Vodafone DSL-EasyBox 903
From TechInfoDepot
Jump to navigationJump to searchbgn | |
|---|---|
| 802.11n Wireless ADSL2+ with 4x FE ports Gateway | |
| Platform | |
| Brand • Model • Rev |
Vodafone DSL-EasyBox 903 |
| FCC ID |
none specified |
| Board ID |
141952C20002J |
| Type |
wireless router, dsl modem |
| Wireless class |
N300 |
| CPU1 |
Infineon PSB 50702 |
| CPU1 Type |
MIPS |
| CPU1 Speed |
333 MHz ( 2 cores ) |
| Flash1 Type |
NOR |
| Flash1 Chip |
Macronix MX29GL128EL |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Type |
DDR2 |
| RAM1 Chip |
EtronTech EM68B16CWQD-25H |
| ETH chip1 |
Infineon PSB 50702 |
| Switch |
Lantiq PSB 6970 |
| Ethernet Port Count |
4-100MbE-LAN |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
15 VDC, 1.2 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 4-pin header |
| Flags |
ADSL2+, VDSL2 |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.2.1 |
| Default login user |
root |
| Default login password |
123456 |
| Default SSID |
EasyBox-XXXXXX |
| Manuf/OEM/ODM |
Arcadyan VRV752DHW22 |
| Retail | |
| (Est.) release date | December 2011 |
| Radio 1 | |
| Chip1 |
Ralink RT3062F |
| Wireless interface OUI |
74:31:70 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
- SoC: Infineon (Lantiq) VINAX @333MHz (Dual core)
- Flash: Macronix MX29GL128EL (16MB NOR)
- RAM: EtronTech EM68B16CWQD-25H (64MB DDR2)
- WLAN: Ralink RT3062F (802.11bgn 2T2R WiSoC)
- ETH: Lantiq PSB 6970 V; 4x FE (100Mbps) ports
- ADSL: Infineon (Lantiq) XWAY VRX208 (ADSL2+)
- VoIP: Lantiq PEF 4268 V V1.2 (XWAY SLIC120), 3x FXS
See also: ZyXEL P-661HNU-F3 and Arcadyan
Links of Interest
Wikis
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2019) |
Reverting
This section is empty. You can help by adding to it. (December 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2019) |
USB Info
This section is empty. You can help by adding to it. (December 2019) |
vlan Info
This section is empty. You can help by adding to it. (December 2019) |
Pictures
This section is empty. You can help by adding to it. (December 2019) |
Notes
This section is empty. You can help by adding to it. (December 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2019) |
See also
Categories:
- Vodafone
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Infineon
- Embedded System PSB 50702
- Embedded System MIPS
- Embedded System Lantiq
- Embedded System PSB 6970
- Manuf Arcadyan
- Embedded System Ralink
- Embedded System RT3062F
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Infineon
- Lantiq
- Ralink
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation