Tenda W268R (earlier)
bgn | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| wireless router | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Tenda W268R (earlier) | ||||||||||||
| FCC ID | |||||||||||||
| Type |
wireless router | ||||||||||||
| CPU1 |
Ralink RT3050 | ||||||||||||
| Flash1 Chip |
Macronix MX29LV160DBTI-70G | ||||||||||||
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||||||||||
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
| RAM1 Chip |
EtronTech EM638165TS-6G | ||||||||||||
| ETH chip1 |
Ralink RT3050 | ||||||||||||
| Switch |
Ralink RT3050 | ||||||||||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Flags |
schematics | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
192.168.0.1 | ||||||||||||
| Default login user |
admin | ||||||||||||
| Default login password |
admin | ||||||||||||
| Default SSID |
Tenda | ||||||||||||
| Retail | |||||||||||||
| FCC approval date | 13 August 2009 | ||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
Ralink RT3050 | ||||||||||||
| Wireless interface OUI |
C8:3A:35 | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
1x1:1 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| |||||||||||||
| |||||||||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless-N Broadband Router
"V1.0" is silkscreened on the board in the FCC photos.
"V1.1" is silkscreened on the board in the images below (of which the board seems to be identical to the Nexxt Solutions Nebula 150 [W311R] PCB)
The schematics show the device as using a KH29LV320CBTC-70G / KH29LV160CBTC-70G Flash chip and a HY57V641620FTP-7 RAM chip (w/ a note that the second module may not be installed when using RT3050). The device is shown as using one RAM chip in the internal photos.
The power supply included with the router pictured below is a Shenzhen Heweishun Network Technology TEA09-09060 (9V, 0.6A). ID/OD/Len measurements are approximate.
The FCC EUT's label shows it as having a MAC starting with 00:B0:0C. This OUI may be used for some units..
Images
- board shots from some RT3050 based W268R revision
Used PSU(s)
At least some of these routers are using Shenzhen Heweishun Network Technology TEA09-09060s (9V, 0.6A).
| Shenzhen Heweishun Network Technology TEA09-09060 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 50/60 Hz, 0.3 A | |||||
| Input connector: NEMA 1-15P Style: small, horiz. Eff. level: 5 | |||||
| Output: 9 VDC, 0.6 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||