ASUS RT-G32 rev C1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N150)
Wireless-N Router
Asus RT-N10+.jpg
Homepage
Support
Downloads
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
ASUS RT-G32 C1
FCC ID
Board ID
AP699E8N3
Type
wireless router
CPU1
Ralink RT3050F
CPU1 Type
MIPS 24KEc
CPU1 Speed
320 MHz
Flash1 Chip
Spansion S29GL032N90-TF104
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
EtronTech EM63A165TS-6G
ETH chip1
Ralink RT3050F
Switch
Ralink RT3050F
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 60:A4:4C (4 E, 8 W)
Ethernet OUI: 60:A4:4C (4 E, 8 W)

Stock bootloader
U-Boot 3.2 Ralink
Stock FW OS
Linux 2.6.21
Expansion IF types
none specified
Power
12 VDC, 0.5 A
Connector type
barrel
Serial Port (UART)
yes, internal, 4-pin header, populated, 3.3V TTL, (57600 8N1), J2
Other

Default SSID: ASUS (99 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1310 additional devices
of which 172 are ASUS devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 204 are ASUS devices

Manuf/OEM/ODM
SGE AP699E8N3 .7U31C
3rd Party Firmware Support
DD-WRT • (List)
, OpenWrt • (List | Dev | DLs)
, Wive-NG (sfstudio) • (Blog | List)
Retail
Availability End of Life
FCC approval date 08 June 2010
Country of manuf China
Radio 1
Chip1
Ralink RT3050F
Wireless interface OUI
60:A4:4C
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 FCC ID
ASUS RT-N10 rev C1MSQRTN10B
ASUS RT-N10+ rev B1MSQRTN10B
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
ASUS RT-G32 rev A1AtherosAtheros
ASUS RT-G32 rev B1RalinkRalink
ASUS RT-G32 rev C1RalinkRalink

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented ASUS device with specifications, see ASUS.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"AP699E8N3.7U31C-4 REV:1.0" is silkscreened on the board.

No tagline found, using genaric tagline. Previous rev. are bg while this one is bgn

Links of Interest

Reviews

Flashing

Flashing dd-wrt

DD-WRT support, use dd-wrt firmware for asus-rt-n10+.

Supported by dd-wrt as of = ?

Please insert instructions here

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 12.09
Current supported version: 18.06.9

Please insert instructions here


Flashing Wive-NG

Wive-NG support, native support fastpath NAT.

JTAG-Serial Info

Serial

Serial Pinouts

          J2
(RxD) (TxD) (GND) (3.3)

<--- To RT3050
---> To PWR


Boot log with Wive-NG firmware

boot log
U-Boot 1.1.3 (Mar 28 2011 - 20:31:59)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fb0000
config usb..*** Error: D+/D- is 1/1, config usb failed.
..*** Error: D+/D- is 1/1, config usb failed.

 Set info->start[0]=BF000000
flash_protect ON: from 0xBF000000 to 0xBF01E5B7
flash_protect ON: from 0xBF030000 to 0xBF030FFF
*** Warning - bad CRC, using default environment
============================================ 
Ralink UBoot Version: 3.4.0.0
-------------------------------------------- 
ASIC 3052_MP2 (Port5<->None)
DRAM component: 256 Mbits SDR
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: NOR Flash
Date:Mar 28 2011  Time:20:31:59
============================================ 
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384 

 ##### The CPU freq = 320 MHZ #### 

SDRAM bus set to 16 bit 
 SDRAM size =32 Mbytes

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial. 
   8: Load Boot Loader code to SDRAM via TFTP. 
   9: Load Boot Loader code then write to Flash via TFTP. 
 4  3  2  1  0 

3: System Boot system code via Flash.
## Booting image at bf050000 ...
   Image Name:   Wive_WR-150N
   Created:      2014-12-18   7:27:08 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3357226 Bytes =  3.2 MB
   Load Address: 80000000
   Entry Point:  8000c410
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8000c410) ...
## Giving linux memsize in MB, 32

Starting kernel ...

