ASUS DSL-N16

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
300Mbps Wi-Fi VDSL/ADSL Modem Router
Homepage
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Not Supported
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
ASUS DSL-N16 A1
Serial number prefix
90IG0020-BM3000
FCC ID
none specified
Type
wireless router, dsl modem
CPU1
MediaTek MT7510
CPU1 Type
MIPS 34Kc
CPU1 Speed
not specified
Flash1 Chip
GigaDevice GD25Q128
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
ESMT M14D5121632A
ETH chip1
MediaTek MT7510
Switch
MediaTek MT7510
Ethernet Port Count
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
12 VDC, 2 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header
Flags:
VDSL2, ADSL2+

Additional chips
VDSL2/ADSL2 Line Driver (LD);MediaTek;MT7555;;1;

Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1311 additional devices
of which 172 are ASUS devices

Retail
(Est.) release date 13 September 2015
EAN 4712900080612
(UPC DB, On eBay)
ASIN B01LXYBLJS Flag of the United Kingdom (1-2).svg
Country of manuf China
Physical
Dimensions
190 mm x 35 mm x 235 mm
Weight
225 g
Radio 1
Chip1
MediaTek MT7592
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
ASUS DSL-N16MediaTekMediaTek
ASUS DSL-N16UMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented ASUS device with specifications, see ASUS.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Model Part Num: 90IG0020-BM3000

  • Ethernet WAN allows to use as an DSL modem router or stand-alone wireless router
  • Compatible with VDSL2, ADSL2/2+, fiber and cable services for complete future-proofing
  • Fast Ethernet ports for the reliable internet performance
  • Four independent SSIDs for flexible and secure Wi-Fi network configuration
  • PPTP VPN server and PPTP/L2TP VPN client support
  • VDSL/ADSL WAN multi service for IPTV support

Additional specifications

per ASUS's product page

  • Memory: Flash: 16MB, RAM: 64MB (DDR2)
  • Antenna: 2x external 2dBi antenna
  • Ports: xDSL: 1x ADSL2+ (RJ11)
LAN: 4x FE (RJ45) 10/100 BaseT
  • Power Adapter:
AC Input : 100~240V (50~60HZ)
DC Output : 12V / 0.5A
  • Dimensions (W x H x D): 190 mm x 35 mm x 235 mm
  • Weight: 225 g

Links of Interest

Forum threads

Spec. aggregators

JTAG-Serial Info

Serial

Boot log
DRAMC V2.2.0.2 (0)

MT751020 at Thu Mar 31 12:04:09 CST 2016 free bootbase
Memory size 64MB
flash base: bc000000
Found SPI Flash 16MiB GD25Q128 at 0xbc000000
Bootloader version: 3.1

Search PHY addr and found PHY addr=8
Not found TC Phy
Press reset button to boot command mode.                                        
Press any key in 3 secs to enter boot command mode.                             
................................... 

Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
75xx: 0x0 
Uncompressing [LZMA] ...  done.
Linux version 2.6.36 (root@localhost) (gcc version 4.3.4 (GCC) ) #1 SMP Tue Nov8
ISPRAM0: PA=00310000,Size=00008000,enabled
DSPRAM0: PA=1dff8000,Size=00001000,enabled
flash_init: flash_base:bc000000
flash_init: flash_base:bc000000
memsize:64MB
Ralink MT751020 SOC prom init
bootconsole [early0] enabled
CPU revision is: 00019555 (MIPS 34Kc)
Determined physical RAM map:
 memory: 03fe0000 @ 00020000 (usable)
Wasting 1024 bytes for tracking 32 unused pages
Zone PFN ranges:
  Normal   0x00000020 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000020 -> 0x00004000
3 available secondary CPU TC(s)
PERCPU: Embedded 7 pages/cpu @81083000 s7264 r8192 d13216 u65536
pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16224
Kernel command line:  es=1
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=0006498c
Readback ErrCtl register=0006498c
nmi base is 810c4200
Memory: 60660k/65408k available (3160k kernel code, 4748k reserved, 645k data, )
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1          
Hierarchical RCU implementation.                                                
        RCU-based detection of stalled CPUs is disabled.                        
        Verbose stalled-CPUs detection is disabled.                             
NR_IRQS:64                                                                      
CPU frequency 648.00 MHz                                                        
 Using 266.667 MHz high precision timer.                                        
console [ttyS0] enabled, bootconsole disabled                                   
console [ttyS0] enabled, bootconsole disabled                                   
Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)                         
pid_max: default: 32768 minimum: 301                                            
Mount-cache hash table entries: 512                                             
34K sync es set to 1.                                                           
Config7: 0x80080500                                                             
Limit of 4 TCs set                                                              
TLB of 64 entry pairs shared by 2 VPEs                                          
VPE 0: TC 0 1 2, VPE 1: TC 3                                                    
IPI buffer pool of 16 buffers                                                   
CPU revision is: 00019555 ((null))                                              
TC 1 going on-line as CPU 1                                                     
CPU revision is: 00019555 ((null))                                              
TC 2 going on-line as CPU 2                                                     
CPU revision is: 00019555 ((null))                                              
TC 3 going on-line as CPU 3                                                     
Brought up 4 CPUs                                                               
NET: Registered protocol family 16                                              
MT7510_pcie_init                                                                
check pcie link up status:                                                      
isRC0_LINKUP=0                                                                  
isRC1_LINKUP=1                                                                  
registering PCI controller with io_map_base unset                               
bio: create slab <bio-0> at 0                                                   
pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x200fffff]                   
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]                   
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x200]
pci 0000:00:01.0: PCI bridge to [bus 01-01]                                     
pci 0000:00:01.0:   bridge window [io  disabled]                                
pci 0000:00:01.0:   bridge window [mem 0x20000000-0x200fffff]                   
pci 0000:00:01.0:   bridge window [mem pref disabled]                           
PCI: Enabling device 0000:00:01.0 (0000 -> 0002)                                
NET: Registered protocol family 8                                               
NET: Registered protocol family 20                                              
Switching to clocksource MIPS                                                   
NET: Registered protocol family 2                                               
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)                  
TCP established hash table entries: 2048 (order: 2, 16384 bytes)                
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)                       
TCP: Hash tables configured (established 2048 bind 2048)                        
TCP reno registered                                                             
UDP hash table entries: 128 (order: 0, 4096 bytes)                              
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)                         
NET: Registered protocol family 1                                               
TC3162 hardware watchdog module loaded.                                         
squashfs: version 4.0 (2009/01/31) Phillip Lougher                              
JFFS2 version 2.2 (NAND) (ZLIB) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.    
msgmni has been set to 118                                                      
io scheduler noop registered (default)                                          
ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162                                   
brd: module loaded                                                              
tc3162 mtd init: mt6573_nand_init enter                                         
MediaTek MT6573 Nand driver init, version v2.0                                  
tc3162: flash device 0x01000000 at 0x1c000000                                   
tc3162: Found SPIFLASH 16MiB GD25Q128                                           
Creating 7 MTD partitions on "tc3162":                                          
0x000000000000-0x000000010000 : "bootloader"                                    
0x000000010000-0x000000020000 : "romfile"                                       
0x000000020000-0x00000016de44 : "kernel"                                        
mtd: partition "kernel" doesn't end on an erase block -- force read-only        
0x00000016de44-0x0000008ede44 : "rootfs"                                        
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-y
0x000000020000-0x000000ec0000 : "tclinux"                                       
0x000000ec0000-0x000000fc0000 : "jffs2"                                         
0x000000fc0000-0x000001000000 : "reservearea"                                   
PPP generic driver version 2.4.2                                                
PPP Deflate Compression module registered                                       
PPP BSD Compression module registered                                           
PPP MPPE Compression module registered                                          
NET: Registered protocol family 24                                              
PPTP driver version 0.8.5                                                       
RT3xxx EHCI/OHCI init.                                                          
u32 classifier                                                                  
    Actions configured                                                          
Netfilter messages via NETLINK v0.30.                                           
nf_conntrack version 0.5.0 (947 buckets, 3788 max)                              
ctnetlink v0.93: registering with nfnetlink.                                    
xt_time: kernel timezone is -0000                                               
GRE over IPv4 demultiplexor driver                                              
GRE over IPv4 tunneling driver                                                  
ip_tables: (C) 2000-2006 Netfilter Core Team                                    
TCP cubic registered                                                            
Initializing XFRM netlink socket                                                
NET: Registered protocol family 10                                              
IPv6 over IPv4 tunneling driver                                                 
NET: Registered protocol family 17                                              
NET: Registered protocol family 15                                              
L2TP core driver, V2.0                                                          
PPPoL2TP kernel driver, V2.0                                                    
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>                   
All bugs added by David S. Miller <davem@redhat.com>                            
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.                
Freeing unused kernel memory: 212k freed                                        
busybox init and set aff                                                        
init started:  BusyBox v1.00 (2018.11.12-18:24+0000) multi-call binary          
Sat Jan  1 00:00:00 UTC 2011                                                    
chmod: /userfs/profile.cfg: Read-only file system                               
module_sel: module license 'unspecified' taints kernel.                         
Disabling lock debugging due to kernel taint                                    
                                                                                
tcsmux version: tcsmux V1.1.0.0 (Nov 13 2018-02:22:21).                         
                                                                                
tcportbind version: tcportbind V1.1.0.0 (Feb  5 2014-17:25:04).                 
vlantag_drv_init                                                                
TCSUPPORT_IPV6                                                                  
TC3162 LED Manager 0.1 init                                                     
                                                                                
tcledctrl version: tcledctrl V1.1.0.0 (Nov 13 2018-02:22:13).                   
tccicmd V1.1.0.0 (Nov 13 2018-02:22:18)                                         
the number of cfg node is 76                                                    
register a node 0                                                               
register a node 1                                                               
regislogAccess_init ter a nodeLanguageSwitch_init  2                            
rvendorCfgFile_init egister a node 3rpstorm_init                                
                                                                                
reThe number of cache node is 5                                                              
[do_parse_romfile, 27]Start                                                     
[tc_parse_romfile, 245]Start                                                    
[tc_parse_romfile, 257]opername(/dev/mtdblock1)                                 
[tc_parse_romfile, 260]check rom file(/dev/mtdblock1)                           
[check_romfile, 108]pathname(/dev/mtdblock1)                                    
[check_romfile, 117]load XML file.                                              
mxml: Bad control character 0x1f not allowed by XML standard!                   
[check_romfile, 174]2nd load XML file.                                          
[check_romfile, 204]verify rom file.                                            
[check_romfile, 217]return tree                                                 
Check romfile pass!                                                             
[tc_parse_romfile, 382]rechecknum(0)                                            
[tc_parse_romfile, 389]laod backup romfile                                      
[loadRomfile, 77](1)                                                            
[loadRomfile, 114]BK_ROMFILE_FLAG                                               
mtd[readflash]:device=reservearea tclen=65536 tcoffset=0                        
Unlocking reservearea ...                                                       
Reading from reservearea to /tmp/tc_backupromfile ...                           
[BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 65536 0 reserva
[tc_parse_romfile, 396]check backup romfile                                     
[check_romfile, 108]pathname(/tmp/tc_backupromfile)                             
[check_romfile, 117]load XML file.                                              
mxml: Bad control character 0x1f not allowed by XML standard!                   
[check_romfile, 174]2nd load XML file.                                          
[check_romfile, 204]verify rom file.                                            
[check_romfile, 217]return tree                                                 
[tc_parse_romfile, 416]backup romfile is already exist.                         
Dualwan set wan_primary=8                                                       
Dualwan set wan_secondary=-1                                                    
killall: wpa_supplicant: no process killed                                      
                                                                                
 goto wlan_write!!killall: wpa_supplic                                          
wlan_write---goto fopen!!ant: nWPSActiveStatus = NULL                           
o WPSOOBActive = NULL                                                           
prReCounterActive = NULL                                                        
ocWPSGenPinCode = NULL                                                          
ess killed                                                                      
write_wlan_AutoChannelSkipList -(0x20)                                          
write_wlan_profile() freq=0: Can not get the attribute wl0_HT_BADecline correct.
write_wlan_profile() freq=0: Can not get the attribugenerate miniupnpd.conf     
te wl0_HT_STBC correctly so use the default value 1.                            
write_wlan_profile() freq=0: Can not get the attribute wl0_location_code correc.
_gen_upnp_conf                                                                  
                                                                                
==>syslog_write error, get WriteFlashInterval value failed                      
                                                                                
==>syslog_write error, get UpdateInterval value failed                          
                                                                                
==>syslog_write error, get AllLogSave value failed                              
[cfgmgr](SIGCHLD:P207)..                                                        
insmod raeth driver                                                             
femac.c:v1.00-NAPI 29.Mar.2011                                                  
eth0: FE MAC Ethernet address: 60:xx:xx:xx:xx:xx                                
ifconfig: ra0: error fetching interface information: Device not found           
                                                                                
7510_debug: dmt_base_addr : bf900000                                            
ADSL DMT initialization starting                                                
Begin AdslTaskInit.....                                                         
End AdslTaskInit                                                                
Begin to  request IRQ 20                                                        
DMT:Succeed to request IRQ 20                                                   
Initializing ADSL F/W 5.5.2.10 ......                                           
Initializing ADSL F/W ........ done                                             
ra0       no private ioctls.                                                    
                                                                                
TCSUPPORT_WLAN                                                                  
ra0       No such device                                                        
                                                                                
[main, 767]Init for web interface cfg node                                      
                                                                                
lanHost_read: Create node LanHost !                                             
TCSUPPORT_WLAN_MT7592                                                           
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)                                
                                                                                
