Seagate GoFlex Home

From TechInfoDepot
Revision as of 14:23, 16 July 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: 802dot11_prot → 802dot11_protocols, |802dot11_protocols = → |802dot11_protocols =)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
multiple revisions of this device, use caution
FreeAgent GoFlex Home
Seagate GoFlex Home.jpg
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Seagate GoFlex Home
Model Part Number
STAM1000100
Type
NAS
CPU1
Marvell 88F6281
CPU1 Type
ARM v5te
CPU1 Speed
1.2 GHz
Flash1 Type
NAND
Flash1 Chip
Micron 29F2G08AAD
Flash1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Type
DDR2 800
RAM1 Chip
Nanya NT5TU64M16DG-AC
ETH chip1
Marvell 88F6281
ETH chip2
Marvell 88E1116R
Ethernet Port Count
1-1GbE-LAN

Ethernet OUI: 00:10:75 (12 E, 2 W)

Stock bootloader
U-Boot  1.1.4 Cloud Engines
Stock FW OS
Linux 2.6.22.18 Axentra HipServ OS
Expansion IF types
SATA, USB 2.0
USB ports
1
SATA Ports
1
USB Hub Compatible
Untested
Power
12 VDC, 2 A
Connector type
barrel
5.5 mm (OD)
2.1 mm (ID)
9.5 mm (LEN)
Serial Port (UART)
yes, 3.3V TTL, 10-pin header, populated, (115200,8N,1,), J1
Flags
RTC w/ battery, heatsink

Additional chips
1.5/2A, 1MHz Dual Step-down Regulator;Marvell;88PG8227;;2;
Field Programmable DSP Switcher;Marvell;88PG847B;;1;
16V/4A 500kHz Synchronous Step-Down Converter;MPS;MP8708EN;;1;

Categorized as
not categorized
Other
Default IP address
acquired via DHCP
Default login user
root
Default login password
stxadmin
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date October 2010
ASIN B003SU4BXQ Flag of the United States.svg
Country of manuf China
 CPU1 brandFLA1RAM1
Seagate GoFlex HomeMarvell256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
Seagate GoFlex NetMarvell256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
Seagate GoFlex Satellite (500GB)Texas Instruments128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

Overview

"EHDUL4 7D28UL44001R1" and "REV.01" are silkscreened on the board.

Specifications

  • Processor: Marvell Kirkwood @1.2GHz
Architecture: ARMv5te
  • RAM: 128MB (DDR2-800)
  • Flash: 256MB (NAND)
  • USB: 1x USB 2.0
  • SATA: 1x SATA
  • LAN: 1x GbE (RJ45)

The GoFlex Home is a device based on the Marvell Sheeva plug computer platform,
and is the successor to the DockStar and sister device to the GoFlex Net.
Unlike the GoFlex Net, the GoFlex Home comes with a single SATA connection
used by either a 1, 2, or 3 TB hard drive that comes with the device.

Links of Interest

Run Linux on the GoFlex Home

Flashing

Upgrading

Reverting

JTAG-Serial Info

USB Info

vlan Info

Pictures

Retail Images
User Images

Notes

Hardware Modification

See also