Linux version 2.6.21.62 (sfstudio_at_mail.ru@wive-ng.sf.net) 
(gcc version 4.8.4 20141030 (prerelease) (GCC)
#0 Thu Dec 18 13:21:25 OMST 2014

 The CPU feqenuce set to 320 MHz
LINUX started...
The CPU/SYS frequency set to 320/106 MHz
CPU revision is: 0001964c (MIPS 24K)
DetectRAMsequence
MAX memory:[67108864]
RAM size detected:[33554432]
FullviewRAM:[33554432]
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 ro
start_kernel(): bug: interrupts were enabled *very* early, fixing it
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Cache parity protection disabled
cause = 40808060, status = 11000000
PID hash table entries: 1024 (order: 0, 4096 bytes)
calculating r4koff... 0004e200(320000)
CPU frequency 320.00 MHz
Using 160.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29896k/32768k available 
(2017k kernel code, 2872k reserved, 379k data, 104k init, 0k highmem)
Mount-cache hash table entries: 512
softirq RT prio: 1.
NET: Registered protocol family 16
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 512 bind 1024)
TCP reno registered
NET: Registered protocol family 1
ralink flash device: 0x1000000 at 0x1f000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 
in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
Creating 7 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "Bootloader"
0x00030000-0x00040000 : "Config"
0x00040000-0x00050000 : "Factory"
0x00050000-0x0011fa6a : "Kernel_stub"
0x0011fa6a-0x003d0000 : "RootFS_stub"
0x003d0000-0x00400000 : "RW-FS"
0x00050000-0x003d0000 : "Kernel_RootFS"
Load Kernel WDG Timer Module
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
Ralink gpio driver initialized
Number of GPIO: 52, GPIO mode: 0000039D
Ralink APSoC Hardware Watchdog Timer
Serial: 8250/16550 driver $Revision: 1.6 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at MMIO 0xb0000c00 (irq = 12) is a 16550A
Ralink APSoC Ethernet Driver Initilization. v3.0  
256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, weight = 128, Tx Ring = 256, Rx Ring = 256
PROC INIT OK!
raeth: disable ESW ports before kernel init.
block2mtd: version $Revision: 1.1.1.1 $
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 8192 max)
TCP cubic registered
ip_tables: (C) 2000-2006 Netfilter Core Team, NET: 
Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
NVRAM: Kernel NVRAM start init.
NVRAM: Particion 0 CRC c62705a3 OK.
VFS: Mounted root (squashfs filesystem) readonly.
mount /proc file system ok!
mount /sys file system ok!
mount /dev file system ok!
mount /var file system ok!
Freeing unused kernel memory: 104k freed
Build the /dev/console node.
Algorithmics/MIPS FPU Emulator v1.5
INIT Touch mdev.
INIT Mount /tmp/rootfs
INIT Create some persistent nodes in dev.
INIT Init RW particion
INIT RW File system is ok - preparing...
INIT Umount /tmp/rootfs
INIT Start init now.
~ # PRECONFIG Preconfigure...
PRECONFIG Delete old configs.
PRECONFIG Create some folders in var and etc.
PRECONFIG Copy web pages to tmpfs.
SYSLOG Start klogd
SYSLOG Start syslogd local
Password for 'Admin' changed
Restore time to build time or save time.
Thu Dec 18 13:27:00 OMST 2014
Raeth v3.0 (NAPI)

phy_tx_ring = 0x0074d000, tx_ring = 0xa074d000

phy_rx_ring0 = 0x0074e000, rx_ring0 = 0xa074e000
GMAC1_MAC_ADRH -- : 0x0000001e
GMAC1_MAC_ADRL -- : 0xe3ef9d30
CDMA_CSG_CFG = 81000007
GDMA1_FWD_CFG = 710000
switch reg write offset=e4, value=3f
eth2.1: Setting MAC address to  
eth2.2: Setting MAC address to 
webs: Listening for HTTP requests at address 192.168.1.1
rm -f /etc/portforward
rm -f /etc/macipfilter
rm -f /etc/websfilter
Content filter disabled.
internet.sh
Build config for fist WiFi module.
0x1300 = 00064380
0x1300 = 00064380
>>>>> RECONFIGURE WIFI IF = ra0 <<<<<<<<<<
>>>>> RECONFIGURE WIFI IF = ra0 <<<<<<<<<<
hw_nat: module license 'Proprietary' taints kernel.
Ralink HW NAT v2.51.1 Module Enabled, ASIC: RT3350, 
REV: 0102, FoE Size: 4096
done
pppoe_pass: Disabled.
ipv6_pass: Disabled
[ ! -f /etc/backup/nvram_backup.dat ] && 
(sleep 20 && fs backup_nvram && fs save) &

Pictures

Retail Images
User Images
FCCID MSQRTN10B

See also