Meraki MR66
From TechInfoDepot
Jump to navigationJump to searchabgn | |
|---|---|
| managed access point | |
| Platform | |
| Brand • Model • Rev |
Meraki MR66 |
| FCC ID | |
| IC ID | |
| Type |
managed access point |
| Wireless class |
AN600 |
| CPU1 | |
| CPU1 Speed |
680 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
EtronTech EM6AA160TSA-5G x 2 |
| ETH chip1 | |
| ETH chip2 |
Atheros Model? |
| Ethernet Port Count |
1-1GbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| PoE |
802.3af, standard |
| Power |
48 VDC, ? A |
| Connector type |
Ethernet (PoE) |
| Serial Port (UART) |
yes |
| JTAG Port |
yes |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
10.128.128.128 |
| Default login user |
admin |
| Default login password |
unit's serial number |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 26 October 2011 |
| UPC |
810979011200 (UPC DB, On eBay) |
| ASIN |
B007SOM1J4 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL, N-Female |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
| Radio 2 | |
| Chip1 |
Atheros AR9223 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL, N-Female |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Overview
This device would appear to be using AR7161 + AR9220 + AR922(3/7)..
Default settings in this entry are per the FCC manual.
Links of Interest
This section is empty. You can help by adding to it. (July 2022) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2022) |
Reverting
This section is empty. You can help by adding to it. (July 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2022) |
USB Info
This section is empty. You can help by adding to it. (July 2022) |
vlan Info
This section is empty. You can help by adding to it. (July 2022) |
Pictures
This section is empty. You can help by adding to it. (July 2022) |
Notes
This section is empty. You can help by adding to it. (July 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (July 2022) |
See also
This section is empty. You can help by adding to it. (July 2022) |
Categories:
- Meraki
- Embedded system/managed access point
- Embedded System Atheros
- Embedded System AR7161
- Manuf Senao
- Embedded System AR9220
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Embedded System AR9223
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Dual-Radio Wireless Embedded System
- Dual-Band
- Atheros
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation