QNAP HS-210
| Silent & Fanless NAS | |
|
| |
| Homepage | |
|---|---|
| Support | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
QNAP HS-210 |
| Type |
NAS enclosure |
| CPU1 |
Marvell 88F6282 |
| CPU1 Type |
ARM V5 Armada 300 |
| CPU1 Speed |
1.6 GHz |
| Flash1 Chip |
Micron N25Q128A |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) |
| RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3 SDRAM) |
| RAM1 Chip |
SK hynix H5TQ2G83CFR-PBC x 2 |
| ETH chip1 |
Marvell 88F6282 |
| ETH chip2 |
Marvell 88E1318 |
| Ethernet Port Count |
1-1GbE-LAN |
| Stock bootloader |
U-Boot 1.1.4 Marvell 3.5.3 |
| Stock FW OS |
Linux 3.4.6 QTS 4.2.2 |
| Expansion IF types |
SATA II, USB 2.0 (Type A), USB 3.0 (Type A), SD Card slot |
| USB ports |
4 |
| SD/MMC Slots |
1 |
| SATA Ports |
2 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 5 A |
| Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1) |
|
Flags: RTC w/ battery, buzzer, power switch, heatsink | |
|
Additional chips | |
| Other | |
|
Default IP address: 169.254.100.100 | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| End of Life date | 31 December 2020 |
| (Est.) release date | November 2013 |
| (Est.) initial retail price (in USD): | $290 |
| UPC |
885022004911 (UPC DB, On eBay) |
| Newegg | N82E16822107145 |
| ASIN |
B00H3VBKBM |
| Country of manuf | Taiwan |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented QNAP device with specifications, see QNAP.
Overview
"QW01" and "V1.2" are silkscreened on the board.
Hardware specification
- CPU: Marvell 88F6282 @1.6GHz (Armada 300 ARM V5)
- Memory: 512MB (SDRAM) DDR3
- Storage: 16MB SPI NOR Flash, 2x SATA II, SD Card Slot
- Network: 1x Gigabit Ethernet port
- USB: 2x USB 2.0 Type A, 2x USB 3.0 Type A
- Power: 12V, 5A via barrel
Links of Interest
Reviews
- QNAP HS-210 Silent NAS Review on TECHSPOT
- QNAP HS-210 Review on TECH ADVISOR
- QNAP HS-210 2-Bay Media Sharing NAS Review on TweakTown
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (November 2021) |
Reverting
This section is empty. You can help by adding to it. (November 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (November 2021) |
USB Info
This section is empty. You can help by adding to it. (November 2021) |
vlan Info
This section is empty. You can help by adding to it. (November 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (November 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (November 2021) |
See also
This section is empty. You can help by adding to it. (November 2021) |