USRobotics USR8200
From TechInfoDepot
Jump to navigationJump to search
| Secure Storage Router Pro, Firewall / VPN / NAS | |
| Support | |
|---|---|
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
USRobotics USR8200 |
| Board ID |
KN140172 |
| Type |
VPN Router Firewall, NAS, router |
| CPU1 |
Intel XScale IXP422 |
| CPU1 Speed |
266 MHz |
| Flash1 Chip |
Intel E28F128-J3A150 |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Mosel Vitelic V54C3256164VBLT7 x 4 |
| ETH chip1 |
Intel XScale IXP422 |
| ETH chip2 |
Altima AC101L |
| Switch |
Marvell 88E6060 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Stock FW OS |
Linux 2.4.19 OpenRG |
| Expansion IF types |
USB 2.0, 1394a (Firewire) |
| USB ports |
2 |
| USB Hub Compatible |
Untested |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 10-pin header, populated |
| JTAG Port |
yes |
| Flags |
RTC w/ battery backup |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.1.1 |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| (Est.) release date | June 2003 |
| UPC |
738168034963 (UPC DB, On eBay) |
| ASIN |
B0000A1EES |
| Country of manuf | China |
For a list of all currently documented Altima chipsets with specifications, see Altima.
For a list of all currently documented Intel XScale SoC's with specifications, see Intel XScale.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
"P/N:KN140172" is silkscreened on the board in RN's image shown below..
- and on the board shown on the OpenWrt wiki page.
Links of Interest
Wikis
- CPU: Intel XScale IXP422 (FWIXP422AB)
Forum threads
Reviews
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (December 2021) |
Reverting
This section is empty. You can help by adding to it. (December 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (December 2021) |
USB Info
This section is empty. You can help by adding to it. (December 2021) |
vlan Info
This section is empty. You can help by adding to it. (December 2021) |
Pictures
- RayKnight's unit
Notes
This section is empty. You can help by adding to it. (December 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (December 2021) |
See also
This section is empty. You can help by adding to it. (December 2021) |
Categories:
- USRobotics
- Embedded system/VPN Router Firewall
- Embedded system/NAS
- Embedded system/router
- Embedded System Intel XScale
- Embedded System IXP422
- Embedded System Altima
- Embedded System AC101L
- Embedded System Marvell
- Embedded System 88E6060
- OpenWrt Supported
- DD-WRT Supported
- Wired Embedded System
- Intel XScale
- Altima
- Marvell
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation