WatchGuard Firebox T50 (BS5AE7)
| WatchGuard Firebox T50 | |
|
| |
| WikiDevi.wi-cat.ru | |
|---|---|
| Platform | |
| Brand • Model • Rev |
WatchGuard Firebox T50 |
| Model Part Number |
BS5AE7 |
| Type |
router, security appliance |
| CPU1 |
Freescale (NXP) P1020 |
| CPU1 Speed |
800 MHz |
| Flash1 Chip |
Macronix MX29LV320EBTI-70G |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| Flash2 Chip |
Apacer Model? |
| Flash2 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (SD Card) |
| RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> |
| RAM1 Chip |
Nanya NT5CC512M8DN-DI x 4 |
| ETH chip1 |
Freescale (NXP) P1020 |
| ETH chip2 |
Marvell 88E1512 |
| Switch |
Marvell 88E6171R |
| Ethernet Port Count |
1-1GbE-WAN 6-1GbE-LAN |
| Stock bootloader |
U-Boot 2010.12 |
| Stock FW OS |
Linux 3.12.19-rt30 |
| Expansion IF types |
SD Card slot, USB 2.0 |
| USB ports |
2 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| PoE |
802.3at, 802.3af, standard |
| Power |
48 VDC, 1.25 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) |
| Serial Port (UART) |
yes, console port, RJ45, (115200 8N1) |
|
Flags: RTC w/ battery, power switch, heatsink, PoE | |
|
Additional chips | |
| Other | |
|
Default IP address: 10.0.1.0 | |
| Retail | |
| Availability | End of Life |
| End of Life date | 31 December 2022 |
| ASIN |
B0174X9N5S |
| Country of manuf | Taiwan |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented WatchGuard device with specifications, see WatchGuard.
Overview
Hardware specification
- CPU: Freescale P1020 PowerPC (@800MHz)
- Memory: 2GB (SDRAM) DDR3L
- Storage: 4MB SPI Flash, 8GB SD Card
- Network: 7x Gigabit Ethernet ports
- USB: 2x USB 2.0 ports
- Power: 48V, 1.25A via barrel
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (September 2021) |
Reverting
This section is empty. You can help by adding to it. (September 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (September 2021) |
USB Info
This section is empty. You can help by adding to it. (September 2021) |
vlan Info
This section is empty. You can help by adding to it. (September 2021) |
Pictures
This section is empty. You can help by adding to it. (September 2021) |
Notes
This section is empty. You can help by adding to it. (September 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (September 2021) |
See also
This section is empty. You can help by adding to it. (September 2021) |
- WatchGuard
- Embedded system/router
- Embedded system/security appliance
- Embedded System Freescale (NXP)
- Embedded System P1020
- Embedded System Marvell
- Embedded System 88E1512
- Embedded System 88E6171R
- Wired Embedded System
- Freescale (NXP)
- Marvell
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation