Medialink MWN-WAPR150N
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||
|---|---|---|---|---|---|---|---|
| Wireless-N Broadband Router with Internal Antenna | |||||||
|
| |||||||
| Homepage | |||||||
| Platform | |||||||
| Brand • Model • Rev |
Medialink MWN-WAPR150N | ||||||
| FCC ID | |||||||
| Type |
wireless router | ||||||
| CPU1 |
Ralink RT3050 | ||||||
| Flash1 Chip |
Macronix MX29LV320EBTI-70G | ||||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||
| RAM1 Chip |
EtronTech EM639165TS-6G | ||||||
| ETH chip1 |
Ralink RT3050 | ||||||
| Switch |
Ralink RT3050 | ||||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||
| Expansion IF types |
none specified | ||||||
| Power |
9 VDC, 0.6 A | ||||||
| Connector type |
barrel | ||||||
|
Additional chips | |||||||
| Other | |||||||
|
Default SSID: medialink (2 addl. devices) | |||||||
| Manuf/OEM/ODM | |||||||
| Retail | |||||||
| FCC approval date | 12 March 2010 | ||||||
| UPC |
813077011387 (UPC DB, On eBay) | ||||||
| ASIN |
B0044YU60M | ||||||
| Country of manuf | China | ||||||
| Radio 1 | |||||||
| Chip1 |
Ralink RT3050 | ||||||
| Wireless interface OUI |
14:35:8B | ||||||
| Antenna Connector Type |
none specified | ||||||
| MIMO status |
1x1:1 | ||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||
| 802.11n |
up to 150 Mbps | ||||||
| 802.11g |
up to 54 Mbps | ||||||
| 802.11b |
up to 11 Mbps | ||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||
| |||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Medialink device with specifications, see Medialink.
Overview
It is possible that the hardware of these units may vary...
Per WiGLE and the User Guide, the default SSID seems to be medialink w/ an OUI of 14:35:8B (Mediabridge Products).
Links of Interest
- On the DD-WRT forums (internal photos)
- 4MB Flash (Macronix MX29LV320EBTI-70G) and 16MB RAM (EtronTech EM639165TS-6G) in Broesphs post
- 9V, 0.6A on the label
- similar appearance to the Tenda W268R (later)
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2022) |
Reverting
This section is empty. You can help by adding to it. (July 2022) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2022) |
USB Info
This section is empty. You can help by adding to it. (July 2022) |
vlan Info
This section is empty. You can help by adding to it. (July 2022) |
Pictures
- external
- internal
Notes
This section is empty. You can help by adding to it. (July 2022) |
Hardware Modification
This section is empty. You can help by adding to it. (July 2022) |
See also
This section is empty. You can help by adding to it. (July 2022) |