Telefonica Smart Home Gateway (Picasso)

From TechInfoDepot
Revision as of 01:48, 15 August 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: |802dot11_prot= → |802dot11_protocols =)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
bgn
access point, IoT hub
Platform
BrandModelRev
Telefonica Smart Home Gateway (Picasso)
FCC ID
IC ID
Board ID
ANZ00B-1.6
Type
access point, IoT hub
CPU1
CPU1 Speed
580 MHz
Flash1 Chip
ESMT Model?
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Nanya NT6TU64M16GG-AC
ETH chip1
ETH chip2
Atheros AR8035-A
Ethernet Port Count
1-1GbE-LAN

802dot11 OUI: none specified

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Connector type
barrel
Serial Port (UART)
yes, 3.3V TTL
Flags
Z-Wave, GSM, GPRS

Additional chips
Z-Wave Chip;Sigma Designs (Zensys);ZW0301;;1;

Categorized as
not categorized
Other
Default IP address
???.???.???.???
Manuf/OEM/ODM
SerComm NA930 ZW2G
Retail
FCC approval date 17 September 2013
Country of manuf Taiwan
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

Smart Home Gateway

"ANZ00B-1.6" is silkscreened on the board in the FCC photos.

Radial capacitors on the FCC EUT seem to be Lelon branded.

There is a Telit GE910-QUAD cellular modem (GSM/GPRS, 2.5G)

module on the board (FCC ID: RI7GE910, IC ID: 5131A-GE910)

The power adapter shown is a Sunny SYS1381-1212-W2

(100-240VAC ~ 50-60Hz, 0.5A -> 12VDC, 1.0A).
See also: SerComm NA900
FCC ID: P27NA900A