                                                                                
=== pAd = c1082000, size = 746648 ===                                           
                                                                                
<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x                            
<-- RTMPAllocAdapterBlock, Status=0                                             
device_id =0x7603                                                               
RtmpChipOpsHook(507): Not support for HIF_MT yet!                               
mt7603_init()-->                                                                
mt_bcn_buf_init(224): Not support for HIF_MT yet!                               
<--mt7603_init()                                                                
Cannot find device "br0"                                                        
Mirror/redirect action on                                                       
killall: tcapi: no process killed                                               
cfg_manager start to init server socket                                         
SIOCGIFFLAGS: No such device                                                    
Ebtables v2.0 registered                                                        
killall: ntpclient: no process killed                                           
setup_receive:: bind...                                                         
pool.ntp.org: Unknown host                                                      
eth0: starting interface.                                                       
EPhy debug(8): tcPhyVerLookUp() in                                              
MT7510FE, EPhy debug(8)(15): tcPhyVerLookUp() out                               
PhyPart debug: tcPhyInit() in , tcphyver=15, phyaddr=8, eco=0x0                 
phyaddr = 8                                                                     
PhyPart debug: tcPhyInit() out , r31=0xb000                                     
EPhy debug(12): tcPhyVerLookUp() in                                             
MT7510Ge,Internal check flag: fgMT7510Ge_INT=0x0, eco=0x50003                   
EPhy debug(12)(16): tcPhyVerLookUp() out                                        
PhyPart debug: tcPhyInit() in , tcphyver=16, phyaddr=12, eco=0x0                
                                                                                
 7510Ge, phyaddr= (12,12)                                                       
debug... ,phyaddr=12 ,eco=0x50003                                               
PhyPart debug: tcPhyInit() out , r31=0xb000                                     
Ralink HW NAT Module Enabled                                                    
IP check use Black List                                                         
device eth0 entered promiscuous mode                                            
TCSUPPORT_WLAN: ifconfig                                                        
TCSUPPORT_WLAN_PERSSID_SWITCH disabled!                                         
(2)Going to bring up WiFi interfaces!!                                          
TCSUPPORT_WLAN_WDS                                                              
SSH                                                                             
TC3162 hardware watchdog initialized                                            
Ethernet Media-Type Support                                                     
monitorcfgmgr                                                                   
Copyright (C) 2013 ASUS Corp. Renjie_Lee@asus.com                               
                                                                                
Jan  1 00:00:13 monitorcfgmgr[377]: [start monitorcfgmgr]                       
                                                                                
four ports                                                                      
SIOCGIFFLAGS: No such device                                                    
interface elan.1 does not exist!                                                
ERROR: trying to remove VLAN -:elan.1:- error: No such device                   
SIOCGIFFLAGS: No such device                                                    
interface elan.2 does not exist!                                                
ERROR: trying to remove VLAN -:elan.2:- error: No such device                   
SIOCGIFFLAGS: No such device                                                    
interface elan.3 does not exist!                                                
ERROR: trying to remove VLAN -:elan.3:- error: No such device                   
SIOCGIFFLAGS: No such device                                                    
interface elan.4 does not exist!                                                
ERROR: trying to remove VLAN -:elan.4:- error: No such device                   
SIOCGIFFLAGS: No such device                                                    
interface elan.5 does not exist!                                                
ERROR: trying to remove VLAN -:elan.5:- error: No such device                   
SIOCGIFFLAGS: No such device                                                    
interface elan.6 does not exist!                                                
ERROR: trying to remove VLAN -:elan.6:- error: No such device                   
device eth0 is already a member of a bridge; can't enslave it to bridge br0.    
ethphxcmd used greatest stack depth: 13688 bytes left                           
Added VLAN with VID == 1 to IF -:eth0:-                                         
WARNING:  VLAN 1 does not work with many switches,                              
consider another number if you have problems.                                   
device elan.1 entered promiscuous mode                                          
Added VLAN with VID == 2 to IF -:eth0:-                                         
device elan.2 entered promiscuous mode                                          
Added VLAN with VID == 3 to IF -:eth0:-                                         
ip used greatest stack depth: 13656 bytes left                                  
device elan.3 entered promiscuous mode                                          
Added VLAN with VID == 4 to IF -:eth0:-                                         
device elan.4 entered promiscuous mode                                          
br0: port 1(eth0) entering disabled state                                       
* Phyaddr=8 RegAddr=00 value=8000                                               
* Phyaddr=9 RegAddr=00 value=8000                                               
* Phyaddr=10 RegAddr=00 value=8000                                              
* Phyaddr=11 RegAddr=00 value=8000                                              
[ used greatest stack depth: 13632 bytes left                                   
TSARM: MT7510 ATM SAR driver 1.0 init                                           
atmInit                                                                         
ATM SAR Time Base: 7065                                                         
atmInit 1.1 Version                                                             
ATM SAR Reset                                                                   
==============================================                                  
atm_init_wrappter                                                               
atm_init_wrappter                                                               
br2684_init                                                                     
                                                                                
 Mac = 60:xx:xx:xx:xx:xxpppoatm_init                                            
==============================================                                  
ATM SAR RX NAPI Mode                                                            
 mt7510_netdev_start                                                            
atm_dev: MT7510 ATM Ethernet address: 60:45:CB:16:4D:D8                         
 mt7510_atm_init: register_netdev success                                       
mt7510_atm_init: open genenral device                                           
mt7510_netdev_open                                                              
atm_dev: starting interface.                                                    
general device status: 3                                                        
atm_msg_buffer_init                                                             
txMsgNum: 720                                                                   
rxMsgNum: 512                                                                   
register autopvc cmd to sys                                                     
Channel:0, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:1, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:2, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:3, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:4, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:5, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:6, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
Channel:7, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0               
gzip used greatest stack depth: 13528 bytes left                                
[write_cur_romfile_in_flash, 456]write running romfile.                         
Unlocking romfile ...                                                           
Writing from /tmp/var/romfile.cfg.gz to romfile ...                             
 [w]                                                                            
[write_cur_romfile_in_flash, 464]write backup romfile in flash.                 
[write_backup_romfile]/userfs/bin/mtd writeflash /tmp/var/romfile.cfg.gz 65536 a
mtd[writeflash]:device=reservearea tclen=65536 tcoffset=0 tcfilelen =65536      
Unlocking reservearea ...                                                       
Writing from /tmp/var/romfile.cfg.gz to reservearea ...                         
enter real action -----tclen:0x10000,tcoffset:0x0                               
writeflash: write 0 'st sector,start from 0x0,0x10000 bytes                     
writeflash: total write 0x10000 bytes                                           
                                                                                
TCAPI save ok.                                                                  
Jan  1 00:00:18 crond[595]: crond 2.3.2 dillon, started, log level 8            
                                                                                
The test lab:255                                                                
log cicmd 0 (wan  vdsl2  set  sra  on  )                                        
 US bitswap on,DS bitswap on                                                    
log cicmd 1 (wan  vdsl2  set  bs_tx  on  )                                      
 log cicmd 2 (wan  vdsl2  set  bs  on  )                                        
 G.VECTOR on                                                                    
gvt_ns_flag off                                                                 
Set SNRM OFFSET = 5.0 db                                                        
Set Agc Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535                           
log cicmd 3 (wan  vdsl2  set  target_snrm  32767  )                             
 PROFILE17A_MULTI_MODE                                                          
log cicmd 4 (wan  vdsl  set  agc  65535  65535  65535  65535  )                 
 log cicmd 5 (wan  vdsl  set  upbo  255  )                                      
 log cicmd 6 (wan  vdsl  set  sync_sym  10  )                                   
 G.inp mode                                                                     
ANNEXA                                                                          
annex auto-switch flag = 0                                                      
DLA: start                                                                      
br0: port 5(elan.4) entering forwarding state                                   
br0: port 5(elan.4) entering forwarding state                                   
br0: port 4(elan.3) entering forwarding state                                   
br0: port 4(elan.3) entering forwarding state                                   
br0: port 3(elan.2) entering forwarding state                                   
br0: port 3(elan.2) entering forwarding state                                   
br0: port 2(elan.1) entering forwarding state                                   
br0: port 2(elan.1) entering forwarding state                                   
Ralink HW NAT Module Disabled                                                   
Ralink HW NAT Module Enabled                                                    
IP check use Black List                                                         
done                                                                            
device br1 already exists; can't create bridge with the same name               
check_and_set_iptv_ifname: a9fef1b1(169.254.241.177)                            
_ifconfig: name=br2 flags=1043 IFUP addr=169.254.241.177 netmask=255.255.0.0    
check_and_set_iptv_ifname: a9fe828b(169.254.130.139)                            
_ifconfig: name=br3 flags=1043 IFUP addr=169.254.130.139 netmask=255.255.0.0    
check_and_set_iptv_ifname: a9fe88eb(169.254.136.235)                            
_ifconfig: name=br4 flags=1043 IFUP addr=169.254.136.235 netmask=255.255.0.0    
upd========================insmod iptable_filter=======================         
ate_wan_state(wan0_, 5, 0)                                                      
update_wan_state(wan1_, 5, 0)                                                   
update_wan_state(wan2_, 5, 0)                                                   
update_wan_state(wan3_, 5, 0)                                                   
update_wan_state(wan4_, 5, 0)                                                   
update_wan_state(wan5_, 5, 0)                                                   
update_wan_state(wan6_, 5, 0)                                                   
update_wan_state(wan7_, 5, 0)                                                   
update_wan_state(wan8_, 0, 0)                                                   
update_wan_state(wan9_, 5, 0)                                                   
update_wan_state(wan10_, 5, 0)                                                  
update_wan_state(wan11_, 5, 0)                                                  
update_wan_state(wan12_, 5, 0)                                                  
========================insmod ipt_REJECT=======================                
/etc/isp0.conf                                                                  
/etc/isp1.conf                                                                  
/etc/isp2.conf                                                                  
/etc/isp3.conf                                                                  
/etc/isp4.conf                                                                  
/etc/isp5.conf                                                                  
/etc/isp6.conf                                                                  
/etc/isp7.conf                                                                  
SIOCGIFFLAGS: No such device                                                    
/etc/isp8_0.conf                                                                
                                                                                
==>Error, socket or ioctl error for mulifctl                                    
SIOCGIFFLAGS: No such device                                                    
SIOCSIFHWADDR: No such device                                                   
SIOCSIFADDR: No such device                                                     
Plugin libpppoe.so loaded.                                                      
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5                        
pppd: unrecognipppd used greatest stack depth: 13392 bytes left                 
zed option 'nas8_0'                                                             
pppd version 2.4.5                                                              
Usage: pppd [ options ], where options are:                                     
        <device>        Communicate over the named device                       
        <speed>         Set the baud rate to <speed>                            
        <loc>:<rem>     Set the local and/or remote interface IP                
                        addresses.  Either one may be omitted.                  
        asyncmap <n>    Set the desired async map to hex <n>                    
        auth            Require authentication from peer                        
        connect <p>     Invoke shell command <p> to set up the serial line      
        crtscts         Use hardware RTS/CTS flow control                       
        defaultroute    Add default route through interface                     
        file <f>        Take options from file <f>                              
        modem           Use modem control lines                                 
        mru <n>         Set MRU value to <n> for negotiation                    
See pppd(8) for more options.                                                   
                                                    
/etc/isp10_7.conf                                                               
/etc/isp11.conf                                                                 
/etc/isp12.conf                                                                 
sh: /userfs/bin/zebra: not found                                                
sh: /userfs/bin/ripd: not found                                                 
Radvd is disabled                                                               
dhcp6s is disabled!                                                             
info, udhcpd (v0.9.9-pre) started                                               
error, Unable to open /etc/udhcpd.leases for reading                            
                                                                                
 goto wlan_boot!!!Interface doesn't accept private ioctl...                     
set (8BE2): Network is down                                                     
                                                                                
