ADT iHub (iHUB-3001B-ADT)

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
home automation controller
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
ADT iHub
Model Part Number
iHUB-3001B-ADT
FCC ID
IC ID
Type
home automation controller
CPU1
CPU1 Type
MIPS BMIPS3300 (R1)
CPU1 Speed
240 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Ethernet Port Count
1-WAN
1-100MbE-LAN
Wired Standard
IEEE 802.3/3u

802dot11 OUI: 00:0E:8F (1 E, 1 W), 00:C0:02 (9 E, 4 W)
Ethernet OUI: 00:0E:8F (1 E, 1 W), 00:C0:02 (9 E, 4 W)

Expansion IF types
USB 2.0
USB ports
2
USB Hub Compatible
Untested
Power
12 VDC, 1 A
Connector type
barrel
Flags:
Z-Wave
Other

Default SSID: iHub_XXXXXXXXXXXX

Manuf/OEM/ODM
Retail
FCC approval date 07 June 2012
Country of manuf Taiwan
Radio 1
Chip1
Wireless interface OUI
00:0E:8F, 00:C0:02
Antenna Connector Type
U.FL, RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
13

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

54 Mbps - 2.4GHz 802.11g = G54 class


Overview

This device has a FCC grantee code of iControl Networks.

OEM SerComm (YUC00A-1.6), model NA801-B?

The FCC manual says the device has 32MB RAM and 32MB Flash (NOR).

The OUI on the FCC EUT is 00:C0:02 (SerComm).

Per WiGLE data, the default SSID of the device seems to be iHub_XXXXXXXXXXXX, where XXXXXXXXXXXX is the serial number (w/ lower case letters). The S/Ns seem to start with 006035. Additionally, a 00:0E:8F (SerComm) OUI is also used with this pattern - it is presumed to also be used with this device.