2Wire HomePortal 1000HW

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
b (B11)
access point, dsl modem
Support
Wikipedia
WikiDevi.wi-cat.ru
Platform
BrandModelRev
2Wire HomePortal 1000HW
FCC ID
Type
access point, dsl modem
CPU1
2Wire Medusa
Flash1 Chip
M-System MD2811-D16-V3Q18
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Unigen UGSV1286T-75 x 2
ETH chip1
2Wire Medusa
ETH chip2
Kendin KS8721B
Ethernet Port Count
1-100MbE-LAN

802dot11 OUI: 00:12:88
Ethernet OUI: 00:12:88

Expansion IF types
none
Power
6 VDC, 2 A
Connector type
barrel
2.5 mm (OD)
5.5 mm (ID)
9.5 mm (LEN)
Other

Default SSID: 2WIREXXX (5 addl. devices)
Default IP address: 172.16.0.1
the IP 172.16.0.1 is used by 4 additional devices
of which 0 are 2Wire devices

Retail
Availability uncommon
FCC approval date 04 September 2003
Country of manuf Malaysia
Radio 1
Chip1
Chip2
Maxim MAX2820
Wireless interface OUI
00:12:88
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
2Wire HomePortal 1000HW2WireTexas InstrumentsMaxim
2Wire HomePortal 1000SW2WireTexas InstrumentsMaxim

For a list of all currently documented 2Wire chipsets with specifications, see 2Wire.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Maxim chipsets with specifications, see Maxim.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.

For a list of all currently documented 2Wire device with specifications, see 2Wire.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"CHIPBOY-SLI" is silkscreened on the board.

The CPU (on the CPU Grave Yard) has a TriMedia core.

Device also has a Silicon Labs Si3101 and HW2000 on board.

The default SSID is 2WIRE followed by the last three digits of the serial number. The default WEP key is printed on the unit under the serial number. The device has no reset button. Resettting the password appears to require 2Wire support to provide a temporary password..

Links of Interest

User guide

Pictures

User Images