 goto write_wlan_first_profile()!!write_wlan_AutoChannelSkipList -(0x20)        
write_wlan_first_profile() freq=0 : Can not get the attribute wl0_HT_BADecline .
write_wlan_first_profile() freq=0 : Can not get the attribute wl0_HT_STBC corre.
write_wlan_first_profile() freq=0 : Can not get the attribute wl0_location_code.
TX_BCN DESC a1fb8000 size = 320                                                 
RX[0] DESC a1fba000 size = 2048                                                 
RX[1] DESC a1fbb000 size = 2048                                                 
cfg_mode=9                                                                      
cfg_mode=9                                                                      
wmode_band_equal(): Band Equal!                                                 
FW Version:CL173766-A                                                           
FW Build Date:20170925114906                                                    
CmdAddressLenReq:(ret = 0)                                                      
CmdFwStartReq: override = 1, address = 1048576                                  
CmdStartDLRsp: WiFI FW Download Success                                         
AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)                              
efuse_probe: efuse = 10000002                                                   
RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5                                   
RtmpEepromGetDefault::e2p_dafault=1                                             
RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1          
NVM is BIN mode                                                                 
1. Phy Mode = 14                                                                
Cal Free IC!!                                                                   
now bb MainSsid mac 60:xx:xx:xx:xx:xx                                           
Country Region from e2p = ffff                                                  
tssi_1_target_pwr_g_band = 34                                                   
2. Phy Mode = 14                                                                
3. Phy Mode = 14                                                                
NICInitPwrPinCfg(14): Not support for HIF_MT yet!                               
NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet!       
mt_mac_init()-->                                                                
mt7603_init_mac_cr()-->                                                         
AsicSetMacMaxLen(1829): Set the Max RxPktLen=1024!                              
<--mt_mac_init()                                                                
        WTBL Segment 1 info:                                                    
                MemBaseAddr/FID:0x28000/0                                       
                EntrySize/Cnt:32/128                                            
        WTBL Segment 2 info:                                                    
                MemBaseAddr/FID:0x40000/0                                       
                EntrySize/Cnt:64/128                                            
        WTBL Segment 3 info:                                                    
                MemBaseAddr/FID:0x42000/64                                      
                EntrySize/Cnt:64/128                                            
        WTBL Segment 4 info:                                                    
                MemBaseAddr/FID:0x44000/128                                     
                EntrySize/Cnt:32/128                                            
AntCfgInit(2570): Not support for HIF_MT yet!                                   
MCS Set = ff ff 00 00 01                                                        
networkmap is gn. launch it.                                                    
AsicSetRalinkBurstMode(4233): Not support for HIF_MT yet!                       
RTMPSetPiggyBack(879): Not support for HIF_MT yet!                              
AsicSetTxPreamble(4220): Not support for HIF_MT yet!                            
AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0                             
Main bssid = 60:45:cb:16:4d:d8                                                  
<==== rt28xx_init, Status=0                                                     
@@@ ed_monitor_init : ===>                                                      
@@@ ed_monitor_init : <===                                                      
jiffies=ffff9928, POLLING_MODE_DETECT_INTV=300                                  
ifconfig used greatest stack depth: 13200 bytes left                            
device ra0 entered promiscuous mode                                             
br0: port 1(ra0) entering forwarding state                                      
br0: port 1(ra0) entering forwarding state                                      
RTMPIoctlMAC():wrq->u.data.length=18, pointer(7fe51240)=60150004=0003001c!      
RTMPIoctlMAC():after trim space, ptr len=17, pointer(822d5000)=60150004=0003001!
ra0       mac:[0x21a04]:0003001c                                                
RTMPIoctlMAC():wrq->u.data.length=18, pointer(7faf7be0)=60200618=D7E87D10!      
RTMPIoctlMAC():after trim space, ptr len=17, pointer(822d5000)=60200618=D7E87D1!
ra0       mac:[0x10618]:d7e87d10                                                
rai0      no private ioctls.                                                    
                                                                                
rai0      no private ioctls.                                                    
                                                                                
rai0      no private ioctls.                                                    
                                                                                
==>Set_Debug_Proc()                                                             
<==Set_Debug_Proc(RTDebugLevel = 0)                                             
BusyBox v1.00 (2018.11.12-18:24+0000) multi-call Disable Virtual Server / Port .
binary                                                                          
                                                                                
Usage: route [{add|del|delete}]                                                 
                                                                                
nf_conntrack_rtsp v0.6.21 loading                                               
port #0: 554                                                                    
nf_nat_rtsp v0.6.21 loading                                                     
insmod used greatest stack depth: 12992 bytes left                              
generate miniupnpd.conf                                                         
_gen_upnp_conf                                                                  
launch upnp                                                                     
start_miniupnpd. force(1)                                                       
stop upnp first                                                                 
Unknown applet: add_ovpn_fw_rules                                               
/userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &        
upnpd_boot                                                                      
_gen_upnp_conf                                                                  
start_miniupnpd. force(1)                                                       
stop upnp first                                                                 
route: SIOC[ADD|DEL]/userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/min&
RT: File exists                                                                 
[write_cur_romfile_in_flash, 456]write running romfile.                         
Unlocking romfile ...                                                           
Writing from /tmp/var/romfile.cfg.gz to romfile ...                             
 [w]                                                                            
[write_cur_romfile_in_flash, 464]write backup romfile in flash.                 
[write_backup_romfile]/userfs/bin/mtd writeflash /tmp/var/romfile.cfg.gz 65536 a
mtd[writeflash]:device=reservearea tclen=65536 tcoffset=0 tcfilelen =65536      
Unlocking reservearea ...                                                       
Writing from /tmp/var/romfile.cfg.gz to reservearea ...                         
enter real action -----tclen:0x10000,tcoffset:0x0                               
writeflash: write 0 'st sector,start from 0x0,0x10000 bytes                     
writeflash: total write 0x10000 bytes                                           
                                                                                
