive. Which can do a multitude of things. You can use in as a NAS, storage for a FTP server, use Optware to run external programs like torrent software, samba for sharing files to network, share a USB printer with network... The list of possibilities is long, it just takes a little research.
  • ProFTPd, samba, dlna, raid support is included in most the newer builds of dd-wrt. Check the features chart to be sure.

Pictures

Retail Images
User Images
FCCID MSQWL500GP