Tenda PA7

From TechInfoDepot
Revision as of 01:55, 15 August 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: |802dot11_prot= → |802dot11_protocols =)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
abgn+ac
Powerline Access Point
Platform
BrandModelRev
Tenda PA7
FCC ID
Board ID
10030831 V1.1
Type
Powerline Access Point
Wireless class
AC650
CPU1
Broadcom BCM47189B0
CPU1 Speed
900 MHz
CPU2
Broadcom BCM60350
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Winbond W631GG6KB-15
ETH chip1
Broadcom BCM47189B0
Ethernet Port Count
1-1GbE-LAN

802dot11 OUI: 50:0F:F5 (3 E, 3 W)
Ethernet OUI: 50:0F:F5 (3 E, 3 W)

Expansion IF types
none specified
Connector type
AC (direct)
Flags
HomePlug AV2 1000, 256QAM
Categorized as
not categorized
Other
Default IP address
???.???.???.???
Default login user
Leave blank
Default login password
admin
Default SSID
Tenda_XXXXXX, Tenda_XXXXXX_5G
Retail
FCC approval date 21 June 2019
Country of manuf China
Radio 1
Chip1
Broadcom BCM47189B0
Wireless interface OUI
50:0F:F5
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11a/n/ac
Radio 2
Chip1
Broadcom BCM47189B0
Wireless interface OUI
50:0F:F5
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

433Mbps - 1SS 5GHz 802.11ac (80MHz chan.),
200Mbps - 1SS 2.4GHz 802.11n (40MHz chan., 256QAM) = 650 Mbps class

AV1000 AC Wi-Fi Powerline Extender

"10030831 V1.1" is silkscreened on the board in the FCC photos.

The device uses Broadcom BCM60350 as the HomePlug controller.

Sold as part of the Tenda PH10 AV1000 ac Wi-Fi Powerline Extender Kit which includes this PA7 with a Tenda P3 powerline adapter. This device does not appear to support configuration as single band with two-stream operation like the ZyXEL PLA5236 with similar hardware does. It is configured to use the Broadcom BCM47189B0 in 2x 1x1:1 mode.

See also

PH10 Datasheet