Tenda U9
From TechInfoDepot
Jump to navigationJump to search
abgn+ac | |
|---|---|
| AC650 Auto-Install Mini Wireless Dual Band Adapter | |
|
| |
| Homepage | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Tenda U9 v1 |
| Wireless class |
AC650 |
| Interface |
USB 2.0 |
| Connector |
Male A |
| Form factor |
dongle |
| FCCID | |
| Board ID |
10035490 |
| Chip1 |
Realtek RTL8811CU |
|
OUI: none specified | |
| MIMO status |
1x1:1 |
| Wireless Standards |
IEEE 802.11a/b/g/n/ac |
| 802.11ac |
up to 433 Mbps |
| N-QAM |
up to 200 Mbps |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| 802.11a |
up to 54 Mbps |
| Operating Frequency |
2.4 or 5 GHz |
| Other | |
| Manuf/OEM/ODM | |
| Flags |
Wave2, MU-MIMO, 256QAM |
|
Additional chips | |
| Probable Linux driver | |
| Windows driver | |
| Retail | |
| FCC approval date | 22 May 2018 |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"10035490 V1.1" is silkscreened on the board in the FCC photos.
An 8 MiB GigaDevice GD25Q64CSIG flash chip is present on the board. This stores Windows drivers for the adapter.
Links of Interest
This section is empty. You can help by adding to it. (September 2020) |
Pictures
This section is empty. You can help by adding to it. (September 2020) |
Notes
#ifdef CONFIG_RTL8821C
/*=== Realtek demoboard ===*/
{USB_DEVICE (0bda, b82b), .driver_info = RTL8821C}, /* RTL8821CU */
{USB_DEVICE( 0bda, b820), .driver_info = RTL8821C}, /* RTL8821CU */
{USB_DEVICE (0bda, c821), .driver_info = RTL8821C}, /* RTL8821CU */
{USB_DEVICE (0bda, c820), .driver_info = RTL8821C}, /* RTL8821CU */
{USB_DEVICE (0bda, c82a), .driver_info = RTL8821C}, /* RTL8821CU */
{USB_DEVICE (0bda, c82b), .driver_info = RTL8821C}, /* RTL8821CU */
{USB_DEVICE (0bda, c811), .driver_info = RTL8821C}, /* RTL8811CU */
{USB_DEVICE (0bda, 8811), .driver_info = RTL8821C}, /* RTL8811CU */
{USB_DEVICE (0bda, 2006), .driver_info = RTL8821C}, /* TOTOLINK A650UA v3 */
/*=== Customer ID ===*/
{USB_DEVICE (2001, 331d), .driver_info = RTL8821C}, /* D-Link - DWA-171C */
#ifdef CONFIG_RTL8710B
/*=== Realtek dongle ===*/
{USB_DEVICE (0bda, b711), .driver_info = RTL8710B}, /* RTL8710B = RTL8188GU 1*1 */
MODULE_DEVICE_TABLE(usb, rtw_usb_id_tbl);
int const rtw_usb_id_len = sizeof(rtw_usb_id_tbl) / sizeof(struct usb_device_id);
static struct specific_device_id specific_device_id_tbl[] = {
{.idVendor = 0bda, .idProduct = 8177, .flags = SPEC_DEV_ID_DISABLE_HT},
/* RTL8188CU 1*1 dongle, (b/g mode only) */
{.idVendor = 0bda, .idProduct = 817e, .flags = SPEC_DEV_ID_DISABLE_HT},
/* RTL8188CE-VAU USB minCard (b/g mode only) */
{.idVendor = 0b05, .idProduct = 1791, .flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 13d3, .idProduct = 3311, .flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 13d3, .idProduct = 3359, .flags = SPEC_DEV_ID_DISABLE_HT},
/* Russian customer - AzureWave (RTL8188CE-VAU g mode) */
#ifdef RTK_DMP_PLATFORM
{.idVendor = 0bda, .idProduct = 8111, .flags = SPEC_DEV_ID_ASSIGN_IFNAME},
/* Realtek 5G dongle for WiFi Display */
{.idVendor = 2019, .idProduct = ab2d, .flags = SPEC_DEV_ID_ASSIGN_IFNAME},
/* PCI - Abocom 5G dongle for WiFi Display */
Hardware Modification
This section is empty. You can help by adding to it. (September 2020) |
See also
This section is empty. You can help by adding to it. (September 2020) |