Netgear ReadyNAS 212
| 2-Bay ReadyNAS Desktop storage | |
|
| |
| Homepage | |
|---|---|
| Support | |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Netgear ReadyNASRN212 |
| Model Part Number |
RN212D22-100 |
| FCC ID |
none specified |
| Board ID |
2976485002 |
| Type |
NAS enclosure |
| CPU1 |
Annapurna Labs Alpine AL21400 |
| CPU1 Type |
ARM Cortex-A15 |
| CPU1 Speed |
1.4 GHz ( 4 cores ) |
| Flash1 Chip |
Spansion S34MS01G200BHI000 |
| Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| Flash2 Chip |
Macronix MX25L512EMI-10G |
| Flash2 Size |
64 KiB 0.0625 MiB <br />65,536 B <br />512 Kib <br />0.5 Mib <br />6.103516e-5 GiB <br /> (SPI NOR) |
| RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (DDR3 SDRAM) |
| RAM1 Chip |
Samsung K4B4G0846D-BYK0 x 4 |
| ETH chip1 |
Annapurna Labs Alpine AL21400 |
| ETH chip2 |
Atheros AR8035-A |
| ETH chip3 |
Atheros AR8035-A |
| Ethernet Port Count |
2-1GbE-LAN |
| Stock bootloader |
U-Boot 2013.10 alpine_db-1.49 |
| Stock FW OS |
Linux;4.1.30.alpine.1; |
| Expansion IF types |
SATA 3.0, USB 3.0 (Type A) |
| USB ports |
3 |
| SATA Ports |
2 |
| eSATA Ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 5 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) |
yes, 4-pin header, populated, (115200 8N1), JP3 |
| JTAG Port |
yes, 20-pin header, populated, JP5 |
|
Flags: eSATA, RTC w/ battery backup, fan, heatsink, LACP, SNMP | |
|
Additional chips | |
| Other | |
|
Default IP address: acquired via DHCP | |
| Manuf/OEM/ODM | |
| Retail | |
| UPC |
606449110913 (UPC DB, On eBay) |
| Newegg | N82E16822122201 |
| ASIN |
B015S0Y4YY |
| Country of manuf | China |
For a list of all currently documented Annapurna Labs SoC's with specifications, see Annapurna Labs.
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
- "2976485002" is silkscreened on the main board.
- "2976492901" is silkscreened on the USB/Network board.
- "2976485202" is silkscreened on the SATA board.
Hardware specification
- CPU: Annapurna Labs Alpine AL21400 QuadCore ARM Cortex-A15 (@1.4GHz)
- Memory: 2GB (SDRAM) DDR3
- Storage: 512KiB SPI NOR Flash, 128MB SLC NAND Flash, 2x SATA, 1x eSATA
- Network: 2x Gigabit Ethernet port
- Power: 12V, 5A via barrel
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (August 2021) |
Reverting
This section is empty. You can help by adding to it. (August 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (August 2021) |
USB Info
This section is empty. You can help by adding to it. (August 2021) |
vlan Info
This section is empty. You can help by adding to it. (August 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (August 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (August 2021) |
See also
This section is empty. You can help by adding to it. (August 2021) |