TRENDnet TEW-735AP

From TechInfoDepot
Revision as of 01:40, 15 August 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: |lan_speed=100M → |lan_speed=100MbE, |lan_speed=100MbEbE → |lan_speed=100MbE, |802dot11_prot= → |802dot11_protocols =)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
bgn
access point
Platform
BrandModelRev
TRENDnet TEW-735AP V1.0R
FCC ID
Type
access point
CPU1
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Switch
Ethernet Port Count
1-100MbE-LAN

802dot11 OUI: none specified

Expansion IF types
none specified
Connector type
barrel
Serial Port (UART)
yes, 3.3V TTL

Additional chips
2.4GHz Power Amplifier IC;RFMD;RF5602;RF, 5602, BW4D;2;

Categorized as
not categorized
Other
Default IP address
192.168.10.100
Default login user
admin
Default login password
randomly generated
Default SSID
TRENDnet735_2.4GHz_XXXX
Manuf/OEM/ODM
Retail
FCC approval date 13 September 2013
Country of manuf Taiwan
Radio 1
Chip1
Realtek RTL8192CE
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

N300 High Power PoE Access Point

"7016A0510008" and "V-1.00" is silkscreened on the board in the FCC photos. The same text is found on the boards of the EnGenius EAP300 and EnGenius EAP150.

The Wi-Fi radio is using two RFMD RF5602 power amplifier ICs.

Default settings are per the FCC manual. They may not be 100% accurate.

The power adapter shown in the FCC external photos is a DVE DSA-12G-12 FUS 120120 (100-240VAC ~ 50/60Hz, 0.3A -> 12VDC, 1A).