TCAPI save ok.                                                                  
killall: klogd: no process killed                                               
ftp switch turn on                                                              
sip switch turn on                                                              
h323 switch turn on                                                             
rtsp switch turn on                                                             
l2tp switch turn on,sw_state=                                                   
iptables: Bad rule (does a matching rule exist in that chain?).                 
ipsec switch turn on,sw_state=                                                  
iptables: Bad rule (does a matching rule exist in that chain?).                 
iptables: No chain/target/match by that name.                                   
ifconfig: ppp80: error fetching interfa                                         
 #### wan_primary: []                                                           
ce information: Device not found                                                
                                                                                
killall: utelnetd: no process killed                                            
get_iptv_ifname: nas8_0                                                         
check_and_set_iptv_ifname: a9fe94c4(169.254.148.196)                            
_ifconfig: name=nas8_0 flags=1043 IFUP addr=169.254.148.196 netmask=255.255.0.0 
nas8_0: No such device                                                          
wol_boot                                                                        
client_list_boot. launch networkmap                                             
arpstorm_boot                                                                   
Arpstorm_Entry_runin=0                                                          
RTS debug message OFF!                                                          
cmd[0]=restart_pppoe_relay                                                      
cmd[1]=8                                                                        
[1880 service:handle_notifications +41] running: 3 pppoe_relay                  
http_update_allowed_client-restrict_client(0): (0)clients                       
log cicmd 0 (wan  dmt2  set  largeD  2  )                                       
 start_pptpd: getpid= 569                                                       
init_ramusage()                                                                 
msgget ok                                                                       
set_msqid=0                                                                     
ret_val=0                                                                       
mtd[readflash]:device=reservearea tclen=65536 tcoffset=131072                   
Unlocking reservearea ...                                                       
Reading from reservearea to /var/log/tmp_file ...                               
Can't find Node(Info_dot1q), create it.                                         
load: current_uptime = 0m, save_utime = 60m                                     
decomp: fname=/var/tmp/rstats-speed.gz                                          
decomp: gzip -dc /var/tmp/rstats-speed.gz > /var/tmp/rstats-uncomp != 0         
load: speed_count = 0                                                           
load: read source= save_path=                                                   
load_history: fname=/var/tmp/rstats-history.gz                                  
decomp: fname=/var/tmp/rstats-history.gz                                        
                                                                                
Done.                                                                           
decomp: gzip -dc /var/tmp/rstats-history.gz > /var/tmp/rstats-uncomp != 0       
decomp: fname=/var/tmp/rstats-history.gz                                        
decomp: gzip -dc /var/tmp/rstats-history.gz > /var/tmp/rstats-uncomp != 0       
load_history: load failed                                                       
                                                                                
# Enable direct rule                                                            
stop_nat_rules: apply the redirect_rules!                                       
                                                                                
iwpriv used greatest stack depth: 12596 bytes left                              
iptables-restor used greatest stack depth: 12332 bytes left                     
calc: add WIRED as #0                                                           
calc: sync WIRED                                                                
calc: add WIRELESS0 as #1                                                       
calc: sync WIRELESS0                                                            
calc: add ATM as #2                                                             
calc: sync ATM                                                                  
grep used greatest stack depth: 12292 bytes left                                
Unknown applet: add_ovpn_fw_rules                                               
Warning: Driver for device ra0 has been compiled with version 22                
of Wireless Extension, while this program supports up to version 20.            
Some things may be broken...                                                    
                                                                                
calc: add PTM0 as #3                                                            
calc: sync PTM0                                                                 
calc: add PTM1 as #4                                                            
calc: sync PTM1                                                                 
calc: add ETHERNETWAN as #5                                                     
calc: sync ETHERNETWAN                                                          
calc: add BRIDGE as #6                                                          
calc: sync BRIDGE                                                               
*reg=00001fe0 value:200d4008 (ext_switch:0)                                     
Firmware version=[1.1.2.3]                                                      
                                                                                
Please press Enter to activate this console. Can't find Node(Vram), create it.  
Can't find Node(Vram_Entry), create it.                                         
Can't find Node(LogAccess_ToFile), create it.                                   

Available boot loader commands


?                                   Print out help messages.                    
help.                               Print out help messages.                    
go                                  Booting the linux kernel.                   
decomp                              Decompress kernel image to ram.             
memrl <addr>                        Read a word from addr.                      
memwl <addr> <value>                Write a word to addr.                       
dump <addr> <len>                   Dump memory content.                        
jump <addr>                         Jump to addr.                               
flash <dst> <src> <len>             Write to flash from src to dst.             
flashrd <addr> <len>                Read <len> data from flash <addr>.          
gpioon <gpio>                       Trigger power, internet, adsl led on.       
gpiooff <gpio>                      Trigger power, internet, adsl led off.      
xmdm <addr> <len>                   Xmodem receive to addr.                     
miir <phyaddr> <reg>                Read ethernet phy reg.                      
miiw <phyaddr> <reg> <value>        Write ethernet phy reg.                     
cpufreq <freq num> / <m> <n>        Set CPU Freq <156~450>(freq has to be multi)
ipaddr <ip addr>                    Change modem's IP.                          
httpd                               Start Web Server                            
ddrdrv <..>                         Change DDR driving length