Sagemcom F@ST 2804 V5
From TechInfoDepot
Jump to navigationJump to search
bgn | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 300Mbps Wireless N ADSL2+ Modem Router | |||||||||||||
| Homepage | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Sagemcom F@ST 2804 V5 | ||||||||||||
| FCC ID |
none specified | ||||||||||||
| Type |
wireless router, dsl modem | ||||||||||||
| Wireless class |
N300 | ||||||||||||
| CPU1 |
Broadcom BCM63281 | ||||||||||||
| Flash1 Chip |
Spansion S25FL064PIF | ||||||||||||
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
| RAM1 Chip |
SK hynix H5PS5162FFR | ||||||||||||
| ETH chip1 |
Broadcom BCM63281 | ||||||||||||
| Switch |
Broadcom BCM63281 | ||||||||||||
| Ethernet Port Count |
4-100MbE-LAN | ||||||||||||
| Expansion IF types |
USB 2.0 | ||||||||||||
| USB ports |
2 | ||||||||||||
| USB Hub Compatible |
Untested | ||||||||||||
| Power |
12 VDC, 1 A | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Serial Port (UART) |
yes, J6 | ||||||||||||
| Flags |
ADSL2+ | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
192.168.1.1 | ||||||||||||
| Default login user |
admin | ||||||||||||
| Default login password |
admin | ||||||||||||
| Retail | |||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
Broadcom BCM43227 | ||||||||||||
| Wireless interface OUI |
7C:03:4C | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
2x2:2 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| 802.11n |
up to 300 Mbps | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
- 8MB Flash, 64MB RAM
The default SSID pattern may be UTEL_HOME_XXXX.
Links of Interest
This section is empty. You can help by adding to it. (May 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2022) |
Reverting
This section is empty. You can help by adding to it. (May 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2022) |
USB Info
This section is empty. You can help by adding to it. (May 2022) |
vlan Info
This section is empty. You can help by adding to it. (May 2022) |
Pictures
This section is empty. You can help by adding to it. (May 2022) |
Notes
This section is empty. You can help by adding to it. (May 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2022) |
See also
- Sagemcom F@ST 2704N V1 - Broadcom BCM6318/BCM43217 (OpenWrt)
- Sagemcom F@ST 2704 V2 (RTC) - Broadcom BCM6328B0 (OpenWrt)
- Sagemcom F@ST 2804 V2 (MTS) - Broadcom BCM6358U (RKFBG) (2x @300MHz)
- Sagemcom F@ST 2804 V5 (UTEL) - Broadcom BCM63281/BCM43227
- Sagemcom F@ST 2804 V7 rev1 - Broadcom BCM6318 (HW:1704N_1864) PPage
- Sagemcom F@ST 2804 V7 rev2 - Broadcom BCM63281 (KFBG)/BCM43217T (KMLG)
- Mira 2011/ Nanya 2012 (HW: 2704_1864) (Sagemcom 2804)
Categories:
- Sagemcom
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM63281
- Embedded System BCM43227
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation